• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.281.1-281.1
• /
• 2013

Shape control of gold nanocrystal is still one of the most important challenges remaining to achieve geometry dependent properties. Thus far, several strategies have been developed to control the shape of nanoparticles, such as adding capping agents and diverse additives or adjusting the temperature and pH. Here, we used an already established seed-mediated method that allowed us to focus on controlling the growth stage. Cetyltrimethylammonium bromide (CTAB) and ascorbic acid (AA) were used as the ligand and the reducing agent, respectively, without using any additional additives during the growth stage. We investigated how the relative ratio of CTAB and AA concentrations could be a major determinant of nanoparticle shape over a wide concentration range of CTAB and AA. As a result, a morphology diagram was constructed experimentally that covered the growth conditions of rods, cuboctahedra, cubes, and rhombic dodecahedra. The trends in the morphology diagram emphasize the importance of the interplay between CTAB and AA. Furthermore, high-index faceted gold nanocrystal was obtained by two step seeded growth. Already synthesized cubic particles developed into hexoctahedral nanocrystal consisting of 48 identical {321} facets, which indicates that the growth of gold nanocrystal is affected by initial morphology of seed particles. The hexoctahedral gold nanoparticles can be used in catalysis and optical applications which exploiting their unique geometry. Our research can provide useful guidelines for designing various facetted geometries.

• Korean Journal of Poultry Science
• /
• v.50 no.1
• /
• pp.31-39
• /
• 2023

The objective of this study was to investigate the effect of exogenous protease supplementation in diets formulated with poultry by-product meal on growth performance, small intestine magnitudes, and meat physiochemical characters in broiler chickens from 21 to 35 days post-hatch. A total of 120, one-day-old "Arbor Acres Plus" broiler chickens (male: female - 50:50) were allocated one of two dietary treatments to give six replicates and ten birds per cage. Two dietary treatments included a control diet (CON) and a diet supplemented with protease (CON+Pro). At day 35, body weight and feed intakes were measured to calculate the feed conversion ratio for the entire experiment period. Two birds from each pen were euthanized to measure the relative lengths and relative weights of three small intestine sections and meat samples were collected for physiochemical characteristic analyses at 35 days post-hatch. Exogenous protease supplementation did not influence (P>0.05) growth performance but showed a tendency to improve FCR (P=0.082). Protease supplementation showed a tendency to reduce proximal small intestine length (P=0.091). Broilers offered dietary treatments influenced minced meat color where protease supplementation resulted in lower CIE b^* (P<0.001) colorimetric value for yellowness and showed a significant trend (P=0.059) on reducing meat redness CIE a^*. In conclusion, the addition of exogenous protease to a broiler diet formulated with poultry by-product meal did not affect the growth performance, small intestine magnitudes, and meat physiochemical parameters (except CIE b^*) in broiler chickens.

• Advances in nano research
• /
• v.4 no.3
• /
• pp.181-195
• /
• 2016

Addition of nano-$SiO_2$ (NS) to geopolymer composites has been studied through measurement of compressive strengths, FTIR and XRD analysis. Alumino-silicate materials are coarse aggregate included waste concrete and demolished walls with its cementing binder, cement kiln dust (CKD) used and can possess a pronouncing activation for the geopolymer reaction resulting from the high alkali contents within. Materials prepared at water/binder ratios in a range of 0.30: 0.40 under curing of $40^{\circ}C$ and 100% Relative Humidity (R.H.), while the used activator is sodium hydroxide in the ratio of 2 wt. %. First, CKD is added in the ratio from 10 up to 50 wt., %, and the demolished walls was varied depending on the used CKD content, while using constant ratio of waste concrete (40 wt., %). Second step, depending on the optimum CKD ratio resulted from the first one (40 wt. %), so the control geopolymer mix composed of cement kiln dust, demolished walls and waste concrete in the ratio (40:20:40, wt %). Nano-silica partially replaced waste concrete by 1 up to 8%. Results indicated that, compressive strengths of geopolymer mixes incorporating nano-silica were obviously higher than those control one, especially at early ages and specially with 3%NS.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.1003-1007
• /
• 2001

This experiment was conducted to investigate the effects of dietary SAA (sulfur-containing amino acids) on growth performance, nutrient digestibility and blood urea nitrogen (BUN) content, and to determine the optimal SAA:lysine ratio for growing barrows and gilts. A total of 150 pigs (75 barrows and 75 gilts, Landrace${\times}$Yorkshire${\times}$Duroc) were assigned to 6 treatments with 5 replicates of 5 pigs per pen. All pigs were fed diets containing either 1.12 (for barrows) or 1.33% (for gilts) dietary lysine with increasing SAA levels (50, 55 and 60% of dietary lysine) in a $2{\times}3$ factorial design. Throughout the whole experimental period (15 to 54 kg body weight), there was no interaction between sexes and SAA:lysine ratios on ADG, ADFI and FCR. However, increasing the SAA:lysine ratio from 50 to 60% in a diet showed a trend to increase ADG and ADFI of barrows. None of differences in nutrient digestibilities except for calcium and phosphorus were observed and gilts showed higher digestibility of calcium and phosphorus (p<0.05). Among dietary SAA:lysine ratios, there were no differences in apparent nutrient digestibility. Mean values of the essential amino acids (EAA), non-essential amino acids (NEAA) and total amino acids (TAA) digestibilities were higher in gilts than barrows (p<0.01). However, no differences in mean value of EAA, NEAA and TAA digestibilities were observed among dietary SAA:lysine ratios. Between sexes and among SAA:lysine ratios, no significant difference in BUN concentration was observed. This study demonstrated that the optimal inclusion ratio of SAA:lysine was 55% and below 50% in barrows and gilts, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.280-284
• /
• 2015

Au doped $TiO_2$ nanoparticles have been synthesized using a reverse micelle technique combined with metal alkoxide hydrolysis and condensation. Au doped $TiO_2$ was coated with glass substrate. The size of the particles and thickness of the coating can be controlled by manipulating the relative rates of the hydrolysis and condensation reaction of TTIP within the micro-emulsion. The average size of synthesized Au doped $TiO_2$ nanoparticle was about in the size range of 15 to 25 nm and the Au particles formed mainly the range of 2 to 10 nm in diameter. The effect of synthesis parameters, such as the molar ratio of water to TTIP and the molar ratio of water to surfactant, are discussed. The synthesized nanopaticles were coated on glass substrate by a spin coating process. The thickness of thin film was about 80 nm. The degradation of MB on a $TiO_2$ thin film was enhanced over 20 % efficiency by the incorporation of Au.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.4
• /
• pp.307-316
• /
• 2008

The objective of this study is to provide numerical and experimental data that can be used to investigate the performance characteristics of a flat plate fin-tube evaporator in household and commercial refrigerators under frosting conditions. Computer simulations with variations of operating conditions such as air inlet temperature, relative humidity, and geometries were performed to find out optimal design parameters of a fin-tube evaporator for household and commercial refrigerators. The tube-by-tube method was used in the simulation and the frost growth model was considered under frosting conditions. The developed analytical model predicted the decreasing rates of heat transfer capacity and air flow rate ratio within ${\pm}$10% compared to the experimental results for a refrigerator under real operating conditions. As a result, the frost thickness at $3^{\circ}C$ & 80% is increased 40% than that of $-3^{\circ}C$ & 80%, and the frost thickness at $3^{\circ}C$ & 90% is increased 30% than that of $3^{\circ}C$ & 60%. Accordingly, the operating time of the evaporator in the refrigerator was reduced with the increase of the decreasing rate of air flow rate ratio at each condition.

• Plant Resources
• /
• v.1 no.1
• /
• pp.53-59
• /
• 1998

Laboratory experiments for the removal efficiency of heavy metals in land application of sludge, the accumulation and translocation of heavy metals in x plants after transplanting, and the responses of Minari growth with different ratio of land application of sludge were conducted to determine the potential ability of bioremediation with Minari plants. The removal rate and translocation of copper. zinc. lead. and cadmium in soil and plants were compared after transplanting the Minari plants to soil treated with different ratio of sludge. The removal efficiency of heavy metals in soil incorporated with sludge was different with application ratio, but increased with growing periods of Minari plants. The removal efficiency of Cu, Zn, Pb, and Cd ranged from 67 to 74% from 51% to 63%, from 37% to 71%. and from 15% to 25% after 45 days of transplanting. respectively. The amount removed the copper value. 65.9 mg/kg, observed to be highest in soil incorporated 3% sludge after 45 days. The translocation of Cu. Zn. Pb. and Cd from shoots to roots ranged from 18 to 53%, from 17 to 32%, from 14 to 49%, and from 23 to 38% over growing periods. respectively. In plant responses it appeared to be inhibited the plant growth in the treatment compared with the control at early stage of growth. However, the fresh weights of Minari plant increased from 12.5 to 62.5% in the sludge application after 45 days relative to the control. Therefore the Minari might play a useful role in bioremediation of Cu, Zn, Pb, and Cd in the land application of sludge.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.75.1-75.1
• /
• 2013

Atomic layer deposition (ALD) and molecular layer deposition (MLD) are based on sequential, self-limiting surface reactions that produce atomic layer controlled and conformal thin film growth. ALD can deposit inorganic films and MLD can deposit films containing organics. ALD and MLD can be used together to fabricate a wide range of hybrid organic-inorganic alloy films. The relative fraction of inorganic and organic constituents can be defined by controlling the ratio of the ALD and MLD reaction cycles used to grow the film. These hybrid films can be tuned to obtain desirable mechanical, electrical and optical properties. This talk will focus on the growth and properties of metal alkoxide films grown using metal precursors and various organic alcohols that are known as "metalcones". The talk will highlight the tunable mechanical properties of alucone alloys grown using Al2O3 ALD and alucone MLD and the tunable electrical conductivity of zincone alloys grown using ZnO ALD and zincone MLD with DEZ and hydroquinone as the reactants.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.326-334
• /
• 1998

Vascular cambium in 16 species of Salicaceae is nonstoried in all of them and is made up of fusiform and ray initials. The growth of cambial girth occurred by pseudotransverse division of fusiform initials and subsequent apical intrusive growth of daughter initials. The measurements of fusiform initials in tangerntial sections have revealed that the average length varies from 252.2-437.1${\mu}{\textrm}{m}$ in investigated species, with the maximum being in Populus euramericana and the minimum in Salix purprea var. Multinervis. The length of fusiform initials depends on the length of the tapering end wall , therefore, the longer the length of the tapering end wall, therefore, the longer the length of the taperding end wall, the longer the length of fusiform initials. Ray initials have their own size, magnitude, and frequency of occrrence in each species. The relative proportion of ray initials fall about 15.0-24.5% in Salicaceae. Shrubby species of Salix have a lower ratio of ray initials than the species which possess wider trunks. New ray initials are originated from cut off the side or the end of fusiform initials and central partition of a fusiform initials.

• Journal of the Korean Society of Tobacco Science
• /
• v.4 no.2
• /
• pp.41-50
• /
• 1982

To investigate tile effects of growth characteristics on the yield, price per Kg, chemical contents and physical properties in Burley tobacco, ten varieties including Burley 21 were tested in this study. The results obtained are summarized as follows. 1 Forty to fifty days after transplanting, CCR (Crop Growth Rate) was the highest. RCR (Relative Growth Rate) increased up to 40 days, but decreased 50 days when maturation began. High- yielding varieties showed high CCR and RCR till 60 days. 2. Total alkaloid content of cured leaf increased about three times than that of topping stage, but the increased rates were some what different among varieties. 3. Leaf area, stalk diameter, stalk height and days to flower showed positive correlations to yield, whereas leaf thickness and weight per unit leaf area showed negative. 4 Varieties which are high in cured leaf weight ratio and weight per unit leaf thickeners showed relatively poor quality. 5 Nitrogen content was high in leafy and larger stalk diameter variety. 6. There are positive correlation between weight per unit leaf thickness and filling power. The time of combustion was positively correlated to leaf thickness and weight Per unit leaf. 7. It can be concluded that many characteristics are related to the yield, but not quality. It is, there fore, easy to Predict tile yield, but difficult to forecast the qualiffy.