• 대한간호학회지
• /
• 제32권4호
• /
• pp.506-518
• /
• 2002

This study was performed to measure the nursing service quality being used SERVQUAL model and satisfaction that the admitted patients perceived. Method: The questionnaire founded on the SERVQUAL was developed and distributed to 300 patients at the three general hospitals in three provincial city, Korea. For data analysis, Cronbach's α, frequencies, percentages, paired t-test, Pearson Correlation Coefficient were used. Result: In expectation, patients most highly perceived the assurance factor that was one among the 5 factors being constituted nursing service. In performance, patients most highly perceived the responsiveness factor. The performance degrees of the 5 factors and 20 attributes being constituted nursing service did not exceed the expectation degree of those. So the calculated figures for nursing service quality of the three subjected hospitals were all minus. In relation of the patients' demographics and nursing service characteristics to their general satisfaction, patients' sex, age, income and the all factors and attributes of nursing service had relation to their general satisfaction. Conclusion: It could be concluded that the nursing service quality of the three subjected hospitals was poor and the patients' demographic and nursing service characteristics had relation to their general satisfaction.

• 한국간호교육학회지
• /
• 제25권4호
• /
• pp.424-435
• /
• 2019

Purpose: The purpose of this study was to investigate the relationship among nursing organizational culture, work performance, and workplace bullying of nurses, and to identify the factors that affect workplace bullying. Methods: The design of this study was descriptive research, and the data were collected from October 26 to November 5, 2018. The research participants were 210 nurses in six general hospitals in G province. The data were analyzed by descriptive statistics, a t-test, one-way ANOVA, Scheff? post-hoc test, Pearson's correlation coefficient, and a stepwise multiple regression using SPSS 22.0. Results: The workplace bullying type showed negative correlations with innovation-oriented culture, relation-oriented culture, and work performance. The workplace bullying consequence showed negative correlations with the innovation-oriented culture, relation-oriented culture, and work performance, and showed positive correlations with the workplace bullying type. The factors influencing the results of the workplace bullying consequence were workplace bullying type followed by relation-oriented culture, and unmarried status. Conclusion: Workplace bullying among nurses was related to the nursing organizational culture and work performance. Therefore, in order to reduce the turnover rate of nurses and to help them adapt well to the nursing organizational culture, a bullying prevention and intervention program is necessary.

• 생명과학회지
• /
• 제17권4호
• /
• pp.510-514
• /
• 2007

정조의 저장조건에 따른 이화학적 특성의 변화에 대한 상관성을 분석한 결과는 다음과 같다. 식미관련 특성들의 상관관계에서 상온저장은 식미치와 강하점도, 취반점도와 단백질 함량 간이 유의한 정의 상관관계를 보였고, 치반점도와 강하점도, 강하점도와 단백질 함량간은 유의한 부의 상관관계를 나타내었다. 저온저장에서는 식미치와 아밀로스 함량, 호화개시온도와 단백질함량간이 유의한 정의 상관을 보였고, 식미치와 백도, 식미치와 호화개시온도, 식미치와 단백질함량 간은 유의한 부의 상관관계를 나타내었다. 식미관련 특성들이 식미치에 미치는 경로계수는 상온저장에서 직접적인 정의 효과로는 아밀로스 함량이 가장 높았으며 직접적인 부의 효과로는 단백질 함량이 가장 높았으며 다음으로 Mg/K비로 나타났다. 간접적 정의 효과로는 강하점도와 단백질 함량이 가장 높았으며 단백질 함량과 강하점도, 단백질 함량과 Mg/K비의 순이었고 간접적 부의 효과로는 호화개시온도와 Mg/K비로 가장 높았으며 백도와 Mg/K비의 순이었다. 저온저장에서 직접적인 정의 효과로는 백도가 가장 높았으며 단백질함량의 순이었고, 직접적 부의 효과로는 호화개시온도가 가장 높았으며 아밀로스 함량의 순이었다. 간접적인 정의 효과로는 호화개시온도와 아밀로스 함량이 가장 높았으며 호화개시온도와 강하점도의 순이었고 간접적인 부의 효과는 백도와 호화개시온도로 나타났으며 호화개시온도와 단백질함량의 순이었다. 식미관련특성들의 식미치에 대한 중회귀분석은 상온저장에서 단백질 함량, Mg/K비, 아밀로스 함량, 호화개시온도의 5개 요인에서 0.823의 결정계수로 가장 높게 나타났고, 저온저장에서는 수분함량, 아밀로스함량, 호화개시온도, 치반점도의 5개 요인에서 0.712의 결정계수로 가장 높게 나타났다. 24.16 kcal/mol의 값을 나타내었다.로 감소되었다(35.2% vs. 77.4%; p<0.01). 실험 2에서 다양한 정자 농도에 의한 정자 침투율과 정상 수정률을 바탕으로 판단했을 때 $4.6{\times}10^6/ml$의 정자 농도가 다른 정자 농도에 비해 난구 세포부착 난자의 체외 수정에 적합한 것으로 나타났다. 체외 수정과정에서 난구 세포 부착된 상태로 수정된 난자는 나화 난자에 비해 유의적으로(p<0.05) 높은 분할률(48.8% vs. 58.9%), 배반포 형성률(11.0% vs. 22.8%)과 배반포 세포수$(22{\pm}2\;vs.\;29{\pm}2)$를 나타내었다. 본 연구의 결과로부터 돼지의 체외 수정과정에서 난구 세포의 존재는 정자 침투를 저해하지만 분할률, 배반포 형성률 및 배반포의 세포수를 증가시키는 것으로 사료된다.수의 유출입 지점에 온도센서를 부착하여 냉각수의 온도를 측정하고 냉각수의 공급량과 대기의 온도 등을 측정하여 대사열의 발생을 추정할 수 있었다. 동시에 이를 이용하여 유가배양시 기질을 공급하는 공정변수로 사용하였다 [8]. 생물학적인 폐수처리장치인 활성 슬러지법에서 미생물의 활성을 측정하는 방법은 아직 그다지 개발되어있지 않다. 본 연구에서는 슬러지의 주 구성원이 미생물인 점에 착안하여 침전시 슬러지층과 상등액의 온도차를 측정하여 대사열량의 발생량을 측정하고 슬러지의 활성을 측정할 수 있는 방법을 개발하였다.enin과 Rhaponticin의 작용(作用)에 의(依)한 것이며, 이는 한의학(韓醫學) 방제(方劑) 원리(原理)인 군신좌사(君臣佐使) 이론(理論)에서 군약(君藥)이 주증(主症)에 주(主)로 작용(作用)하는 약물(藥物)이라는 것을 밝혀주는 것이라고

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.101-108
• /
• 2004

Recently, a semi-active shock absorber has been taking interest because of its low cost and simple structure than the active one. CFD analysis has been conducted to investigate the continuous and variable damping characteristics of the semi-active shock absorber. Also, the flow resistance characteristics of a spool valve has been examined to identify individual parameters(namely, exponent and discharge coefficient) of pressure-flow rate relation needed for the accurate valve modeling. The flow field in the damping valve was simulated using the commercial code, CFX-5.3. The numerical results showed reasonable agreement with the experimental outputs. The pressure distribution with the variation of spool opening length and volume flow rate were discussed in detail. And the continuous and variable damping performance was found clearly. The individual parameters of spool valve were obtained as a function of orifice area. The exponent and discharge coefficient were fitted in with the first and the third polynomial respectively.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.179-193
• /
• 2000

Aluminium titanate (Al₂TiO5) with an excellent thermal shock resistant and a low the expansion coefficient was obtained by solid solution with MgO, SiO₂, and ZrO₂ in the Al₂TiO5 lattice or in the grain boundary solution through electrofusion in an arc furnace. However, these materials have low mechanical strength due to the presence of microcracks developed by a large difference in thermal expansion coefficients along crystallographic axes. Pure Al₂TiO5 tends to decompose into α-Al₂O₃ and TiO₂-rutile in the temperature range of 750-1300℃ that rendered it apparently useless for industrial applications. Several thermal shock tests were performed: Long therm thermal annealing test at 1100℃ for 100h; and water quenching from 950 to room temperature (RT). Cyclic thermal expansion coefficients up to 1500℃ before and after decomposition tests was also measured using a dilatometer, changes in the microstructure, thermal expansion coefficients, Young's modulus and strengths were determined. The role of microcracks in relation to thermal shock resistance and thermal expansion coefficient is discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.265-270
• /
• 2001

This study presents a feedback control methodology for suppression of the vortex shedding from a circular cylinder in a uniform flow. A rotational oscillation is applied as a controlled forcing and the lift coefficient ($C_L$) is used as a feedback signal. A feedback control concept is made based on the phase relation between the rotation velocity and $C_L$ at 'lock-on', The phase between the forcing and the vortex formation is changed $180^{\circ}$ from the phase of enhancing the lock-on state. This concept is examined by solving the Van del Pol equation. The results are satisfactory.

• 자원환경지질
• /
• 제27권1호
• /
• pp.81-91
• /
• 1994

There has been considerable research dealing with the influence of surface roughness along surfaces of rock discontinuities in relation to the peak shear strength of rock masses. Concepts accepted recently for measuring such strength include estimation of a roughness coefficient such as developed by Barton's studies. The method for estimation the Joint Roughness Coefficient (JRC) value of a measured roughness profile is subjective. The aim of this research is to estimate the JRC value of the roughness of a surface profile in a rock mass system using an objective method. The study of roughness of surfaces has included measurement of fractal geometric characteristics. Once the irregularity of the surface has been described by the fractal dimension, the spatial variation of the surface irregularities can be described using variogram and drift analysis. An empirical relationships between the roughness profiles of selected JRC ranges and their fractal dimension with variogram and drift were derived. The application of analyses of fractal dimension, variogram and drift was novel for the analysis of roughness profiles. Also, an empirical equation was applied to experimental data.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1990년도 제12회 학술강연회초록집
• /
• pp.58-62
• /
• 1990

The size and concentration of wear debris in lubricating oil often reveal the operating condition of the rotating machinery. To evaluate the possible application of light attenuation measurement for the estimation of wear debris concentration in the lubricating oil, the light transmittance through the lubricating oil cell contaminated with various concentrations of diatomite particles was measured, the attenuation coefficient was estimated from the transmittance measurement and the coefficients were compared with those obtained from the scattering theory. The comparision showed good agreements between them. It is also noted that the experimentally determined attenuation coefficient showed almost linear relation with particle weight concentrations for the concentrations within the range of 2000 ppm. For the case of 0 ppm weight concentration of diatomite particles in the lubricating oil cell, the thickness of the cell required to give $100 \mu W$ light attenuation is 7.75 mm. This result indicates that the light attenuation method will be one of the possible candidates of machine failure diagnostic sensors for the estimation of wear debris concentration in the lubricating oil.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.349-352
• /
• 2009

In this study, the relation between the performance degradation of SOFC single cell and the increase of polarization resistance for the cathode is investigated. $Pr_{0.3}Sr_{0.7}Co_{0.3}Fe_{0.7}O_3$(PSCF3737, $19.4{\times}10^{-6}K^{-1}$) and $Gd_{0.1}Ce_{0.9}O_2$ (CGO91, $12{\times}10^{-6}K^{-1}$) are used as a cathode and an electrolyte, respectively. The polarization resistance of cathode is increased due to the delamination caused by thermal expansion coefficient difference. The voltage drop with 10%/1000h decline rate occurs during long-term, when the interface between the cathode and the electrolyte is delaminated due to TEC difference.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.74-80
• /
• 1998

The morphologies of the wear particles are directly indicative of wear process occuring in the machine. The analysis of wear particle morphology can therefore provide very early detection of a fault and can also ofen facilitate a dignosis. For this work, the neural network was applied to identify friction coefficient through four shape parameters (50% volumetric diameter, aspect, roundness and reflectivity) of wear debris generated from the machine. The averages of these parameters were used as inputs to the network. It is shown that collect identification of friction coefficient depends on the ranges of these shape parameters learned. The various kinds of the wear debris had a different pattern characteristics and recognized relation between the friction condition and materials very well by neural network. We discuss how the network determines difference in wear debris feature, and this approach can be applied for machine condition monitoring and fault diagnosis.