• Journal of the Korean Home Economics Association
• /
• v.39 no.11
• /
• pp.223-232
• /
• 2001

This study, by explaining the relationship between mechanical properties and clothing formability, aims to propose functional data for tailoring performance of fabrics of good tailorability. The KES-FB system was used to measure factors of mechanical properties and also the technique of stepwise-block-regression method was applied to investigate relationship between functional properties and mechanical properties of men's shirks. As results of vasual inspection of men's shirts, it showed that good fabrics had higher value in the LT, bending properties, shear properties and RC than poor fabrics in Total Appearance Value(TAV). And finally, A formula was obtained for calculating the VIA of men's shirts from functional properties which were calculated from the mechanical properties.

• Computers and Concrete
• /
• v.23 no.4
• /
• pp.267-272
• /
• 2019

In order to study the effect of moisture on the compressive strength of low-strength hollow concrete blocks, an experimental study was carried out on 96 samples of locally manufactured hollow concrete blocks collected from three different locations. Uniaxial compression tests were conducted on dry specimens and three types of saturated specimens with moisture contents of 30%, 50% and 80% respectively. The range of moisture content adopted covered the range within which the concrete block samples are saturated in the dry and monsoon seasons. The compressive strength of low-strength hollow concrete blocks decreases with increase in moisture content and the relationship between compressive strength of hollow concrete blocks and their moisture content can be considered to be linear. However, the strength degradation of 30% moist concrete blocks with respect to dry blocks is relatively low and can be considered to be comparable to dry concrete blocks. A formula indicating the relationship between the moisture content and compressive strength of low-strength hollow concrete blocks is also proposed.

• Herbal Formula Science
• /
• v.20 no.1
• /
• pp.81-87
• /
• 2012

Objectives : Ethereal soul and Corporeal soul are very important part of mental activities that have researched and studied not only by ancient medical scientists but also by philosophers and thinkers in historical literature. Methods : There are some differences between ethereal soul and corporeal soul in terms of meaning, generative process, organs and the effects over the human body although they have been studied for a long time and have influenced on each other. Results : The perception of ethereal soul and corporeal soul are considerably limited in Korean medicine compared to their contribution of biological activities. The relationship of the positive and negative, yin and yang, is not even classified. So there is a general lack of understanding of ethereal soul and corporeal soul in oriental medicine course. Conclusions : Therefore, this thesis is designed for discussing the origin and relation of ethereal soul and corporeal soul. Also it would be explained the effect in terms of sleeping that is related Ethereal soul and Corporeal soul.

• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2008

The output of the Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide basic data for the design of regenerator matrix, characteristics of flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, two different wire screens were used. The results are summarized as follows; 1. With the wire screen of No. 50 as regenerator matrices, pressure drop of working fluid of the oscillating flow is shown as 3 times higher than that of one directional flow, not too much influenced by the number of packed meshes. 2. With the wire screen of No. 100 as regenerator matrices, pressure drop of working fluid of the oscillating flow is shown as 2.5 times on the average higher than that of one directional flow, not too much influenced by the number of packed meshes. 3. Under one directional flow which used regenerator matrices with both 200, 240, and 280 wire screens of No. 50 and 320, 370, and 420 wire screens of No. 100, the relationship between the friction factor and Reynold No. is shown as the following formula. $$f=\frac{0.00326639}{Re\iota}-1.29106{\times}10^{-4}$$ 4. Under oscillating flow which used regenerator matrices with both 200, 240, and 280 wire screens of No. 50 and 320, 370, and 420 wire screens of No. 100, the relationship between the friction factor and Reynold No. is shown as the following formula. $$f_r=\frac{0.000918567}{Re\iota}+1.86101{\times}10^{-5}$$ 5. The pressure drop is shown as high in proportion as the number of meshes has been higher, and the number of packed wire screens as matrices increases.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.4
• /
• pp.27-39
• /
• 2007

This paper investigates numerically characteristics of the fluid flow in spatially correlated variable-aperture fractures under effective normal stress conditions. Spatially correlated aperture distributions are generated by using the geostaistical method (i.e. Turning Bands algorithm). In order to represent a nonlinear relationship between the effective normal stress and the fracture aperture, a simple mechanical formula is combined with a local flow model. Obtained numerical results indicate that the fluid flow is significantly affected by the geometry of aperture distribution varying according to the applied effective normal stress as well as the spatial correlation length of aperture distribution. Moreover, by using results simulated in this study, the modified Louis formula representing the relationship between the effective normal stress and the effective permeability of fracture is proposed.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.4
• /
• pp.67-74
• /
• 2007

Rational method has been widely used to calculate peak runoff drainage design or small watershed because of simplicity and convenience. Runoff coefficient(C) is the most important parameter in the rational method which varies according to rainfall intensity, return period, rainfall duration time and soil characteristics. In practice, constant which is value of C in rational formula has been used from the table, originally based on ASCE. These table value does not consider the upper conditions of the depending factors, hence peak runoff calculation could be in correct. Therefore to calculate C in this paper we have devised an improved formula, considering relationship with rainfall duration, return period and CN of NRCS method. This formula is considered to be more reliable and helpful to the hydrologists and engineers to predict correct peak runoff.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.505-511
• /
• 2014

The EPDM(ethylene-propylene diene monomer) rubbers used for manufacturing engine radiator hoses can be degraded by locally generated electrical stress in addition to thermal and mechanical stresses. This study presents an accelerated life prediction of the EPDM rubber under electrochemical stresses using the Arrhenius formula under various aging temperatures($60^{\circ}C$, $80^{\circ}C$, and $100^{\circ}C$). The modified life prediction formula considers the relationship between the gradient($E_a/R$) and the Arrhenius constant(C). The effects of tensile strain(5%, 10%) on the life of these rubbers were investigated. The aging temperature influences EPDM rubber life, and tensile strain was predicted. It was confirmed that the modified life prediction was within the data deviation level of the test.

• Food Science and Preservation
• /
• v.14 no.5
• /
• pp.469-473
• /
• 2007

The optimal formula for non-frozen pound cake was sought using a central composite design with a quadratic model, by response surface methodology (RSM). Behavior on supercooling, freezing time, theological properties, and sensory attributes of pound cake were studied by using various concentrations of sugar, sorbitol, and glycerol. The freezing temperature of standard pound cake was $-16.16^{\circ}C$. The hardness, freezing point temperature, and sensory properties were shown as a quadratic relationship whereas moisture content was analyzed by a linear model. Optimized formula for non-frozen cake were suggested to include (sugar:sorbitol:glycerol) 77.6:0.0:20.4, 60.0:32.8:16.4, and 70.8:11.2:19.6 (all % of total sugar) by RSM. The freezing tines of optimized non-frozen pound cake were reduced by $27{\sim}45%$. The freezing Points of optimized pound cake were depressed below $-20^{\circ}C$. Sorbitol and glycerol may be used as cryoprotectants and preserve the desired sensory attributes of pound cake at low temperatures.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.77-84
• /
• 2011

The methods of the rational formula and Kajiyama formula have been widely used for estimating the peak flood for design to all kind of hydraulic structure. However, there are many limitations and we have to apply these methods to ungauged basin. These methods require to calculate the Probable Maximum Precipitation (PMP) before determining the Probable Maximum Flood (PMF). Creager's method (Creager et al., 1945) is a kind of estimation of specipic flood and this method provided nonlinear equations based on relationship between the drainage area and PMF in order to calculate the PMF of multipurpose dams over medium-sized. But this method has not much applied in Korea. Creager's coefficient is not clear about its application because this method has never been applied to dams in Korea. Based on the PMP for rainfull-runoff models with the PMF of small and larger dams in this research, the range and standard of Creager's coefficients with parameters are proposed to apply basin areas in Korea.

• Animal cells and systems
• /
• v.7 no.4
• /
• pp.331-335
• /
• 2003

Vertebrates with different habitats have different proportions of visual cells, with the rod cells responding to scotopic vision and the cone cells responding to photopic and color vision in their retinas. The present work studied whether the kinds and arrangement patterns of the cone cells and interlocking morphology of the lens were related to the kind of preys and habitats in the genus Zacco. The retinas were observed by a light microscopy using H-E staining method and the interlocking formula of the lens fibers were investigated by a scanning electron microscopy. The interlocking formula of the lens fibers of Z. temmincki is an ' anchor and socket ' connection, and that of Z. platypus is a ' ball and socket ' connection. The cone cells of Z. platypus and Z. temmincki constituted compacted mosaic patterns of row type. Away from the center, the double and single cone cells gradually increased in diameter. Zacco temmincki had identical double cone cells and Z. platypus had non-identical double and single cone cells. The eyes of Z. temminckifeeding on a moving aquatic insects in relative limpid water and swift current of mid and upper stream have better resolution than that of Z. platypus feeding on mainly adhesive algae and some aquatic insects in slightly turbid water of mid stream.