• Title/Summary/Keyword: Relationship Restoration

Search Result 331, Processing Time 0.023 seconds

Conservation Treatment and Production Technique of the Golden Crown (Treasure No. 339) Excavated from Seobongchong Tomb in Gyeongju (경주 서봉총 출토 금관(보물 339호)의 보존처리와 제작기법 연구)

  • Kwon, Yoonmi
    • Conservation Science in Museum
    • /
    • v.26
    • /
    • pp.83-182
    • /
    • 2021
  • This study summarized the results of the conservation treatment and investigation on the production method of the golden crown (Treasure No. 339) excavated from Tomb No. 129 (also known as Seobongchong Tomb) in Noseo-dong, Gyeongju-si, Gyeongsangbuk-do Province. The golden crown from Seobongchong Tomb was discovered during the excavations conducted by the Museum of the Government-General of Korea in 1926 during the Japanese colonial era. It is currently in the collection of the National Museum of Korea. A total of six Silla golden crowns have survived in Korea, among which the crown from Seobongchong Tomb is the only example with a dome-shaped hemispherical decoration attached with a bird ornament while otherwise showing the typical features of Silla crowns. The crown had been repaired following its excavation using metallic materials and adhesives, but due to the partial deformation and damage brought about by the repair materials, it required further conservation treatment. This article describes in detail the overall process of the conservation treatment and the restoration of the original form of the golden crown from Seobongchong Tomb, particularly the method of reinforcing the joints to secure the stability of the crown. It presents the characteristics of the crown's production as revealed in the investigation during the conservation treatment, and further analyzes the relationship of this crown from Seobongchong Tomb with other Silla crowns through a comparison of their production techniques. The investigation revealed that the crown was primarily decorated with golden sequins at the time of its production. At a later point some of the sequins in the upright ornament were replaced with comma-shaped jade beads and additional comma-shaped jade beads were added to the headband. In order to determine if such modifications to the decoration had occurred with other Silla crowns, the decoration of the six extant Silla golden crowns were investigated. The crown from Cheonmachong Tomb features traces of this same modification to the decoration and possesses other similarities with the crown from Seobongchong Tomb.

A case of oral rehabilitation with increasing vertical dimension for a patient with loss of posterior teeth support (구치부 지지 상실을 보이는 환자에서 수직고경 거상을 동반한 구강 회복 증례)

  • Kim, Hyun-Hwi;Lee, Jong-Hyuk;Ha, Seung-Ryong;Choi, Yu-Sung
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.60 no.4
    • /
    • pp.404-411
    • /
    • 2022
  • The patient in this case was an 80-year-old female who had lost #16, 13, 26, 37, 36, 35, 44, 45, 46, 47 teeth. The patient showed loss of posterior support, loss of vertical dimension of occlusion, and deep anterior overbite. Her chief complaint was esthetic and functional discomfort. She wanted to restore normal facial aesthetic shape and masticatory function through prosthetic treatment. Clinical evaluation, radiographic examinations, and facial and oral analysis were performed. Interocclusal rest space was excessive than the average. Distance between labial vestibules and zenith of central incisors, and lower facial ratio were below the average. Taken together, occlusal rehabilitation was determined through increasing 4 mm of vertical dimension on premolars. In this case, a patient who lacked restoration space with deep bite in the anterior region due to loss of the posterior teeth support restored a stable occlusal relationship and harmonious anterior and lateral guidance through fixed and removable prosthesis with increased vertical dimension.

A Comparative Study of Chinese and Western Film Colors (중국과 서양 영화의 색채 비교 연구)

  • Wu, Xiao-Hui
    • Journal of Korea Entertainment Industry Association
    • /
    • v.13 no.4
    • /
    • pp.131-138
    • /
    • 2019
  • The film enters the color film from black and white, and the screen image changes qualitatively. The color in the film not only has the reproduction function of the restoration object like the objective appearance, but also has the function of conveying different subjective emotions. It can express the color and can't express it. The artistic effect conveys the information content that the story itself can't convey, so the color of the film becomes an important part of the film language. The color in the film is presented on the screen in the form of single-screen color, scene color, full-color color tone, and various color chains designed according to different contradictions and conflicts. Because the film art and art means are assembled by montage, he colors in the picture also form a montage form. People call it "color montage". People's subjective nature of color criticism and acceptance of color language also depend on various local tones. The accurate expression of the relationship, the unique attribute of color determines that the color must enter the structural state in order to express its unique charm. The color of the film only has the real aesthetic value when it enters the level of "color structure". This paper studies the color of Chinese and Western films from the differences between the color thinking of Chinese and Western film directors and the cultural implication of Chinese and Western film colors. The western film director emphasizes the structure of color and pays attention to the use of tonal montage to convey the characters. Emotions reflect the characteristics of a subjective color. Beginning with the "fifth-generation" director of Chinese film, the new journey of film color language has been opened. In the process of blending love and scenery, the film style of "image-in-one" has been achieved.

Strategies for Managing Dementia Patients through Improving Oral Health and Occlusal Rehabilitation: A Review and Meta-analysis

  • Yeon-Hee Lee;Sung-Woo Lee;Hak Young Rhee;Min Kyu Sim;Su-Jin Jeong;Chang Won Won
    • Journal of Korean Dental Science
    • /
    • v.16 no.2
    • /
    • pp.128-148
    • /
    • 2023
  • Dementia is an umbrella term that describes the loss of thinking, memory, attention, logical reasoning, and other mental abilities to the extent that it interferes with the activities of daily living. More than 50 million individuals worldwide live with dementia, which is expected to increase to 131 million by 2050. Recent research has shown that poor oral health increases the risk of dementia, while oral health declines with cognitive decline. In this narrative review, the literature was based on the "hypothesis" that dementia and oral health have a close relationship, and appropriate oral health and occlusal rehabilitation treatment can improve the quality of life of patients with dementia and prevent progression. We conducted a literature search in PubMed and Google Scholar databases, using the search terms "dementia," "major neurocognitive disorder," "dentition," "occlusion," "tooth loss," "dental prosthesis," "dental implant," and "occlusal rehabilitation" in the title field over the past 30 years. A total of 131 studies that scientifically addressed dementia, oral health, and/or oral rehabilitation were included. In a meta-analysis, the random effect model demonstrated significant tooth loss increasing the dementia risk 3.64-fold (pooled odds ratio=3.64, 95% confidence interval [2.50~5.32], P-value=0.0348). Tooth loss can be an important indicator of cognitive function decline. As the number of missing teeth increases, the risk of dementia increases. Loss of teeth can lead to a decrease in the ascending information to the brain and reduced masticatory ability, cerebral blood flow, and psychological atrophy. Oral microbiome dysbiosis and migration of key bacterial species to the brain can also cause dementia. Additionally, inflammation in the oral cavity affects the inflammatory response of the brain and the complete body. Conversely, proper oral hygiene management, the placement of dental implants or prostheses to replace lost teeth, and the restoration of masticatory function can inhibit symptom progression in patients with dementia. Therefore, improving oral health can prevent dementia progression and improve the quality of life of patients.

Union Affiliation: Social Exclusion Risk and Prosocial Behavior (조합원 되기: 사회적 배제 위기와 친사회적 행동)

  • JunHyoung Jo;Hyung-Chul O. Li;ShinWoo Kim
    • Science of Emotion and Sensibility
    • /
    • v.27 no.2
    • /
    • pp.25-36
    • /
    • 2024
  • Past research reported mixed results on the effects of social exclusion on prosocial behavior. Whereas some studies reported an increase in prosocial motivation and behavior, others proposed that social exclusion causes a decrease in prosocial behavior along with negative reactions such as anger and aggression. These conflicting results may have arisen because prosocial behavior does not in itself always produce social reconnection. That is, although prosocial behavior is a major means of promoting social relationships, the excluded person does not need to act prosocially to benefit others unless the behavior leads to the restoration of the relationship. Unlike past research that assumed dichotomous situations of exclusion or belonging, the present research tested prosocial behavior in a social exclusion risk situation where the possibility of reconnection exists. In addition, we used the ability to potentially contribute to the group as another independent variable. We used a simulation game titled "Becoming a Union Member" to manipulate each participant's social exclusion risk and ability. Participants responded to a simple survey named member personality test and gave preliminary votes to one another, and exclusion risk was manipulated by the number of votes received. Later, ability was manipulated by disclosing perception test scores in the named member ability test. In both Experiments 1 and 2, participants who scored high in terms of social exclusion risk and low in the ability to potentially contribute showed prosocial behavior in stipulating larger donations. These results demonstrate that probable social reconnection defined by exclusion risk and ability is the key to explaining prosocial behavior following social exclusion.

Combined use of direct and indirect digital impression in temporary denture fabrication (직접 및 간접 디지털 인상을 병용한 임시 의치 제작 증례)

  • Ji-Su Park;Cheong-Hee Lee;Kyu-Bok Lee;Du-Hyeong Lee;Hyun-Ji Yu;So-Yeun Kim
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.40 no.3
    • /
    • pp.159-168
    • /
    • 2024
  • Through the use of intraoral scanners, it is possible to obtain intraoral scan impressions and produce prostheses. This approach is also being attempted not only in dentate patients but also in edentulous patients. However, obtaining scans of edentulous areas can be more challenging than scanning dental areas, and there may be limitations, especially in capturing the details of the mucosal tissues. On the other hand, when obtaining impressions with intraoral scanners, simultaneous recording of the occlusal relationship of the maxilla and mandible can reduce the number of patient visits and expedite the restoration process. In this case, we aimed to combine the advantages of direct intraoral scanning and indirect digital impressions obtained after traditional impression-taking by merging two types of scan files. Consequently, in patients with partially edentulous arches, we sought to provide effective interim prostheses through direct and indirect digital model impressions and report our findings accordingly.

Esthetic restoration of maxillary anterior teeth considering facial features in digital diagnostic wax-up: a case report (디지털 진단 왁스업을 통하여 안모를 고려한 상악 전치부 심미수복 증례)

  • Sung-Ji Gong;Sang-Won Park;Hyun-Pil Lim;Kwi-dug Yun;Chan Park;Woohyung Jang
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.40 no.3
    • /
    • pp.179-188
    • /
    • 2024
  • To enhance the predictability of aesthetic treatment outcomes in aesthetic prosthetic restorations, considerations must include analysis of facial features, the relationship between teeth and lips, proportions of tooth width/length, gingival form, and more. Traditional diagnostic wax-ups have limitations in considering the patient's facial features and are unable to facilitate rapid form modifications. With recent advancements in digital technology, it is now possible to digitize the patient's facial features in three dimensions, enabling the design of restorations that harmonize with facial features. These digital workflows not only improve efficiency but also provide patients with faster visualization of treatment outcomes, thereby enhancing motivation. Therefore, in this case, a treatment plan is devised to utilize digital diagnostic wax-ups considering the patient's facial features for the final prosthetic design.

A Study on the roof curved ratio and slope of Korean Traditional Wooden Building - Focused on the Central Hall of Buddhist Temple - (전통목조건축물 지붕곡과 기울기에 관한 연구 - 사찰의 주불전을 중심으로 -)

  • Go, Jung-Ju;Lee, Jeong-Soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.6
    • /
    • pp.3894-3906
    • /
    • 2014
  • The aim of this study was to classify the central Buddhist temple among the state-designated cultural assets, which were measured precisely, into the gable roof buildings and the gambrel roof buildings to analyze the Ang-Goak, Inside waist, ridge ratio, and roof inclination represented on the roof, and prepare basic objective material for the restoration and repair of cultural assets. As a result, as for the relationship between the roof curve and the inclination of the gable roof building and gambrel roof building, the following conclusions could be drawn. First, the Ang-Goak and Inside waist of the gable roof building had a close correlation with the building size, and the internal high pillar existence. In addition, the Ang-Goak and Inside waist were shown in the 7-ryangga structure, which is greater in size than in the 5-ryangga structure. This was found to be related to the building size. Second, the Ang-Goak and Inside waist of the gable roof building has a correlation with each other, and it was found that Inside waist also was large in the building with a larger Ang-Goak. The roof inclination rarely had a connection with variable factors (plane factor, elevation factor, and cross section factor). The sizes of Ang-Goak, Inside waist, and ridge ratio were similar in the outside 1 chulmok and outside 2 chulmok of gongpo but those sizes were relatively larger in outside 3 chulmok. Third, the Ang-Goak and Inside waist of the gambrel roof building moved independently for each building without a correlation with each other, unlike the case of the gable roof building. The front and the side showed a correlation with each other, and in the building with the large curve of the front side, the curve was also large in the sides. Fourth, in the case of the building with a high pillar inside the gambrel roof building, the Ang-Goak and Inside waist were larger. On the other hand, they were smaller in the case of a building without a high pillar. This was found to have a close relationship with the building size. In addition, the ridge ratio has a close connection with the building size and building height. Therefore, the ridge ratio is larger in a high building or large sized building. The roof inclination rarely has a correlation with variable factors, as in the case of the gable roof building.

CONFOCAL LASER SCANNING MICROSCOPIC MORPHOLOGY OF DENTIN-RESIN INTERFACE AND ITS RELATIONSHIP WITH SHEAR BOND STRENGTH (상아질-레진 계면의 공초점 현미경적 형태 및 전단결합강도와의 관계)

  • Choi, Nak-Won;Cho, Byeong-Hoon;Son, Ho-Hyun
    • Restorative Dentistry and Endodontics
    • /
    • v.24 no.2
    • /
    • pp.310-321
    • /
    • 1999
  • In this in vitro study, confocal laser scanning microscopic morphology of dentin-resin interface and its relationship to shear bond strength were investigated after the exposed dentin surfaces were treated with 3 different kinds of dentin adhesive systems[three-step; Scotchbond Multi-Purpose Plus(SMPP), self-priming bonding resin; Single Bond(SB), self-etching primer; Clearfil Liner Bond 2(LB2)]. 52 extracted human molar teeth without caries and/or restorations. The experimental teeth were randomly divided into three groups of seventeen teeth each. In five teeth of each group, class V cavities(depth: 1.5mm) with 900 cavosurface angles were prepared at the cementoenamel junction on buccal and lingual surfaces. Bonding resins of each dentin adhesive system were mixed with rhodamine B. Primer of SMPP was mixed with fluorescein. In group 1. the exposed dentin was conditioned with etchant, applied with above primer and bonding resin of SMPP. In group 2, with etchant and self-priming bonding agent of SB. In group 3, with self-etching primer and bonding agent of LB2. After treatment with dentin adhesive systems, composite resin were applied and photocured. The experimental teeth were cut longitudinally through the center line of restoration and grounded so that about $90{\mu}m$-thick wafers of buccolingually orientated dentin were obtained. And, $70{\sim}80{\mu}m$-thick wafers sectioned horizontally, thus presenting a dentinal tubules at 900 to the cut surface of a remaining tooth, were obtained. Primer of SMPP mixed with rhodamine B was applied to these wafers. Confocal laser scanning microscopic investigations of these wafers were done within of 24 hours after treatment. To measure shear bond strength, the remaining twelve teeth of each group were grounded horizontally below the dentinoenamel junction, so that no enamel remained. After applying dentin adhesive systems on the dentin surface, composite was applied in the shape of cylinder. The cylinder was 5mm in diameter, and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. It was concluded as follows ; 1. Hybrid layer of SMPP(mean: $4.56{\mu}m$) was thicker than that of any other groups. This value was not statistically significant thicker than that of SB(mean: $3.41{\mu}m$, p>0.05), and significant thicker than that of LB2(mean: $1.56{\mu}m$, p<0.05). There was a statistical difference between SB and LB2(p<0.05). 2. Although there were variations in the length of resin tag even in a sample, and in a group, most samples in SMPP and SB showed resin tags extending above $20{\mu}m$. But samples in LB2 showed resin tags of $10{\mu}m$ at best. 3. Besides primer's infiltration into demineralized peritubular dentin and dentinal tubules, fluorophore of primer was detected in the lateral branches of dentinal tubules. 4. All groups demonstrated statistically significant differences from one another(p<0.05), with shear bond strengths given in descending order as follows: SMPP(18.3MPa), SB(16.0MPa) and LB2(12.4MPa). 5. LB2 having thinnest hybrid layer($1.56{\mu}m$) showed the lowest shear bond strength(12.4MPa).

  • PDF

Label Embedding for Improving Classification Accuracy UsingAutoEncoderwithSkip-Connections (다중 레이블 분류의 정확도 향상을 위한 스킵 연결 오토인코더 기반 레이블 임베딩 방법론)

  • Kim, Museong;Kim, Namgyu
    • Journal of Intelligence and Information Systems
    • /
    • v.27 no.3
    • /
    • pp.175-197
    • /
    • 2021
  • Recently, with the development of deep learning technology, research on unstructured data analysis is being actively conducted, and it is showing remarkable results in various fields such as classification, summary, and generation. Among various text analysis fields, text classification is the most widely used technology in academia and industry. Text classification includes binary class classification with one label among two classes, multi-class classification with one label among several classes, and multi-label classification with multiple labels among several classes. In particular, multi-label classification requires a different training method from binary class classification and multi-class classification because of the characteristic of having multiple labels. In addition, since the number of labels to be predicted increases as the number of labels and classes increases, there is a limitation in that performance improvement is difficult due to an increase in prediction difficulty. To overcome these limitations, (i) compressing the initially given high-dimensional label space into a low-dimensional latent label space, (ii) after performing training to predict the compressed label, (iii) restoring the predicted label to the high-dimensional original label space, research on label embedding is being actively conducted. Typical label embedding techniques include Principal Label Space Transformation (PLST), Multi-Label Classification via Boolean Matrix Decomposition (MLC-BMaD), and Bayesian Multi-Label Compressed Sensing (BML-CS). However, since these techniques consider only the linear relationship between labels or compress the labels by random transformation, it is difficult to understand the non-linear relationship between labels, so there is a limitation in that it is not possible to create a latent label space sufficiently containing the information of the original label. Recently, there have been increasing attempts to improve performance by applying deep learning technology to label embedding. Label embedding using an autoencoder, a deep learning model that is effective for data compression and restoration, is representative. However, the traditional autoencoder-based label embedding has a limitation in that a large amount of information loss occurs when compressing a high-dimensional label space having a myriad of classes into a low-dimensional latent label space. This can be found in the gradient loss problem that occurs in the backpropagation process of learning. To solve this problem, skip connection was devised, and by adding the input of the layer to the output to prevent gradient loss during backpropagation, efficient learning is possible even when the layer is deep. Skip connection is mainly used for image feature extraction in convolutional neural networks, but studies using skip connection in autoencoder or label embedding process are still lacking. Therefore, in this study, we propose an autoencoder-based label embedding methodology in which skip connections are added to each of the encoder and decoder to form a low-dimensional latent label space that reflects the information of the high-dimensional label space well. In addition, the proposed methodology was applied to actual paper keywords to derive the high-dimensional keyword label space and the low-dimensional latent label space. Using this, we conducted an experiment to predict the compressed keyword vector existing in the latent label space from the paper abstract and to evaluate the multi-label classification by restoring the predicted keyword vector back to the original label space. As a result, the accuracy, precision, recall, and F1 score used as performance indicators showed far superior performance in multi-label classification based on the proposed methodology compared to traditional multi-label classification methods. This can be seen that the low-dimensional latent label space derived through the proposed methodology well reflected the information of the high-dimensional label space, which ultimately led to the improvement of the performance of the multi-label classification itself. In addition, the utility of the proposed methodology was identified by comparing the performance of the proposed methodology according to the domain characteristics and the number of dimensions of the latent label space.