• 제목/요약/키워드: Relationship formula

검색결과 406건 처리시간 0.027초

담수환경에서 eDNA와 eRNA를 이용한 Microcystin 합성 남조류 탐색 및 세포 내 Microcystin 생합성 활성 변화 (Detection of Microcystin Synthetic Cyanobacteria and Variation of Intracellular Microcystin Synthesis Using by eDNA and eRNA in Freshwater Ecocystem)

  • 김건희;박채홍;조현진;권대률;황순진
    • 생태와환경
    • /
    • 제56권1호
    • /
    • pp.1-13
    • /
    • 2023
  • 북한강 수역에서 가장 많이 검출되는 Microcystin (MC)을 대상으로 하여 MC 생합성 유전자(mcyA gene), 남조류 세포밀도, MC 농도 사이의 관계를 분석하여 RNA-MC 환산식을 도출하고 남조류 세포 내 존재하는 MC 농도를 예측하였다. 북한강 수역에서 mcyA 유전자는 묵현천 합류 이후 북한강 하류 지점에서 주로 발견되었으며 평균적으로 다른 지점보다 높은 copy number가 발견되었다. 북한강 상류 의암호 수역의 경우, 공지천 지점에서 mcyA 유전자 copy number가 증가하였으며 9월 이후 북한강 수역 전체에서 mcyA 유전자 copy number는 감소하였다. mcyA gene expression은 상류와 하류 수역의 시·공간적 차이가 존재하였으며 여름철 짧은 시기에 집중적으로 발현하였다. mcyA gene expression 양은 MC 농도와 상관성이 매우 높을 뿐만 아니라 MC을 생합성하는 것으로 알려진 Microcystis aeruginosa와 Dolichospermum circinale의 세포밀도와도 통계적으로 유의한 상관성이 존재하였다. RNA-MC 관계를 기반으로 도출된 6개의 환산식은 통계적 유의성을 보이며(p<0.05) 0.9 이상의 높은 상관계수(r)를 나타냈다. eRNA에 존재하는 MC 생합성 유전자 발현량은 수중의 남조독소 물질 합성을 판단하고 유전자의 활성 정도를 빠르게 정량하여 MC 발생 조기경보에 충분히 활용할 수 있을 것으로 판단된다.

고객만족이 기업의 신용평가에 미치는 영향 (The Effect of Customer Satisfaction on Corporate Credit Ratings)

  • 전인수;전명훈;유정수
    • Asia Marketing Journal
    • /
    • 제14권1호
    • /
    • pp.1-24
    • /
    • 2012
  • 본 연구는 고객만족과 기업가치 성과간의 관계를 분석하는 것이 목적이다. 기업가치성과는 주가와 신용등급으로 나눌 수 있는데, 전자는 기업의 시장가치이고 후자는 자금조달비용이라 구분하여 사용되고 있다. 고객만족과 주가와의 관계는 비교적 오래전부터 연구되어 왔으나 신용등급과의 관계는 최근 들어 연구되기 시작하였다. 대표적으로 Anderson and Mansi(2009)의 연구에서는 양자가 긍정적으로 관련된 것으로 밝혀졌으나, 윤상운(2010)이 국내자료를 사용한 연구에서는 그 관계가 입증되지 못하였다. 일치하지 않는 두 연구의 결과에서 아이디어를 얻어 본 연구에서는 고객만족이 신용등급에 긍정적 영향을 미치는 것으로 보고 이를 검증하였다. 두 연구에서 사용한 모델을 참고로 하였고 특히 우리나라 실정에서는 정부지원이 중요한 변수임을 감안하여 이를 포함한 연구모형을 설정하여 검증한 결과 긍정적 관련성이 있는 것으로 나타났다. 추가분석에서 자산규모가 큰 기업보다 작은 기업에서, 제조업보다 서비스업에서 고객만족이 신용등급에 더 유의한 긍정적 영향을 미치는 것으로 나타났다.

  • PDF

천연림 간벌에 기인한 산림생물량 감소가 산림 내부 온도에 미치는 영향 연구 (The Effect on the Forest Temperature by Reduced Biomass Caused by Natural Forest Thinning)

  • 강래열;홍석환
    • 한국환경생태학회지
    • /
    • 제32권3호
    • /
    • pp.303-312
    • /
    • 2018
  • 본 연구는 숲가꾸기가 시행된 부산대학교 제1학술림을 대상으로 간벌 전 후의 산림생물량 및 온도를 실측하여 천연림에서 간벌에 따른 산림생물량 감소와 산림 내부 온도변화의 관계를 확인하고자 하였다. 산림생물량은 간벌 전 후 동일 조사구에 흉고단면적, 수관단면적, 수관체적을 각각 동일한 도출식을 적용하여 도출하였으며, 산림 온도와의 관계성을 파악하고자 하였다. 온도측정은 간벌 이전인 2016년 04월 20일~28일, 간벌 전후인 2016년 07월 26일~11월 04일, 간벌 이듬해인 2017년 04월 15일~05월 08일에 각각 실시하였으며 온도데이터로거를 방형구 내 중앙에 위치한 수목의 지상 2.0m 높이에 북향으로 설치하여 동일기간동안 각 10분마다 데이터가 기록되도록 설치하였다. 간벌이 산림 전역에 진행되어 산림 내 대조구 설정이 어려워 인근 도시에 위치한 동래구 지역별상세관측자료(AWS)를 대조구로 활용하였다. 산림생물량의 변화와 온도와의 관계성을 분석한 결과, 산림 내부 온도 변화는 한낮 시간대(PM12:00~15:00)에 가장 큰 변화를 보였으며, 산림생물량 중 수관체적과 깊은 관계성을 가지고 있었다. 간벌 직후(평균 $0.74^{\circ}C$)보다 간벌 후 1년이 경과한 시점(평균$1.91^{\circ}C$)에서 훨씬 높은 온도 상승을 보였다. 조사구별 수관체적 감소비율과 온도 상승정도를 비교한 결과, 수관체적 감소량이 15.4%로 가장 높았던 리기다소나무군락에서 간벌 직후와 1년 후 분석에서 각각 $1.06^{\circ}C$, $2.49^{\circ}C$로 가장 높은 온도 상승을 나타냈다. 수관체적 감소비율이 5.0%로 가장 적었던 리기다소나무-소나무군락에서 간벌 직후는 그 차이가 없었으며 1년 후 분석에서는 $0.92^{\circ}C$가 상승하였다. 천연림에서 간벌로 인한 산림생물량 감소는 산림내부 온도를 급격히 상승시키는 것을 확인할 수 있었으며 특히, 간벌 직후보다는 이듬해에 더 극심하게 나타나고 있어 제거된 산림생물량에 의한 미기후 변화는 단기간에 회복될 수 없음을 확인할 수 있었다.

알레르기성 직결장염의 임상상과 내시경 및 조직소견 (A study on the clinical courses, sigmoidoscopic and histologic findings of allergic proctocolitis)

  • 이주희;김성신;박재옥
    • Clinical and Experimental Pediatrics
    • /
    • 제51권3호
    • /
    • pp.276-285
    • /
    • 2008
  • 목 적 : 알레르기성 직결장염은 영아 초기에 발생하는 혈변의 중요한 원인으로 알려져 있으나 발병기전, 경과와 예후가 최근 밝혀지고 있으나 아직 명확하지 않다. 이 질환의 자연경과, 내시경 및 조직학적 특성을 알아보고 말초혈액의 호산구 수, 내시경소견의 중증도, 장점막의 호산구 침윤 정도와 발병시기와의 연관성을 알아 보고자 본 연구를 시행하였다. 방 법 : 2003년 4월부터 2007년 4월까지 순천향대학교 부천병원에 내원하여 임상적으로 알레르기 직결장염으로 진단되어 직결장 내시경술을 시행하여 조직검사를 시행할 수 있었던 25명의 영아를 대상으로 의무 기록 정보를 통해 후향적으로 분석하였다. 결 과 : 대상 환아들의 발병 연령은 평균 $15.2{\pm}13.2$주(3-45주)였으며 환아들의 식이는 모유 수유아가 14명(56.0%), 분유 수유아가 1명(4.0%), 혼합 수유아가 6명(24.0%), 모유와 이유식이 1명(4.0%), 분유와 이유식 3명(12.0%)이었다. 수유모 식이에서 원인으로 추정되는 식품으로는 콩류 9례, 우유 및 유제품 6례, 계란 5례, 견과류 3례가 있었다. 직결장 내시경 검사에서 정상 소견이 2례(8.0%), 발적과 부종이 5례(20.0%), 림프절의 증식에 의한 점막의 결절성 비후가 2례(8.0%), 미란이 3례(12.0%), 출혈과 궤양이 1례(4.0%), 점막의 결절성 비후와 미란이 동반되거나 출혈이나 궤양이 동반된 경우가 12례(48.0%)가 관찰되었다. 생검 조직의 전례에서 대장 점막에 호산구 침윤이 관찰되었으며 60/10 high power field 이상 관찰된 경우가 24례(96.0%) 있었고, 점막 및 음와 상피에 호산구의 침윤을 보인 경우는 24례(96.0%), 림프구의 밀집은 20례(80.0%), 점막 근육층 내에 호산구의 침윤을 보인 경우는 2례(8.0%)가 관찰되었다. 말초혈액의 호산구 수는 발병 연령이 어릴수록 증가되어 있었으나 내시경 소견의 중증 정도나 조직에 침윤된 호산구 수와는 무관하였고, 내시경 소견의 증증 정도는 조직에 침윤된 호산구 수나 증상의 발생시기와는 무관하였으며 장점막에 침윤된 호산구 수는 발병시기와 무관하였다. 치료로는 우유, 계란, 콩, 견과류를 수유모의 식단에서 제한한 12명의 모유 수유아 중 10명(83.0%)에서 증상이 호전되었으며 2명의 모유 수유아는 식이 제한 없이 자연 호전되었다. 분유 수유아는 단백 가수 분해 분유로 바꾸고 증상이 호전되었고, 이유식을 하던 4명은 이유식 식이를 제한한 후 증상의 호전을 보였다. 결 론 : 알레르기성 직결장염은 영아기 혈변의 높은 빈도를 보이므로 건강해 보이는 영아에서 소량의 혈변만을 보일 때 우선적으로 감별해야 하고 확진에는 직결장 내시경과 조직 검사가 필요하며 특히 조직학적 검사가 효과적이다. 말초 혈액의 호산구 수는 발병 연령이 어릴수록 증가하는 경향을 보였으며, 식이제한으로 증상이 사라지나 경과가 양호하므로 무리한 식이제한은 대체로 필요 없을 것으로 생각된다.

TENSILE BOND STRENGTH BETWEEN ELASTOMERIC IMPRESSION MATERIALS AND TRAY RESINS DEPENDING ON THE THICKNESS OF THE TRAY ADHESIVE

  • Kim, Tae-Won;Moon, Hong-Seok;Lee, Keun-Woo;Chung, Moon-Kyu
    • 대한치과보철학회지
    • /
    • 제44권6호
    • /
    • pp.699-711
    • /
    • 2006
  • Statement of problem. Elastomeric impression materials have been widely used to obtain an accurate impression. However there have not been enough studies on the influence of the thickness of the tray adhesives on the bonding strength between the trays and the elastomeric impression materials. Purpose. In order to understand the relationship between the thickness of the tray adhesive and the tensile bond strength and to suggest the thickness at which the bonding strength is strongest, tensile bond strength related to the thickness of adhesives of 3 different elastomeric impression materials were tested. Materials and methods. 3 impression materials, $Permlastic^{(R)}$. Regular Set(Kerr Corp., Romulus, Michigan, U.S.A.), $Impregum^{TM}$ $Penta^{TM}$(3M ESPE, Seefeld, Germany), and Aquasil Ultra Monophase Regular Set Smart Wetting.(Dentsply Caulk, Milford, Delaware, U.S.A.), were used in this study, and tray adhesives from the same manufacturers of the impression materials were used, which were Rubber Base Adhesive, Polyether Adhesive, and Silfix, respectively. The tray specimens were prepared by autopolymerizing the tray material(Instant Tray Mix, Lang, Wheeling, Illinois, U.S.A.), and a PVC pipe was used to house the impression material. In group A, tray adhesives were applied in multiple thin layers of 1 to 5 and in group B, adhesives were applied only once, in the thickness equivalent to several applications. Lightness($L^*$) of the adhesion surface was measured with a spectrophotometer(CM-3500d, Konica Minolta, Sakai, Osaka, Japan). The tensile bond strength of the elastomeric impression material and the tray resin was measured with universal materials testing machines(Instron, Model 3366, Instron Corp, Nowood, Massachusetts, U.S.A.). A formula between the number of adhesive application layers and the lightness of the adhesion surface was deduced in group A, and the number of adhesive layers in group B was estimated by applying the lightness($L^*$) to the deduced formula. Results. 1. In group A, a statistically significant increase in tensile bond strength appeared when the number of application layers increased from 1 to 2 and from 4 to 5, and no significant difference was present between 2, 3, and 4 layers in Permlastic. In Impregum, the tensile bond strength was significantly increased when the number of adhesive layers increased from 1 to 3, but no significant difference after 3 layers. In Aquasil, the tensile bond strength significantly increased as the number of application layers increased up to 4 but showed no significant difference between 4 and 5. 2. In group B, the tensile bond strength was decreased when the thickness of the adhesive increased in Permlastic. Impregum showed an increased tensile bond strength when the thickness of the adhesive was increased. In Aquasil, the tensile bond strength increased as the number of adhesive application layers increased up to approximately 2.5 layers but it sharply decreased after approximately 4.5. Conclusion. From the study, the common idea that it is better to apply a thin and single coat of tray adhesive needs correction in more detailed ways, and instructions on some of the tray adhesives should be reconsidered since there were several cases in which the tensile bond strength increased according to the increase in the thickness of the adhesives.

영아 초기에 발생한 호산구성 대장염의 임상적 고찰 (Clinical Features of Eosinophilic Colitis Developed in Early Infancy)

  • 곽정원;박재홍
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • 제8권2호
    • /
    • pp.122-129
    • /
    • 2005
  • 목 적: 영아 초기에 혈변으로 발현하는 호산구성 대장염의 임상 양상과 치료 및 예후 등을 알아보고자 하였다. 방 법: 2002년 8월부터 2004년 2월까지 부산대학교병원 소아과에 혈변을 주소로 내원한 생후 6개월 미만의 영아 중 말초 혈액에 호산구 증가증이 있고 대장 내시경 검사에서 특징적인 소견과 대장 조직 생검에 대한 병리조직학적 검사에서 호산구의 침윤이 현저한 염증이 소견이 보이는 환자들을 대상으로 임상 및 조직 소견을 후향적으로 분석하였다. 결 과: 남아가 5명(83.3%), 여아가 1명(16.7%)이고, 혈변의 최초 발생시 나이는 $79.2{\pm}56.1$일이었다. 모든 환자에게 성장 장애나 식욕 저하 등의 다른 전신 증상은 없었으며, 알레르기의 가족력도 없었다. 수유 방법은 다양했으며, 어머니의 식이 습관에는 우유 섭취가 2예, 땅콩 섭취가 1예 있었고, 아토피 피부염이 동반된 환아가 1명 있었다. 혈액 검사에서 백혈구수가 $11,763{\pm}3,498/mm^3$, 호산구 비율이 $17.0{\pm}4.3%$, 절대 호산구수가 $2,044{\pm}996/mm^3$였다. 대장 내시경 검사 소견은 전예에서 직장과 S상 결장의 점막이 미만성으로 홍반, 울혈 및 과립상 변화를 보였다. 이 중 3명에서 상부 위장관 내시경 검사가 시행되었으나, 특히 소견이 없었다. 대장의 병리조직 검사 소견은 전예에서 심한 호산구 침윤이 동반된 만성 염증 소견을 보였다. 치료로는 2명에서 유단백 가수 분해 분유(HA분유)를 수유하였는데, 1명에서 반응이 있었다. HA 분유에 반응이 없었던 환자를 포함하여 5명에서 스테로이드를 투여하였고, 모든 환자에서 증상과 말초 호산구 수가 정상화된 기간은 $36{\pm}15$일이었다. 치료 후 추적 검사는 평균 $11.6{\pm}8.0$개월 동안 시행했는데 이 기간 중에 증상의 재발은 없었다. 결 론: 영아 초기에 발생하는 호산구성 대장염은 혈변 이외에 다른 성장 장애나 위장관계 증상이 없었고, 음식 알레르기와의 관련성은 없었으며 스테로이드에 좋은 반응을 보였다. 앞으로 호산구성 대장염에 대한 대단위의 연구와 장기간의 추적 관찰이 필요한 것으로 생각된다.

  • PDF

토양수분함량 예측 및 계획관개 모의 모형 개발에 관한 연구(I) (A Study on the Development of a Simulation Model for Predicting Soil Moisture Content and Scheduling Irrigation)

  • 김철회;고재군
    • 한국농공학회지
    • /
    • 제19권1호
    • /
    • pp.4279-4295
    • /
    • 1977
  • Two types of model were established in order to product the soil moisture content by which information on irrigation could be obtained. Model-I was to represent the soil moisture depletion and was established based on the concept of water balance in a given soil profile. Model-II was a mathematical model derived from the analysis of soil moisture variation curves which were drawn from the observed data. In establishing the Model-I, the method and procedure to estimate parameters for the determination of the variables such as evapotranspirations, effective rainfalls, and drainage amounts were discussed. Empirical equations representing soil moisture variation curves were derived from the observed data as the Model-II. The procedure for forecasting timing and amounts of irrigation under the given soil moisture content was discussed. The established models were checked by comparing the observed data with those predicted by the model. Obtained results are summarized as follows: 1. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as the equation(2). 2. Among the various empirical formulae for potential evapotranspiration (Etp), Penman's formula was best fit to the data observed with the evaporation pans and tanks in Suweon area. High degree of positive correlation between Penman's predicted data and observed data with a large evaporation pan was confirmed. and the regression enquation was Y=0.7436X+17.2918, where Y represents evaporation rate from large evaporation pan, in mm/10days, and X represents potential evapotranspiration rate estimated by use of Penman's formula. 3. Evapotranspiration, Et, could be estimated from the potential evapotranspiration, Etp, by introducing the consumptive use coefficient, Kc, which was repre sensed by the following relationship: Kc=Kco$.$Ka+Ks‥‥‥(Eq. 6) where Kco : crop coefficient Ka : coefficient depending on the soil moisture content Ks : correction coefficient a. Crop coefficient. Kco. Crop coefficients of barley, bean, and wheat for each growth stage were found to be dependent on the crop. b. Coefficient depending on the soil moisture content, Ka. The values of Ka for clay loam, sandy loam, and loamy sand revealed a similar tendency to those of Pierce type. c. Correction coefficent, Ks. Following relationships were established to estimate Ks values: Ks=Kc-Kco$.$Ka, where Ks=0 if Kc,=Kco$.$K0$\geq$1.0, otherwise Ks=1-Kco$.$Ka 4. Effective rainfall, Re, was estimated by using following relationships : Re=D, if R-D$\geq$0, otherwise, Re=R 5. The difference between rainfall, R, and the soil moisture depletion D, was taken as drainage amount, Wd. {{{{D= SUM from { {i }=1} to n (Et-Re-I+Wd)}}}} if Wd=0, otherwise, {{{{D= SUM from { {i }=tf} to n (Et-Re-I+Wd)}}}} where tf=2∼3 days. 6. The curves and their corresponding empirical equations for the variation of soil moisture depending on the soil types, soil depths are shown on Fig. 8 (a,b.c,d). The general mathematical model on soil moisture variation depending on seasons, weather, and soil types were as follow: {{{{SMC= SUM ( { C}_{i }Exp( { - lambda }_{i } { t}_{i } )+ { Re}_{i } - { Excess}_{i } )}}}} where SMC : soil moisture content C : constant depending on an initial soil moisture content $\lambda$ : constant depending on season t : time Re : effective rainfall Excess : drainage and excess soil moisture other than drainage. The values of $\lambda$ are shown on Table 1. 7. The timing and amount of irrigation could be predicted by the equation (9-a) and (9-b,c), respectively. 8. Under the given conditions, the model for scheduling irrigation was completed. Fig. 9 show computer flow charts of the model. a. To estimate a potential evapotranspiration, Penman's equation was used if a complete observed meteorological data were available, and Jensen-Haise's equation was used if a forecasted meteorological data were available, However none of the observed or forecasted data were available, the equation (15) was used. b. As an input time data, a crop carlender was used, which was made based on the time when the growth stage of the crop shows it's maximum effective leaf coverage. 9. For the purpose of validation of the models, observed data of soil moiture content under various conditions from May, 1975 to July, 1975 were compared to the data predicted by Model-I and Model-II. Model-I shows the relative error of 4.6 to 14.3 percent which is an acceptable range of error in view of engineering purpose. Model-II shows 3 to 16.7 percent of relative error which is a little larger than the one from the Model-I. 10. Comparing two models, the followings are concluded: Model-I established on the theoretical background can predict with a satisfiable reliability far practical use provided that forecasted meteorological data are available. On the other hand, Model-II was superior to Model-I in it's simplicity, but it needs long period and wide scope of observed data to predict acceptable soil moisture content. Further studies are needed on the Model-II to make it acceptable in practical use.

  • PDF

로우터리 맥류파종기 경운날의 개량시험 (Improvement of Rotary Tine for Barley Seeder Attached to Rotary Tiller)

  • 김성래;김문규;김기대;허윤근
    • Journal of Biosystems Engineering
    • /
    • 제4권1호
    • /
    • pp.1-23
    • /
    • 1979
  • The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

  • PDF

수유기간의 경과에 따른 한국인 인유의 칼슘 및 인 함량의 변화 (Longitudinal Changes in Calcium and Phosphorus Concentrations of Korean Human Milk)

  • 윤태헌;태원찬;이정선
    • Journal of Nutrition and Health
    • /
    • 제24권3호
    • /
    • pp.206-218
    • /
    • 1991
  • 수유기간의 경과에 따른 한국인 인유의 수분, 총고형분, 회분, 칼슘, 인, 칼슘/인의 비 등의 변화를 파악하기 위하여 초유(분만후 0∼5일), 이행유(분만 후 6∼10일), 성숙유(분만 후 25∼35일째 및 분만 후 55∼70일째) 단계로 나누어 longitudinal로 추적·조사하였으며, 시유 및 조제분유와의 비교도 행하였다. 수분과 총고형분은 분만 후 22∼35일에서만 초유에 비하석 유의한 차이를 보여주었으며, 회분은 수유기간의 경과에 따라 점차 감소하는 경향이었다. 칼슘 및 인은 초유단계에 비하여 이행유, 성숙유단계 모두 유의하게 높았는데 칼슘은 분만 후 55∼7O일까지, 인은 분만후 25∼35일까지 계속 증가의 경향을 보여준 것이 특이하였다. 칼슘/인의 비는 초유단계에서 2.28, 이행유단계에서 1.76, 분만 후 25∼35일에서 1.68 그리고 분만 후 55∼70일에서 1.95였는데 이행유 이후 단계에서 모두 유의하게 낮았다. 회분, 칼슘, 인, 칼슘/인의 비에서 초산부와 경산부간에는 차이가 없었다. 성숙유의 총고형분 함량을 시판 국산 조제분유의 조유농도로해서 계산하여 본 바 회분과 칼슘/인의 비는 인유의 그것에 비슷하였으나 칼슘과 인은 높은 수준이었다.

  • PDF

상온 양생한 초고성능 콘크리트(UHPC)의 경화 전과 후의 성능 관계 (Performance of Fresh and Hardened Ultra High Performance Concrete without Heat Treatment)

  • 강성훈;홍성걸
    • 콘크리트학회논문집
    • /
    • 제26권1호
    • /
    • pp.23-34
    • /
    • 2014
  • 초고성능 콘크리트(UHPC)를 현장에서 타설 하기 위해서는 타설 장비, 배근 상태, 타설 환경 등 현장 조건을 고려한 유동성 조절이 필요하다. 구성 재료와 배합비가 최적화된 UHPC 제품에서 유동성 조절을 위해 현실적으로 변경 가능한 방법은 물-결합재 비(W/B) 또는 고성능 감수제 혼입률(SP/C)을 조절하는 것이며, 경제적 이유로 강섬유 혼입률도 변경 할 수 있다. 일반 콘크리트와는 달리 UHPC는 아주 작은 재료와 배합비 변화에도 굳기 전 또는 굳은 성능에 많은 차이를 나타낸다. 따라서 이 연구에서는 이러한 요인들이 UHPC의 슬럼프 플로와 공기량에 미치는 영향, 그리고 인장 및 압축 성능에 미치는 영향을 알아보았으며, 슬럼프 플로와 공기량과의 선형적인 상관관계를 이용하여 이러한 성능들을 예측할 수 있는 식을 유도 하였다. UHPC의 특성 중 하나인 자기 충전성을 만족하는 조건에서 압축강도에 관한 최적 W/B와 SP/C는 각각 16.8%와 3%로 결정 되었으며, 이러한 조건에서 측정된 공기량은 3.2~4.2%로 이 범위에서의 공기량은 압축강도에 영향을 미치지 못하는 것으로 나타났다. 휨 인장강도에 있어 W/B와 SP/C는 무시할 만큼 작은 영향을 미쳤으며, 상온 양생한 UHPC의 경우 섬유 혼입률이 휨 인장성능을 지배 하는 것으로 평가 되었다. 다만, 체적비로 1%의 강섬유가 혼입된 시편의 경우 섬유가 혼입되지 않은 시편과 달리 균열 후 연성적인 거동은 보였으나, 강도 증진에는 효과가 없는 것으로 나타났다. 반면, 체적비 2%의 강섬유가 혼입된 시편은 강도와 연성을 크게 증가시켰다.