• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.139-145
• /
• 2006

The purpose of this study is to obtain low-emission and high-efficiency in LPG engine with hydrogen enrichment. The objective of this paper is to clarify the effects of hydrogen enrichment in LPG fuelled engine on exhaust emission, thermal efficiency and performance. The compression ratio of 8 was selected to avoid abnormal combustion. To maintain equal heating value of fuel blend, the amount of LPG was decreased as hydrogen was gradually added. The relative air-fuel ratio was increased from 0.8 to 1.3, and the ignition timing was controlled to be at MBT (minimum spark advance for best torque)

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.299-303
• /
• 2016

Prompt gamma activation analysis using a thermal neutron-guided beam at Japan Atomic Energy Agency JRR-3M was applied for the precise determination of Si in silicon nitride ceramic reference materials [Japan Ceramic Reference Material (JCRM) R 003]. In this study, the standard addition method coupled with internal standard was used for the nondestructive determination of Si in the sample. Cadmium was used as internal standard to obtain the linear calibration curves and to compensate for the neutron beam variability. The analytical result of determining Si in JCRM R 003 silicon nitride fine powder ceramic reference materials using prompt gamma activation analysis was in good agreement with that obtained by classical gravimetric analysis. The relative expanded measurement uncertainty (k = 2) associated with the determined value was 2.4%.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1654-1658
• /
• 2014

High value-added aromatic aldehydes (e.g. vanillin and syringaldehyde) were produced from heavy fraction of bio-oil (HFBO) via catalytic oxidation. The concept is based on the use of metalloporphyin as catalyst and hydrogen peroxide ($H_2O_2$) as oxidant under alkaline condition. The biomimetic catalyst cobalt(II)-sulfonated tetraphenylporphyrin ($Co(TPPS_4)$) was prepared and characterized. It exhibited relative high activity in the catalytic oxidation of HFBO. 4.57 wt % vanillin and 1.58 wt % syringaldehyde were obtained from catalytic oxidation of HFBO, compared to 2.6 wt % vanillin and 0.86 wt % syringaldehyde without $Co(TPPS_4)$. Moreover, a possible mechanism of HFBO oxidation using $Co(TPPS_4)/H_2O_2$ was proposed by the research of model compounds. The results showed that this is a promising and environmentally friendly method for production of aromatic aldehydes from HFBO under $Co(TPPS_4)/H_2O_2$ system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4889-4902
• /
• 2018

It is a challenging issue to improve the energy efficiency of neighbor discovery in WSNs. This paper proposes an optimal discovery model (ODM) for the first time. Based on the model, we investigate the influence of the relative size of two unequal active slots on the energy efficiency. ODM provides the energy optimal value of the length of the larger active slot at a given duty cycle. Other than existing methods, the worst-case latency bound of ODM is only one period. This is a subversive conclusion, because almost all other related methods are based on a wake-up schedule that contains several periods. We theoretically deduce that ODM can reduce worst-case discovery latency by 43.89% compared to Searchlight-Trim when their duty cycles are the same. The simulations verify the advantage of ODM.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.122-127
• /
• 2016

The increasing interest in the environment and climate change around the globe, while the importance of building energy saving is increasing. The building energy simulation program is used for evaluating of energy performance of buildings. However, an input value of wood thermal conductivity in the programs is different from each other. Therefore, in this study, wood thermal conductivity was measured according to species. Through construction database by species of wood, the error of simulation program are able be decreased. In addition, if used as a structural and interior of buildings, the thermal conductivity and moisture of the wood is difficult to apply to the program because they were changed according to the occupant's lifestyle. In this paper, thermal conductivity and moisture content.of wood confirmed changes in the constant temperature and relative humidity ($25^{\circ}C$, 50% R.H.) condition.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2607-2612
• /
• 2020

The present work was aimed to show the possibility of using hydrogel (acrylic/boric acid) for evaluation of the neutron radiation shielding. The influence of acrylic acid concentration, different gamma doses and relative contents of boric acid were studied. The physical properties and the thermomechanical stability of the studied samples were investigated. The shielding property of the composite for neutron was tested by Pu-Be neutron source (5 Ci) under room temperature. The neutron fluence rates and gamma fluxes were measured using a stilbene organic scintillator. The macroscopic effective removal cross-section Σ_R (cm^-1) of fast neutrons and total attenuation coefficient μ (cm^-1) of gamma rays has been studied experimentally. The transmission parameters, the relaxation length (??) and the half-value layer (HVL) were obtained. The obtained results indicated that the addition of boric acid to acrylic acid tends to increase the macroscopic effective removal cross-section Σ_R (cm^-1) to 0.141 compared to 0.094 of ordinary concrete.

• Journal of Powder Materials
• /
• v.12 no.5 s.52
• /
• pp.345-350
• /
• 2005

In this study the nanostructured ${\alpha}-Al_{2}O_3$ ceramics have been fabricated by the combined application of magnetic pulsed compaction (MPC) and subsequent spark plasma sintering (SPS), and their density and hardness properties were investigated. The ${\alpha}-Al_{2}O_3$ prepared by the combined processes showed an increase by $8.4\%$ in density, approaching the value close to the true density, and an enhancement by $210\~400\;Hv$ in hardness, compared to those fabricated by MPC or static compaction method followed by sintering treatment.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1712-1725
• /
• 2022

For improving the seismic performance of the nuclear power plant (NPP) piping system, attempts have been made to apply a dynamic absorber (DA). However, the current piping DA design method is limited because it cannot provide the globally optimum values for the target design seismic loading. Therefore, this study proposes a seismic time history analysis-based DA optimal design method for piping. To this end, the Kriging approach is introduced to reduce the numerical cost required for seismic time history analyses. The appropriate design of the experiment method is used to increase the efficiency in securing response data. A gradient-based method is used to efficiently deal with the multi-dimensional unconstrained optimization problem of the DA optimal design. As a result, the proposed method showed an excellent response reduction effect in several responses compared to other optimal design methods. The proposed method showed that the average response reduction rate was about 9% less at the maximum acceleration, about 5% less at the maximum value of the response spectrum, about 9% less at the maximum relative displacement, and about 4% less at the maximum combined stress compared to existing optimal design methods. Therefore, the proposed method enables an effective optimal DA design method for mitigating seismic response in NPP piping in the future.

• Steel and Composite Structures
• /
• v.47 no.1
• /
• pp.79-90
• /
• 2023

Nonlinear forced vibration properties of three-layered plates containing graphene platelets (GPL) filled skins and an auxetic core have been inquired within the present paper. Owning reduced weight as well as reduced stiffness, rectangle-shaped auxetic cores have been frequently made from novel techniques such as additive manufacturing. Here, the rectangle shape core is amplified via the graphene-filled layers knowing that the layers possess uniform and linear graphene gradations. The rectangle shape core has the equivalent material specifications pursuant to relative density value. The sandwich plate is formulated pursuant to Kirchhoff plate theory while a numerical trend has been represented to discretize the plate equations. Next, an analytical trend has been performed to establish the deflection-frequency plots. Large deflections, core density and GPL amplification have showed remarkable impacts on dynamic response of three-layered plates.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.2
• /
• pp.152-163
• /
• 1990

The purpose of this study is to experimentally analyze the relationship between structural characteristics of cotton fabrics and their cool-and-warm felling in order to develop more comfortable fabrics. Comfort in textile products has been emphasized as consumers preferred performance to fashion of clothing. Thermal comfort of clothing is a basic parameter of the comfort sensation which is usually represented by the cool-and-warm feeling felt by human skin. Cloo-and-warm feeling is perceived by the heat flux which transfers heat energy stored in an object to skin. We feel warm (cool) if the temperature of nerve extremity in skin ascends (descends). As cool-and-warm feeling determines the comfort sensation of clothing, it is important to develop new comfort fabrics. Although considerable works have been made on the body, clothing, and environment, there has been no research study on the structural characteristics of fabrics and their cool and warm feeling. Cool-and-warm feeling is closely related to the transient heat transfer property. This research study used the cotton fabrics manufactured in Korea as sample and measured $q_{max}$ value with thermal property measuring instrument (Thermo-Labo II type). $q_{max}$ values estimated by polynomial regression equation were compared with those observed in this study. This study also identified the structural parameters of cotton fabrics for a specific range of $q_{max}$ values. The findings of this study can be summarized as follows: 1) As the thickness, porosity and air permeability of cotton fabrics increase, $q_{max}$ value decreases. 2) As the fabric count and over factor of cotton fabrics increase, $q_{max}$ value also increases. 3) $q_{max}$ values have been estimated by simple and polynomial regression equations developed in this study. Regression curves which have been plotted by polynomial regression equations also provided with the range of structural parameters for a specific range of $q_{max}$ values of cotton fabrics. This study would be significant in that it has identified the structural Parameters for the cool-and-warm feeling of cotton fabric at $65\%$ relative humidity.