• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.463-466
• /
• 1999

Ductility is an important consideration in the design of reinforced high-strength concrete. Therefore, this research investigate the ductile behavior of rectangular high-strength concrete columns like as bridge piers with confinement steel. The effect on the ductility of axial load, lateral reinforcement ratio, longitudinal reinforcement ratio, shear ratio, and compressive strength of concrete were investigated analytically using layered section analysis. As the results, it was proposed the proper relationship between ductility and variables and formulated into equations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.223-228
• /
• 1994

The strength development of polymer concrete using an unsaturated polyester polymer varies depending on many factors. However, the strength development is mostly dependent upon the age and curing temperature if the mixture ratios are the same. This study conducted to experimentally describe the relationship between the strength development and maturity which is defined as a function of $\Sigma$(time $\times$ temperature). The research result may be applied to predict the compressive, tensile and splitting strengths of the polymer concrete by computing the maturinty of the concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.787-790
• /
• 2000

This paper presents an experimental study on flexural behavior of structural member enlarged with epoxy mortar system. The main test variable is flexural tensile strength. A series of 4 test beams was tested to shoe the corresponding effect of each variables on maximum load capacity, load-deflection and moment-curvature relationship, interface behavior and failure mode. The results show that the flexural tensile strength of retrofitted materials have no relation load-deflection, but to load-strain, and failure mode.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.58-59
• /
• 2013

In this study, the standard specimen heated to curing experiments and simulation experiments the absence of porosity distribution and the effect on the compressive strength has been investigated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.43-48
• /
• 2001

The use of fly ash in cement and concrete industries has many benefits including engineering, economic, and ecological aspects. However, it has a disadvantage of low strength development, especially at early ages. In this study, in order to overcome this problem, the early strength accelerating agent($NA_{2}$ $SO_{4}$) was selected and applied to the production of high strength concrete(HSC) containing fly ash. It was found that the compressive strength of fly ash concrete incorporating TEX>$NA_{2}$ $SO_{4}$ has greater than that of concrete containing fly ash only until 7 days after casting. From the microstructural point of view, ettringite increased and pores decreased in fly ash concrete incorporating TEX>$NA_{2}$ $SO_{4}$ , leading to the development of early age strength. It was also found that the velocity vs. strength relationship of HSC is considerably different from that of low-strength concrete(LSC). Therefore, in order to predict early age strength of HSC, a estimation equation different from that for LSC is needed.

• 콘크리트학회논문집
• /
• 제12권2호
• /
• pp.79-87
• /
• 2000

The strength development of concrete is influenced by temperature and cement type which greatly affect hydration degree of cement. There is not pertinent concrete strength management methods for estimating the in-place strength of concrete. One such method is the maturity concept. The maturity concept is based on the fact that concrete gains strength with time as a result of the cement hydration and, thus the rate of hydration, as in any chemical reaction, depends primarily on the concrete temperature during hydration. Thus, the strength of concrete is function of its time-temperature history. This goals of the present study are to investigate a relationship between strength of high-fluidity concrete and maturity that is expressed as a function of an integral of the curing period and temperature, predict strength of concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.204-207
• /
• 2004

In this paper, mechanical properties of the high strength lightweight self-compacting concrete with simple mixed design method was investigated. Experimental tests were performed as such compressive strength, splitting tensile strength, modulus of elasticity and density of high strength lightweight self-compacting concrete. The 28 days compressive strength of high strength lightweight self-compacting concrete with the LC replacement ratio of $100\%$ reduces about $31\%$ but LF replacement ratio of $100\%$ increase about $20\%$ compared that of the control concrete. The structural efficiency of high strength lightweight self-compacting concrete increase with proportional to the replacement into of LF. The relationship between the splitting tensile strength and 28 days compressive strength can be represented by the equation $f_s=0.076f_{ck}+0.5582$. The modulus of elasticity was found to be lower than that of normal weight concrete, ranging form 24 to 33 GPa.

• 폴리머
• /
• 제38권6호
• /
• pp.820-826
• /
• 2014

본 연구에서는 styrene(St)와 butyl acrylate(BA)를 단량체로 폴리머를 합성하여 폴리머 필름의 인장강도를 측정하고 폴리머 시멘트 모르타르로 제작하여 세공구조와 부착강도, 그리고 인장강도와의 상호 연관성을 파악하고자 하였다. 본 연구결과 St/BA 폴리머 필름의 인장강도는 St의 함유량이 높을수록 증가하는 것으로 나타났으며. 폴리머 시멘트 모르타르의 부착강도와 인장강도는 폴리머 필름의 인장강도가 클수록, 미세공극량이 많을수록 우수하게 나타나고 있다.

• The Journal of Korean Physical Therapy
• /
• 제27권6호
• /
• pp.386-391
• /
• 2015

Purpose: This study investigated whether the strength imbalance between two muscles can affect the score of EMG based biofeedback game, and whether the EMG based biofeedback game score can be used as predictable indicator of the degree of muscle balance alternating the conventional strength measuring equipment. Methods: 40 participated in this study. Biodex was used to measure the peak torque/weight in order to calculate the muscle strength balance index between plantar flexor and dorsiflexor of ankle joint. And muscle balance index (MBI) was calculated. The EMG biofeedback game scores of dorsiflexor and plantar flexor were acquired, so that the EMG electrodes were attached at tibialis anterior and gastrocnemius. The relationship between the game score and the muscle balance index were analyzed. Results: There was negative correlation between the muscle balance index between plantar flexor and dorsiflexor and the peak torque/weight of plantar flexor (r=-0.70). And there was negative correlation between the muscle balance index between plantar flexor and dorsiflexor and the game score of plantar flexor (r=-0.83). Conclusion: The EMG biofeedback game score had significant relationship with muscle imbalance at ankle joint, so it seems that the game score can be used for predicting the degree of muscle imbalance as a parameter.

• Earthquakes and Structures
• /
• 제15권2호
• /
• pp.145-153
• /
• 2018

Extensive reinforced concrete interior beam-column joints with beams of different depths have been used in large industrial buildings and tall building structures under the demand of craft or function. The seismic behavior of the joint, particularly the relationship between deformation and strength in the core region of these eccentric reinforced concrete beam-column joints, has rarely been investigated. This paper performed a theoretical study on the effects of geometric features on the shear strength of the reinforced concrete interior beam-column joints with beams of different depths, which was critical factor in seismic behavior. A new model was developed to analyze the relationship between the shear strength and deformation based on the Equivalent Strut Mechanism (ESM), which combined the truss model and the diagonal strut model. Additionally, this paper developed a simplified calculation method to estimate the shear strength of these type eccentric joints. The accuracy of the model was verified as the modifying analysis data fitted to the test results, which was a loading test of 6 eccentric joints conducted previously.