• 한국컴퓨터정보학회논문지
• /
• 제25권7호
• /
• pp.75-83
• /
• 2020

셀룰라 시스템에서 D2D 유틸리티 최적화 문제를 연구하도록 한다. 구체적으로, Non-Convex 최적화 문제의 복잡도를 완화하도록 해주는 오목함수 결정규칙을 제안하고자 한다. 일반적으로, 유틸리티 함수는 신호와 간섭의 함수이며, 해법이 복잡한 Non-Convex 형태를 가진다. 본 논문에서는 간단한 해법을 찾고자 유틸리티 함수를 간섭관점에서 분석한다. 먼저 D2D 수신단에서의 간섭 레벨을 의미하는 '상대간섭'과 간섭을 주요간섭으로 간략화하는 '간섭주요화'를 수식적으로 정의한다. 정의한 간섭주요화를 바탕으로 간단한 해법의 기반이 되는 오목함수 결정규칙과 최적화 해법이 간단한 Convex Optimization 해법을 제안하도록 한다. 실험결과를 통하여 유틸리티 함수는 D2D 적용시나리오에 해당하는 수치인 상대간섭 0.1 이하에서는 오목함수임을 확인하였다. 또한, 제안하는 Convex Optimization 해법은 상대간섭 수치 0.1 이하에서 적용이 가능함을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.177-180
• /
• 2001

This paper describes the calibration method and the evaluation method of relative expanded uncertainty for a multi-axis force/moment sensor. This sensor should be calibrated to be use in the industry. Now, the confidence of the calibration result is expressed with interference error. But it is no inaccurate, because an interference error, besides, a reproducibility error of the sensor, a error of this six-axis force/moment sensor calibrator, and so on. Thus, in order to accurately evaluate the relative expanded uncertainty of it, the concept of the uncertainty should be induced, and these errors must be contained in the relative expanded uncertainty. In this paper, the calibration method is exhibited and the evaluation method of the relative expanded uncertainty is also exhibited. And, a six-axis force/moment sensor was calibrated and the relative expanded uncertainty was evaluated.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2020년도 제62차 하계학술대회논문집 28권2호
• /
• pp.81-82
• /
• 2020

Non-convex 최적화 문제의 복잡도를 완화하도록 해주는 오목함수 결정규칙을 제안한다. 전송용량을 나타내는 유틸리티 함수는 신호와 간섭의 함수이며, non-convex이다. 유틸리티 함수를 간섭관점에서 분석한다. '상대간섭'과 '간섭주요화'를 정의한다. 상대간섭은 D2D 수신단에서의 간섭레벨을 나타낸다. 간섭주요화는 간섭을 주요간섭으로 간략화한다. 간섭주요화를 기반으로 하는 오목함수 결정규칙을 제안한다. 실험결과를 통하여 유틸리티 함수는 상대간섭 0.1 이하에서는 오목함수임을 확인하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.5-11
• /
• 2002

This paper describes the methods for calibration and evaluation of the relative expanded uncertainty of a multi-axis force/moment sensor. In order to use the sensor in the industry, it should be calibrated and its relative expanded uncertainty should be also evaluated. At present, the confidence of the sensor is shown with only interference error. However, it is not accurate, because the calibrated multi-axis force/moment sensor has an interference error as well as a reproducibility error of the sensor, etc. In this paper, the methods fur calibration and for evaluation of the relative expanded uncertainty of a multi-axis force/moment sensor are newly proposed. Also, a six-axis force/moment sensor is calibrated with the proposed calibration method and the relative expanded uncertainty is evaluated using the proposed uncertainty evaluation method and the calibration results. It is thought that the methods fur calibration and evaluation of the uncertainty can be usually used for calibration and evaluation of the uncertainty of the multi-axis force/moment sensor.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.456-464
• /
• 2013

Passive sonar in submarine can detect the target in long range and can attack using it. There are many noises which can be received at passive sonar of submarine. When noise received in the sonar it make diverse interference pattern depend on the ocean ambient and movement scenario. Interference pattern can be explained by theory of waveguide invariant. In this paper, analyze the interference pattern according to the relative motions of surface ship and submarine. And analyze the occurrence reason of 2 kinds of interference patterns those are usually display on the submarine console. The results show that if relative speed of submarine and target increase then gradient of interference pattern will increase. And closest point approach of submarine and target decrease then gradient of interference pattern will increase. Bathtube pattern usually appear when target pass though close to submarine and Pinetree pattern appear target pass though above of submarine.

• Journal of Communications and Networks
• /
• 제6권2호
• /
• pp.93-105
• /
• 2004

This paper discusses cyclostationary interference suppression for multiuser wired communication systems. Crosstalk interference from digital signals in multipair cables has been shown to be cyclostationary. Many crosstalk equalization or suppression techniques have been proposed which make implicit use of the cyclostationarity of the crosstalk interferer. In this paper, the convergence and steady-state behaviors of a fractionally spaced equalizer (FSE) in the presence of multiple cyclostationary crosstalk interference are thoroughly analyzed by using the equalizer's eigenstructure. The eigenvalues with multiple cyclostationary interference depend upon the folded signal and interferer power spectra, the cross power spectrum between the signal and the interferer, and tile cross power spectrum between the interferers, which results in significantly different initial convergence and steady-state behaviors as compared to the stationary noise case. The performance of the equalizer varies depending on the relative clock phase of the symbol clocks used by the signal and multiple interferers. Measued characteristics as well as analytical model of NEXT/FEXT channel are used to compute the optimum and worst relative clock phases among the signal and multiple interferers.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권11호
• /
• pp.5497-5512
• /
• 2016

An improved optimal weights based on parallel interference cancellation algorithm has been proposed to cancel for interference induced by multi-user access satellite to ground uplink system. Due to differences in elevation relative motion between the user and the satellite, as well as access between users, resulting in multi-user access interference (Multi-user Access Interference, MUI), which significantly degrade system performance when multi-user access. By steepest gradient method, it obtained based on the MMSE criterion, parallel interference cancellation adjust optimal weights to obtain the maximum SINR. Compared to traditional parallel interference cancellation (Parallel Interference Cancellation, PIC) algorithm or serial interference cancellation ( Successive interference Cancellation, SIC), the accuracy of which is not high and too many complex iterations, we establish the multi-user access to the satellite to ground up link system to demonstrate that the improved WPIC algorithm could be provided with high accuracy and relatively low number of iterations.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.351-363
• /
• 2016

This paper investigates the performance of interference-limited two-way transmission protocols in the Rayleigh fading channels. New lower bound of outage probability and approximate expression of bit error rate (BER) for three-phase two-way relaying (3P-TWR) protocol are derived in closed-form. These expressions are valid for arbitrary signal-to-noise ratio values, numbers of co-channel interferers and amajority of modulation formats employed in the practical system. Then a comparative study is developed for the performance of three two-way transmission protocols, i.e., direct transmission (DT) protocol, two-phase two-way relaying (2P-TWR) protocol and 3P-TWR protocol based on the asymptotic expressions of outage probability and BER. On the basis of the theoretical results, the thresholds on the strength (variance) of direct channel and target rate for the relative performance of different protocols are obtained and the effect of interferences at the terminal and relay on the relative performance is analyzed. The results present key insights on how to choose proper two-way transmission protocol with the knowledge of fading channels, required date rate and modulation format to optimize the system performance in the practical interference-limited scenarios. Simulation results are presented to validate the theoretical analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.2859-2872
• /
• 2019

Interference alignment (IA) has been a powerful approach to achieve the maximum degree of freedom (DoF) for K users multiple-input-multiple-output (MIMO) interference channels. However, due to the feasibility constraint, aligning all the interference signals at each receiver is impractical for large K without symbol extension. In this paper, we propose two best-effort interference alignment (BEIA) schemes that the network selects the maximum number of interfering transmitters to align their signals given the feasibility conditions when each transmitter-receiver pair has a constant number of data streams. Besides, in case of not all interfering signals aligned at each receiver, an upper bound of the average throughput is derived. Simulation results show that the proposed schemes have superiority over the traditional methods, such as time division multiple access (TDMA) and cluster IA(CIA), in low and moderate signal-to-noise ratio (SNR) region in terms of average user throughput. In addition, the proposed max-min relative interference distance alignment scheme outperforms the proposed scheme of equal interfering transmitters number alignment in terms of both average user throughput and minimum user throughput.

• 한국항행학회논문지
• /
• 제16권2호
• /
• pp.219-226
• /
• 2012

3GPP의 LTE/LTE-Advanced 시스템은 OFDM(Orthogonal Frequency Division Multiplexing) 기술적용으로 주파수 할당에 의한 간섭분석 및 주파수 공유평가가 중요하다. 이에 본 논문에서는 LTE 두 사업자/시스템간의 인접채널 간섭 분석에 의한 주파수 공유연구를 수행하였다. 업링크 및 다운링크에서의 시스템 용량 및 스루풋(throughput) 손실에 대한 시뮬레이션 분석이 이루어져 5% 손실율의 주파수 공유기준으로 요구되는 ACIR(Adjacent Channel Interference Ratio) 값을 정의하였다. 유저(user)의 위치, 간섭 대역폭, 시스템 분리 옵셋(separation offset) 등의 파라미터들에 의해 주파수 공유를 위해 요구되는 ACIR 값에 미치는 영향이 분석되었으며, 이러한 결과 데이터 및 간섭분석 방법들은 향후 LTE RF 표준 및 주파수 유효이용에 참고자료로 활용될 것이다.