• 대한의용생체공학회:의공학회지
• /
• 제25권5호
• /
• pp.351-359
• /
• 2004

속도계측형 호흡기류센서는 베르누이 원리에 의해 기류속도를 동압력으로 변환하여 호흡기류를 측정하는 센서로써 다수의 샘플링 구멍을 기류통과면 상에 설치해야 한다. 본 연구에서는 속도 샘플 구명들을 비균등하게 배치시킴으로써 단순하게 균등 배치하는 것보다 훨씬 정확한 기류 계측이 가능함을 이론적으로 입증하였다 컴퓨터 시뮬레이션 결과 기류통과면을 다수의 등면적 링으로 분한하고 각각의 링의 면적을 다시 2등분하는 위치에서 속도를 샘플링함으로써 균등 배치할 경우에 비해 계측오차가 약 1/5로 감소하였다. 또한 충 샘플개수가 4개 이상이면 상대오차 1％ 이내의 매우 정확한 기류계측이 가능하였다. 기류 속도분포의 변화에 따른 영향을 비교한 결과 균등 샘플링에 비해 1/2 이하로 둔감하였다. 따라서 본 인구에서 제안하는 비균등 속도샘플링 기법은 속도 계측형 호흡기류센서의 설계시 매우 유용하게 적용될 것으로 판단된다.

• 대한조선학회지
• /
• 제19권1호
• /
• pp.3-14
• /
• 1982

In this paper, the sway added mass of a rectangular cylinder in a restricted water is considered by applying Hamilton's principle as the frequency tends to zero. The present method is an extension of Isshiki's method proposed in 1978. In the present method, it is assumed that the fluid velocity distribution in each subdomain of the fluid can be represented by higher order polynomials while Isshiki assumed linear velocity distribution. The fluid flow is assumed as a rotational motion in the present analysis. However, the results obtained from the present method show good agreement with Bai's numerical results for the case of large clearances between a canal wall and a cylinder. From Kelvin's minimum energy theorem, we can see that the value of sway added mass obtained from the present method approaches the upper bound. The approximate formula obtained in the present study takes a simple form which consists of the dimensions of the canal and the cylinder. The present formulae are derived for the cases of a rectangular cylinder swaying at the center of a narrow or wide canal relative to a cylinder, at off-center location in a canal, and in the restricted water with a single wall. From the results of numerical calculation, it is concluded that the sway added mass in restricted waters is more affected by water depth than clearance between a wall and a cylinder.

• 한국전산유체공학회지
• /
• 제20권1호
• /
• pp.1-9
• /
• 2015

A developed code is applied to simulate relative motion of floating bodies in a side-by-side arrangement, including effects of a fender and a hawser. The developed code is based on the flux-difference splitting scheme for immiscible incompressible fluids and the hybrid Cartesian/immersed boundary method. To validate the developed code for free surface flows around deforming boundaries, the water wave generation is simulated, which is caused by bed movement. The computed wave profile and time histories of wave elevation are compared with other experimental and computational results. The effects of a fender and a hawser are modeled by asymmetric force acting on the floating bodies according to a relative displacement with the bounds, in which the fender and the hawser exert no force on the bodies. It has been observed that the floating body can be accelerated by a gap flow due to a phase difference caused by the free surface. Grid independency is established for the computed time history of the body velocity, based on three different size grids.

• 항공우주시스템공학회지
• /
• 제13권6호
• /
• pp.1-8
• /
• 2019

아음속 유동이 흐르는 후향 계단에서, 입구 경계면에서의 난류를 모사하는 3가지 기법을 조사하였다. 입구 경계면으로 유입되는 평균 유동장과 레이놀즈 응력 프로파일은 실험에서 측정된 결과를 사용하였으며, 입구 경계면의 난류 유동 모사기법으로 synthetic eddy method(SEM), 무작위 변동(random noise) 그리고 균일한 유동 조건(uniform)을 사용하였다. 3차원 유동장의 난류 유동의 모사를 위해 대와동모사(Large Eddy Simulation, LES)를 적용하였다. 3가지 기법에 대한 입구 경계면으로 유입된 유동의 난류 특성과 유동의 재 부착(reattachment) 거리와 속도, 레이놀즈 응력(Reynolds stress)을 비교하였다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.39-45
• /
• 2012

In the standard CFD code, Lagrangian-Eulerian method is very popular to simulate the liquid spray penetrating into gaseous phase. Though this method can give a simple solution and low computational cost, it have been reported that the Lagrangian spray models have numerical grid dependency, resulting in serious numerical errors. Many researches have shown the grid dependency arise from two sources. The first is due to unaccurate prediction of the droplet-gas relative velocity, and the second is that the probability of binary droplet collision is dependent on the grid resolution. In order to solve the grid dependency problem, the improved spray models are implemented in the KIVA-3V code in this study. For reducing the errors in predicting the relative velocity, the momentum gain from the gaseous phase to liquid particles were resolved according to the gas-jet theory. In addition, the advanced algorithm of the droplet collision modeling which surmounts the grid dependency problem was applied. Then, in order to validate the improved spray model, the computation is compared to the experimental results. By simultaneously regarding the momentum coupling and the droplet collision modeling, successful reduction of the numerical grid dependency could be accomplished in the simulation of the high-pressure injection diesel spray.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1276-1286
• /
• 2005

In this paper, the dual stage interaction between the coarse actuator and the fine actuator of an optical disk drive is studied, and the new control method to enhance the track pull-in performance using fine actuator control is proposed. First, the dynamic analysis for the dual stage and the experiments to find the each actuator dynamics are performed. From the experiments, some physical parameters of the actuators were derived, then, some simulations are performed to find the interaction effect of the fine actuator during seek motion. Second, the center servo which suppresses the vibration of fine actuator during seek motion is designed and evaluated. And the fine actuator control to reduce the relative velocity between the target track and beam spot is proposed. From simulations, we show that fine actuator control which has same frequency and same phase of the disturbance is effective to reduce the relative velocity, and this result leads to track pull-in enhancement. Hence, the proposed control method is good approach to improve the track pull-in performance. Finally, the realization of the proposed method and some comments of it are briefly discussed.

• 한국공간정보시스템학회 논문지
• /
• 제10권3호
• /
• pp.31-43
• /
• 2008

주행 시간 예측은 첨단 여행정보 시스템 (ATIS) 및 교통관리 시스템 (ITS)에서 필수적이다. 이를 위해 본 연구에서는 대용량의 데이터 분류에서 높은 정확도와 빠른 속도를 보장하는 $Na{\ddot{i}}ve$ Bayesian 분류화 기법을 기반으로 한 주행시간 예측 알고리즘을 제안한다. 제안된 알고리즘은 도로 네트워크 상에서 사용자 지정 주행 경로에 대하여 주행시간 예측이 가능하며, 또한 주어진 경로에 대해 시간대 별 평균 구간 속도를 고려하여 보다 정확한 주행 시간 예측을 수행한다. 제안된 알고리즘을 기존의 링크-기반 예측(link-based prediction)알고리즘[1] 및 Micro T* 알고리즘[2]과 성능 비교를 수행하였다. 성능 비교 결과, 제안된 기법이 타 예측기법에 비해 MARE (mean absolute relative error)가 크게 감소하여 성능이 향상되었음을 보였다.

• Journal of Biosystems Engineering
• /
• 제17권3호
• /
• pp.290-296
• /
• 1992

A prototype calyx-plucking system was designed on the basis of a calyx-plucking method which had been developed in the previous study. This system was composed of a pair of compressive rollers and three pairs of tensile rollers. The performance test for this system revealed that two significant factors of operating conditions were the moisture content of red pepper and the relative velocity between tensile rollers. The newly developed system can be utilized as an efficient calyx-plucking unit in the processing plant for powdering red pepper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.672-675
• /
• 1996

This paper presents algorithm including Kalman filter for transfer alignment of velocity and quaternion matching method, when master inertial navigation system is a gimbled type and slave inertial navigation system is a strapdown type on a cruising ship which is naturally in motion of horizontal axis attitude. And relative attitudes are considered on a measurement equation for quaternion matching between master INS and slave INS.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.324-327
• /
• 2001

In this paper, a 24GHz FMCW radar system which measures the range and the relative velocity of a vehicle in close range is described. The intended ranging accuracy is 15cm and a possible system concept to achieve this objective is presented. The VCO nonlinearity correction method using a reference delay-line and the data extrapolation algorithms based on AR(autoregressive) model are applied. The implemented system shows relatively satisfactory results in ranging accuracy.