• Magazine of the Korean Society of Agricultural Engineers
• /
• v.19 no.1
• /
• pp.4279-4295
• /
• 1977

Two types of model were established in order to product the soil moisture content by which information on irrigation could be obtained. Model-I was to represent the soil moisture depletion and was established based on the concept of water balance in a given soil profile. Model-II was a mathematical model derived from the analysis of soil moisture variation curves which were drawn from the observed data. In establishing the Model-I, the method and procedure to estimate parameters for the determination of the variables such as evapotranspirations, effective rainfalls, and drainage amounts were discussed. Empirical equations representing soil moisture variation curves were derived from the observed data as the Model-II. The procedure for forecasting timing and amounts of irrigation under the given soil moisture content was discussed. The established models were checked by comparing the observed data with those predicted by the model. Obtained results are summarized as follows: 1. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as the equation(2). 2. Among the various empirical formulae for potential evapotranspiration (Etp), Penman's formula was best fit to the data observed with the evaporation pans and tanks in Suweon area. High degree of positive correlation between Penman's predicted data and observed data with a large evaporation pan was confirmed. and the regression enquation was Y=0.7436X+17.2918, where Y represents evaporation rate from large evaporation pan, in mm/10days, and X represents potential evapotranspiration rate estimated by use of Penman's formula. 3. Evapotranspiration, Et, could be estimated from the potential evapotranspiration, Etp, by introducing the consumptive use coefficient, Kc, which was repre sensed by the following relationship: Kc=Kco$.$Ka＋Ks‥‥‥(Eq. 6) where Kco : crop coefficient Ka : coefficient depending on the soil moisture content Ks : correction coefficient a. Crop coefficient. Kco. Crop coefficients of barley, bean, and wheat for each growth stage were found to be dependent on the crop. b. Coefficient depending on the soil moisture content, Ka. The values of Ka for clay loam, sandy loam, and loamy sand revealed a similar tendency to those of Pierce type. c. Correction coefficent, Ks. Following relationships were established to estimate Ks values: Ks=Kc-Kco$.$Ka, where Ks=0 if Kc,=Kco$.$K0$\geq$1.0, otherwise Ks=1-Kco$.$Ka 4. Effective rainfall, Re, was estimated by using following relationships : Re=D, if R-D$\geq$0, otherwise, Re=R 5. The difference between rainfall, R, and the soil moisture depletion D, was taken as drainage amount, Wd. {{{{D= SUM from { {i }=1} to n (Et-Re-I+Wd)}}}} if Wd=0, otherwise, {{{{D= SUM from { {i }=tf} to n (Et-Re-I+Wd)}}}} where tf=2∼3 days. 6. The curves and their corresponding empirical equations for the variation of soil moisture depending on the soil types, soil depths are shown on Fig. 8 (a,b.c,d). The general mathematical model on soil moisture variation depending on seasons, weather, and soil types were as follow: {{{{SMC= SUM ( { C}_{i }Exp( { - lambda }_{i } { t}_{i } )+ { Re}_{i } - { Excess}_{i } )}}}} where SMC : soil moisture content C : constant depending on an initial soil moisture content $\lambda$ : constant depending on season t : time Re : effective rainfall Excess : drainage and excess soil moisture other than drainage. The values of $\lambda$ are shown on Table 1. 7. The timing and amount of irrigation could be predicted by the equation (9-a) and (9-b,c), respectively. 8. Under the given conditions, the model for scheduling irrigation was completed. Fig. 9 show computer flow charts of the model. a. To estimate a potential evapotranspiration, Penman's equation was used if a complete observed meteorological data were available, and Jensen-Haise's equation was used if a forecasted meteorological data were available, However none of the observed or forecasted data were available, the equation (15) was used. b. As an input time data, a crop carlender was used, which was made based on the time when the growth stage of the crop shows it's maximum effective leaf coverage. 9. For the purpose of validation of the models, observed data of soil moiture content under various conditions from May, 1975 to July, 1975 were compared to the data predicted by Model-I and Model-II. Model-I shows the relative error of 4.6 to 14.3 percent which is an acceptable range of error in view of engineering purpose. Model-II shows 3 to 16.7 percent of relative error which is a little larger than the one from the Model-I. 10. Comparing two models, the followings are concluded: Model-I established on the theoretical background can predict with a satisfiable reliability far practical use provided that forecasted meteorological data are available. On the other hand, Model-II was superior to Model-I in it's simplicity, but it needs long period and wide scope of observed data to predict acceptable soil moisture content. Further studies are needed on the Model-II to make it acceptable in practical use.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Journal of Nutrition and Health
• /
• v.24 no.3
• /
• pp.206-218
• /
• 1991

The influence of stage of lactation on the moisture. total soilds, ash, calcium, phosphorus and Ca/P ratio of human milk was studied. A total number of 32 lactating mothers provided 101 samples collected at 4 consecutive stages of lactation : days o to 5 postpartum(colostrum); days 6 to 10 postpartum(transitional): days 25-35 postpartum(mature). and days 55-70 postpartum(mature). Moisture and total solids concentrations showed a little but significant difference at the 25-35 day stage as compared with those of colostrum and then remained stable, but ash levels decreased significantly with the elapse of lactation period. Calcium levels increased significantly from colostrum to transitional milk stage with a further less significant increase at mature stages. Between colostrum and transitional stages, phosphorus concentration showed a significant increase $(9.9\pm2.4$ vs $15.5\pm4.9$ mg/100 ml, p<0.001)but between the 25-35 day and the 55-70 day stage phosphorus values did not change significantly. Ca/P ratios for colostrum. transitional, the 25-35 day and the 55-70 day stages were 2.28, 1.76, 1.68 and 1.95, respectively. No significant relationship was found between ash. calcium, phosphorus or Ca/P ratio of milk and maternal parity. When modified milk formulas were reconstituted using the total solids of human mature milk as amount of the modified milk formula in 100 ml of infant feeding solution. ash, and Ca/P ratio were similar to those of human milk. However considerably higher concentrations of calcium and phosphorus exist in the reconstitution fluid than those observed in human milk.

• Journal of the Korea Concrete Institute
• /
• v.26 no.1
• /
• pp.23-34
• /
• 2014

This study investigates the relationship between the performance of fresh and hardened Ultra-High Performance Concrete (UHPC) without heat treatment. The performance of fresh UHPC is determined by the slump flow test related to the fluidity of concrete mixtures, and the air content test. The variables of these tests are the water to binder ratio, superplasticizer dosages and volume fractions of steel fiber. Generally, insufficient fluidity and excessive air contents in concrete mixtures lead to the insufficient packing density related to the performance of harden concrete. The performance of hardened UHPC is determined by the compressive and flexural tensile tests. The results of the fresh UHPC tests show that there is the linear correlation between each variable and the slump flow diameter, and that the slump flow diameter is linearly decreased as the air content ratio increase. Using these results, the formula is developed to predict the fresh performance before mixing UHPC. The results of the hardened UHPC tests show that the hardened performance is not influenced by the air content ratio in the range of 3.2 to 4.2 per cent. However, the flexural tensile strength dominantly influenced by the volume fractions of steel fiber.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.179-193
• /
• 1994

In the development of engineering designs, decisions are required irrespective of the state of completeness and quality of information, and are formulated under conditions of uncertainty. Furthermore, under conditions of uncertainty the design invokes risks. Thus, in the design of the structures, the currently used deterministic design method does not provide a realistic assessment of the actual safety or the reliability of the structures. It is desirable that decisions required in The process of the design invariably must be made based on the reliability analysis. Properties of soil material are subject to more uncertainty than those of other structural material. In the field of soil mechanics and foundation engineering, it needed to develop reliability-based design methods. In order to simplify the reliability analysis or the reliability-based design process of the structures associated with the active earth pressure, it is necessary to find the variation and the distribution type of the active earth pressure calculated from the basic properties of soils. Monte Carlo simulation is performed to obtain the relationship between the variation of the active earth pressure for cohessionless soils calculated by using Rankine formula and the basic soil properties and the distribution type of the earth pressure. A series of regression equations obtained by utilizing the multi-linear regression analysis is suggested in this paper and the sensitivity of the basic soil properties to the variation of The earth pressure is investigated. The type of distribution of the active earth pressure was found to be the beta distribution in most cases or to be very similar to the beta distribution, if the basic soil variables are normally distributed.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.1-17
• /
• 2018

Related incidents and accidents are frequent after 2000 years, such as the outbreak of the Taian peninsula crude oil spillage and Gumi hydrofluoric acid leakage accident. In the wake of such environmental pollution accidents, Consensus has been formed to enact legislation on liability for the compensation of environmental pollution in 2014 and the rescue, and has been in force since January 2016. Therefore, in the domestic insurance industry, the introduced environmental liability insurance system needs to be managed through the standardization formula of a new insurance model for managing the environmental risk. This study has been carried out by the emergence of a safe insurance model with a risky nature of the risk type, which is one of the services of the knowledge base. The verification of the six assurance media on the occurrence of environmental pollution such as chemical, waste, marine, soil, etc. is expressed through semantic interoperability through this possible ontology. The insurance model was designed and presented by deducing the relationship between the amount of money and the amount of money that was written in the area of existing expertise, In order to exclude the possible consequences, the concept of abstract is conceptualized in the form of a customer, and a plan for the future development of an ontology-based decision support system is proposed to reduce the cost and resources consumed every year. It is expected that standardization of the verification standard of the mass of mass will minimize errors and reduce the time and resources required for verification.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.62-71
• /
• 2018

According to own investigation conducted by Korea Gas Safety Corporation Gas Safety Research Institute in 2017, the length of underground pipes in domestic high-pressure gas pipelines is approximately 770km, of which 84% is buried in Ulsan and Yeosu industrial complexes. In particular, 56% of underground pipelines have been in operation for more than 20 years. This suggests urgent management of buried high pressure gas pipelines. PHMSA in US and EGIG in Europe, major causes of accidents in buried gas pipelines are reported as third party damage, external corrosion and loss of pipe wall thickness. Therefore, it is important to evaluate whether the defects affect the remaining life of the pipe when defects occur in the pipe. DNV and ASME have evaluated the residual strength of pipelines through the hydraulic rupture test using pipe specimens with artifact flaws. Once the operating pressure is known through the residual strength of the pipe, the wall thickness at the point at which the pipe ruptures is calculated. If we know the accurate rate of corrosion growth, we can predict the remaining life of pipe. In the study, we carried out experiments with A53 Grade.B and A106 Grade.B, which account for 80% of domestic buried pipes. In order to modify the existing model equation, specimens with a defect depth of 80% to 90% was tested, and a formula expressing the relationship between defect and residual strength was made.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.15-24
• /
• 2009

Korea is known to have seasonal frost during winter and the effect of low temperatures and water may cause a weakening of pavements. For that reason, frost protection layers have been constructed in pavements to avoid damage caused by frost action. The practies established in USA and Japan have been adopted as anti-frost design methods in Korea. However, the characteristics of Korean soils are different. Additionally, there is no formulation of a reasonable equation for frost penetration depth and the criterion to identify potentially frost-susceptible soils in present pavement design manuals in Korea. Therefore, adequate pavement design procedures in seasonal frost areas, as well as construction and maintenance practices are required. In this paper, frost penetration depths along national roads in Korea were measured and analyzed over several years. The frost penetration depth was analyzed with respect to the provinces of Korea and sunny/ shaded areas. Additionally, measurement results were compared to the formula of the US Army Corps of Engineers and Ifukube in Japan.

• Journal of Korea Water Resources Association
• /
• v.52 no.12
• /
• pp.1057-1066
• /
• 2019

The storage function method is used as a flood prediction model for four flood control offices in Korea as a method to analyze the actual rainfall-runoff relationship with non-linearity. It is essential to accurately estimate the parameters of the storage function method for accurate runoff analysis. However, the parameters of the storage function method currently in use are estimated by the empirical formula developed by the limited hydrological analysis in 2012; therefore, they are somewhat inaccurate. The kinematic wave method is a method based on physical variables of watershed and channel and is widely used for rainfall-runoff analysis. By adopting the two-term storage function method by the conversion of the kinematic wave method, parameters can be estimated based on physical variables, which can increase the accuracy of runoff calculation. In this research, the reproducibility of the kinematic wave method by the two-term storage function method was investigated. It is very easy to estimate the parameters because equivalent roughness, which is an important physical variable in watershed runoff, can be easily obtained by using land use and land cover, and the physical variable of channel runoff can be easily obtained from the basic river planning report or topographic map. In addition, this research examined the applicability of the two-term storage function method to runoff simulation of Naechon Stream, a tributary of the Hongcheon River in the Han River basin. As a result, it is considered that more accurate runoff calculation results could be obtained than the existing one-term storage function method. It is expected that the utilization of the storage function method can be increased because the parameters can be easily estimated using physical variables even in unmeasured watersheds and channels.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.3
• /
• pp.2349-2371
• /
• 1971

1. The historical development of the agriculture in Korea is observed and the future of Korean agriculture is suggested with present situation in order to recommend a direction of policy in agricultural mechanization. 2. A factor analysis of agricultural mechanization The needs of agricultural mechanization in the view of both national need and the armer's desire under the present situation are analyzed with data from the various sources. The researcher found that the agricultural mechanization is badly needed to develop prospective Korean agriculture to future. 3. The direction of agricultural mechanization. It can be said that the position of agriculture in the national economy plays a very important role. This importance should not be ignored by the Politicians in their process of developing long range economy plan. The agricultural mechanization for the modernized Korean agriculture should be directed to increase the most effective results with minimize the least sacrifice. The merry tiller is recommended to the main agricultural machinery in Korea in order to meet its small farming operation un-its(or farm size). Tractor is recommended in the plain area for the crop cultivation. The cooperative cultivation for rice and the upland crops will be developed in the plain area. Tractor, therefore, is recommended for the main agricultural machinery in these areas. Either tractor or merry tiller is recommended to the orchard area by its operating size of the orchard. The researcher also disoussed about the development of animal husbandry on the farm with increasing the farm size in order to develop meadow and pasture nuder the consideration of both the improvement of food consumption and the comprehensive development of national resources. 4. Relationship between the Performance of various agricultural machinery and the economic scale. Because of the agricultural machinery needs an expensive fixed expense(fixed cost) the total expense Per ha of the fixed expense and the operation expense should less than the traditional expense Per Dan Bo with in creased corpgiclds Per Dan Bo. Since the anual fixed expense of the agricultural machinery is figured out by the durability the more the farm size the less fixed expense of machinery is required. The formula of this principle is as follows; fixed expense for Dan Bo=Fixed expense of agricultural machinery farm size(or farming scale) The breaking-even point is the balance point between the expense of the using agricultural machinery and the traditional farming expenses. Labor cost of the Dan Bo is increasing when the management scale increases by the tradititional farming while the machanized management decrease the management cost Per Dan Bo. The reseracher found that the distribution of agricultural machinery will be the adeventeous after the year of 1981 by the result of frguring out the breaking-even point. 5. The Investigate and the conclusion. The purpose of this study is found out the direction of agricultural machanization and the breaking-even point of various agricultural machinery, there for is found out effective of the using various agricultural machinery for Collection cutter, Binder, Footing thresser, Semi-power thresser, Power thresser, Combine, Power rice-Trans-Planter, etc.