• Particle and aerosol research
• /
• v.16 no.4
• /
• pp.131-140
• /
• 2020

Air pollutants emitted from chimneys of coal-fired power plants are considered to be a major source of fine particulate matter in the atmosphere. In order to manage fine particle in the chimney of a coal-fired power plant, it is necessary to know the concentration of fine particle emitted in real time, but the current system is difficult. In this study, a real-time measurement system for chimney fine particle was developed, and measurements were performed on six coal-fired power plants. Through the measurements, the mass concentration distribution according to the particle size could be secured. All six chimneys showed bimodal distribution, and the count median diameters of each mode were 0.5 and 1.1 ㎛. In addition, it was compared with the gravimetric measurement method, and it was determined that the relative accuracy for PM10 was within 20%, and the value measured using the developed measuring instrument was reliable. Finally, three power plants were continuously measured for one month, and as a result of comparing the concentration of PM10 according to the amount of power generation, it was confirmed that the PM10 discharged from the chimney increased in the form of an exponential function according to the amount of power generation.

• ETRI Journal
• /
• v.42 no.4
• /
• pp.575-584
• /
• 2020

Electromagnetic (EM) waves used to send signals under seawater are normally restricted to low frequencies (f) because of sudden exponential increases of attenuation (𝛼) at higher f. The mathematics of EM wave propagation in seawater demonstrate dependence on relative permeability (𝜇_r), relative permittivity (𝜀_r), conductivity (𝜎), and f of transmission. Estimation of 𝜀_r and 𝜎 based on the W. Ellison interpolation model was performed for averaged real-time data of temperature (T) and salinity (S) from 1955 to 2012 for all oceans with 41 088 latitude/longitude points and 101 depth points up to 5500 m. Estimation of parameters such as real and imaginary parts of 𝜀_r, 𝜀_r', 𝜀_r", 𝜎, loss tangent (tan 𝛿), propagation velocity (V_p), phase constant (𝛽), and α contributes to absorption loss (L_a) for seawater channels carried out by using normal distribution fit in the 3 GHz-40 GHz f range. We also estimated total path loss (L_PL) in seawater for given transmission power P_t and antenna (dipole) gain. MATLAB is the simulation tool used for analysis.

• Journal of Internet Computing and Services
• /
• v.2 no.3
• /
• pp.81-92
• /
• 2001

The clustering environment with heterogeneous workstations provides the cost effectiveness and usability for executing applications in parallel. The load balancing is considered as a necessary feature for the clustering of heterogeneous workstations to minimize the turnaround time. Since each workstation may have different users, groups. requests for different tasks, and different processing power, the capability of each processing unit is relative to the others' unit in the clustering environment Previous works is a static approach which assign a predetermined weight for the processing capability of each workstation or a dynamic approach which executes a benchmark program to get relative processing capability of each workstation. The execution of the benchmark program, which has nothing to do with the application being executed, consumes the computation time and the overall turnaround time is delayed. In this paper, we present an efficient task distribution method and implementation of load balancing system for the clustering environment with heterogeneous workstations. Turnaround time of the methods presented in this paper is compared with the method without load balancing as well as with the method load balancing with performance evaluation program. The experimental results show that our methods outperform all the other methods that we compared.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1004-1010
• /
• 1998

Effects of reaction conditions such as power input and feeding time and feeding mode of reactants on the reaction crystallization of lanthanum oxalate in semi-batch reactor were investigated experimentally. Even though the crystal size distribution of lanthanum oxalate was always monomodal, its mean crystal size was significantly varied with the reaction conditions. As the power input and reactant feeding rate increased, the mean crystal size was reduced and the relative induction time was prolonged. The mean crystal size produced in oxalic acid feeding mode was smaller than that in lanthanum chloride feeding mode, but the trend of the relative induction time with the feeding mode was reverse to that of the mean crystal size. The crystal morphology of lanthanum oxalate, which was produced within the ranges of the reaction conditions in our experiment, was maintained as a needle shape.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.2
• /
• pp.111-117
• /
• 2019

We investigated the variations in the magnetic-field distribution and power transmission efficiency, resulting from changes in the relative positions of the transmitting and receiving coils, for electromagnetic-induction-type wireless power transmission using an elliptical receive coil. Results of simulations using a high-frequency structure simulator were compared to actual measurement results. The simulations showed that the transmission efficiency could be maintained relatively stable even if the alignment between the transmitting and receiving coils was changed to some extent. When the centre of the receiving coil was perfectly aligned with the centre of the transmitting coil, the transmission efficiency was the maximum; however, the degree of decrease in the transmission efficiency was small even if the centre of the receiving coil moved by ± 10mm from the centre of the transmitting coil. Therefore, it is expected that the performance of the wireless power transmission system will not be degraded significantly even if perfect alignment is not maintained. The results suggested a standardized application method of wireless transmission in the utilization of wireless power for implantable sensors.

• Journal of Sasang Constitutional Medicine
• /
• v.15 no.3
• /
• pp.124-138
• /
• 2003

Objectives : To evaluate the properness and effectiveness of the question categories concerning 'sasang constitutional characteristics of mind', used in Iksan Wonkwang Oriental Medicine. Methods : We statistically analyzed data from those 1335 patients focussing on 'relative discrimination ability' to sasang constructions and 'response ratio'. Patients included in this research are only those who had been well treated in Iksan Wonkwang Oriental Medicine during the Period of three years from 2000 to 2002. The data are obtained through the electronic chart developed by Kim Jong-Yeal, and analyzed using the statistical Package SPSS. Results: In total characteristics of mind, the question category of 'timid' has high discriminating power and effectiveness to Soeum type, more in women than men, and especially with an age of 21 or more; The category of 'hasty-tempered' to Soyang type in women with all ages and men with ages 21-40; The category of 'broad-minded' to Taeum type with ages 41 or more; The category of 'timid and broad-minded' to Soyang type, and especially high to women with ages 41 or more. Question categories concerning response type in anger were estimated to have different response patterns to sasang constructions only for ages 21 or more by $X^2$2 test. The question category of 'bear and last long' has high discriminating power and effectiveness to Soeum type, more in men than women, and increasingly to ages; The category of 'impatient and disarmed quickly' to Soyang type in both women and men, especially with ages 21 or more; The category of 'impatient' to Soyang type women or with ages 21 or more. Other categories have low discriminating power or low effectiveness. Concernig expression type of one's thought, the question category of 'straightly' has high discriminating power and effectiveness to Soyang type, more in wemen than men, and especially to ages 21 or more; The category of 'tender' to Soeum type, in women or with ages 40 or less; The category of 'indirectly' to Taeum type in men or with ages 41 or more; The category of 'straightly and stuborn' to Soyang type with ages 41 or more; The category of 'indirectly and tender' to Soeum with with ages 20 or less; The category of 'not express and tender' to Soeum type with ages 41 or more; Conclusions : Question categories concerning total characteristics of mind, response type in anger and expression type of one's thought, are partially discriminating and effective to specific constitution according to sex and ages, and some categories are more discriminating and effective when they are composited. But generally, the discriminating power of Taeum constitution group and group with ages 20 or less was too low, so it is necessary to develope question categories for those groups.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.753-757
• /
• 2011

The possibility of implementing nonuniform residual dispersion per span (RDPS) in optical links with net residual dispersion (NRD) controlled by precompensation and postcompensation for 960 Gbps WDM transmissions is studied and discussed. The fiber optic communication links investigated in this paper consist of inline dispersion management (DM) for each fiber spans and optical phase conjugator (OPC) at mid-way of total transmission length in order to compensate for WDM signal distortions due to group velocity dispersion (GVD) and nonlinearities. It is confirmed that the effect of nonuniform RDPS distribution on system performance is not significant. It is also confirmed that the optimal NRD is obtained to be one of two values of +10 ps/nm or -10 ps/nm, which depend on the deciding of NRD controlled by precompensation or postcompensation, and the exact RDPS configurations. The effective NRD ranges resulting eye opening penalty (EOP) below 1 dB are independent on the exact RDPS distribution for relative low launch power. Therefore, results show the possibility of implementing the flexible optical links to expand network construction for WDM transmission of high bit-rate capability.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.5
• /
• pp.7-20
• /
• 2019

Purpose - This study provides appropriate procedures for EFA to help researchers conduct empirical studies by using PLS-SEM. Research design, data, and methodology - This study addresses the absolute and relative sample size criteria, sampling adequacy, factor extraction models, factor rotation methods, the criterion for the number of factors to retain, interpretation of results, and reporting information. Results - The factor analysis procedure for PLS-SEM consists of the following five stages. First, it is important to look at whether both the Bartlett test of sphericity and the KMO MSA meet the qualitative criteria. Second, PAF is a better choice of methodology. Third, an oblique technique is a suitable method for PLS-SEM. Fourth, a combined approach is strongly recommended to factor retention. PA should be used at the onset. Next, it is recommended using the K1 criterion. In addition, it is necessary to extract factors that increase the total variance explanatory power through the PVA-FS. Finally, it is appropriate to select an item with a factor loading into 0.5 or higher and a communality of 0.5. Conclusions - It is expected that the accurate factor analysis processed for PLS-SEM as previously presented will help us extract more precise factors of the structural model.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.10
• /
• pp.819-825
• /
• 2006

In a SOFC/GT (solid oxide fuel cell/gas turbine) hybrid power generation system, the recuperator is an indispensible component to enhance system performance. Since the expansion ratio to the recuperator core is very large, generally, the effective header design to distribute the flow uniformly before entering the core is crucial to guarantee the required performance. In the present study, we focus on the design of a diffuser type recuperator header with a 90 degree turn inlet port. To reduce the flow separation and recirculation flows, multiple horizontal vanes are used. The number of horizontal vanes is varied from 0 to 24. The air flow velocity is measured at 40 points just behind the core outlet by using a hot wire anemometer. Then, the flow non-uniformity is evaluated from the measured flow velocity. The experimental results showed that inlet air velocity did not effect on relative flow non-uniformity. According to increasing the number of horizontal vanes, flow non-uniformity reduced about $40{\sim}50%$ than without using horizontal vanes.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2011-2018
• /
• 2021

Nowadays, evaluation of amounts and distributions of radioactive waste is an important preparatory step in the process of nuclear reactor decommissioning. For tentative estimation of radioactive waste, a cell-based rigorous 2 step (R2S) method usually is used; however, a poor resolution caused by the averaged flux and spectrum in a cell is still a great challenge because of leading to underestimated or overestimated results. To overcome the poor resolution, several systems were introduced. Neither system, however, provides any function for evaluation of radioactive waste amount and distribution. Thus, it is additionally required to classify radioactive waste based on the results of activation calculation. In this study, the advanced R2S (AR2S) system was developed. To verify the performance of the system, its results for a verification problem were compared with those of the cell-based R2S method. The results showed good agreement, which is to say, within 2.0% relative error. Also, several characteristics of fine/coarse mesh were analyzed. To demonstrate the performance of the AR2S system, the radioactive waste from the Japan Power Demonstration Reactor (JPDR) was estimated, and the result indicated a high-resolution distribution. Therefore, it is expected that the AR2S system will prove useful for precise evaluation of radioactive waste.