• Computers and Concrete
• /
• 제4권2호
• /
• pp.135-156
• /
• 2007

Three 3D nonlinear finite-element models are developed to study the behavior of concrete beams and plates with and without external reinforcement by fibre-reinforced plastic (FRP). All three models are formulated based upon the 3D theory of elasticity. The stress model is modified from the element developed by Ramtekkar, et al. (2002) to incorporate material nonlinearity in the formulation. Both transverse stress and displacement components are used as nodal degrees-of-freedom to ensure the continuity of both stress and displacement components between the elements. The displacement model uses only displacement components as nodal degrees-of-freedom. The transition model has both stress and displacement components as nodal degrees-of-freedom on one surface, and only displacement components as nodal degrees-of-freedom on the opposite surface. The transition model serves as a connector between the stress and the displacement models. The developed models are validated by comparing the results of the analyses with an existing experimental result. Parametric studies of the effects of the externally reinforced FRP on the load capacity of reinforced concrete (RC) beams and concrete plates are performed to demonstrate the practicality and the efficiency of the proposed models.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.257-258
• /
• 2006

The $I_c$ degradation behaviors of externally-reinforced Bi-2223 superconducting tapes under pressurized liquid nitrogen were investigated. Tapes with different thickness of reinforcement layers were compared and the results showed that when the bending strain was calculated at the outer surface, the tape with the thicker reinforcement showed a better bending strain tolerance of $I_c$, but when the bending strain was calculated at the outermost filament, the $I_c$ degradation behavior became identical for all tapes. $I_{c0}$ decreased with the increase of applied pressure. After depressurization to atmospheric pressure from 1 MPa, the $I_c$ was completely recovered to its initial values. Ballooning occurred after a thermal cycle.

• Structural Monitoring and Maintenance
• /
• 제9권3호
• /
• pp.271-287
• /
• 2022

This study investigates the bending behavior of a composite concrete slab roof with different methods of externally strengthing using steel plates and carbon fiber reinforced polymer (CFRP) strips. First, the concrete slab model which was reinforced with CFRP strips on the bottom surface of it is validated using experimental data, and then, using numerical modeling, 7 different models of square-shaped composite slab roofs are developed in ABAQUS software using the finite element modeling. Developed models include steel rebar reinforced concrete slab with variable thickness of CFRP and steel plates. Considering the control sample which has no external reinforcement, a set of 8 different reinforcement states has been investigated. Each of these 8 states is examined with 6 different uncertainties in terms of the properties of the materials in the construction of concrete slabs, which make 48 numerical models. In all models loading process is continued until complete failure occurs. The results from numerical investigations showed using the steel plates as an executive method for strengthening, the bending capacity of reinforced concrete slabs is increased in the ultimate bearing capacity of the slab by about 1.69 to 2.48 times. Also using CFRP strips, the increases in ultimate bearing capacity of the slab were about 1.61 to 2.36 times in different models with different material uncertainties.

• 지질공학
• /
• 제27권1호
• /
• pp.41-49
• /
• 2017

본 연구는 수치해석을 통해 구근체, 보강재 변화와 지반 조건 변화에 따른 지반 내 영향범위를 확인하고자 하였다. 구근체의 증가에 따른 보강효과 증가 폭을 확인하고 지반조건 변화에 따른 경향을 파악하게 되면 쏘일네일링의 보강재 및 구근체를 결정할 수 있게 되어, 경제적인 시공이 되도록 기초자료로 활용할 수 있을 것으로 판단된다. 본 논문에서는 범용 수치해석 프로그램인 MIDAS GTS NX를 활용하여 보강재 위치 별 하중에 따른 변위를 분석 하였다. 또한 쏘일네일의 인발하중에 따른 사질토, 화강풍화토 지반에서 보강재의 구근체 이완영역이 지반 내 어떠한 특성을 나타내는지 비교 분석 하여 구근체 크기와 보강재의 직경 별 경제성을 확보할 수 있는 기준을 선정하기 위한 수치해석을 수행하였다.

• 한국공간구조학회논문집
• /
• 제5권4호
• /
• pp.71-77
• /
• 2005

보강방법으로 많이 사용되고 있는 CFRP Plate 접착 공법은 보강된 부재의 내력 증가에 아주 효과적이나 에폭시를 이용하여 표면 부착하는 특성상 충분한 성능을 발휘하지 못하고 보강 판의 탈락으로 파괴에 이르는 조기파괴(premature failure)의 파괴 특성을 보인다. 이러한 보강 실험체의 파괴 특성은 철근비, 콘크리트 강도, 보강재 종류, 보강길이, 접착제인 에폭시의 물성 등의 변수들에 의해 영향을 받는다. 본 연구에서는 CFRP Plate로 휨 보강된 RC 보의 구조적 거동 및 보강재 조기 탈락에 대한 보완으로 보강 CFRP-Rod를 이용한 표면매립공법의 휨 성능효과를 보기 위하여 수행된 실험결과를 비교 고찰한다. CFRP Plate 외부부착 공법을 적용한 RC 보강보의 주요 변수로는 보강재 길이, 보강위치(보의 인장면 및 측면), 단부 보강철물 유무 등의 실험변수로, CFRP-Rod는 보강재 길이를 변수로 하여 실험을 수행하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.35-43
• /
• 2017

철근콘크리트 휨부재의 최소철근비는 부재의 취성 파괴를 방지하기 중요한 설계 인자이다. 콘크리트구조기준과 도로교설계기준에서 사용되는 최소철근비는 단면의 유효 깊이 및 모멘트 팔길이에 대한 가정을 통해 산정되었다. 따라서 이 연구에서는 재료 모델과 힘의 평형 관계를 통해 합리적으로 최소철근비를 산정할 수 있는 방법을 제안하였다. 연구 결과 도로교설계기준의 포물-사각형 곡선을 통해 산정된 최소 철근비는 현재 설계 기준에 의한 최소철근비의 약 52~80% 수준으로 산정되어 경제적인 설계가 가능한 것으로 나타났다. 또한, 재료 모델을 통한 최소철근량이 배치된 부재의 연성 능력은 현재 설계 기준에 의한 값의 약 89% 수준으로 평가되었으나, 부재의 연성도는 7 이상으로 충분한 연성능력을 보였다. 따라서 제안된 포물-사각형 곡선을 통한 최소철근비는 휨부재 설계의 이론적 합리성 뿐만 아니라 안전성 및 경제성을 확보할 수 있는 것으로 나타났다.

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.1-6
• /
• 2022

As environmental regulations are strengthened, automobile manufacturers continuously research lightweight structures based on carbon fiber reinforced plastic (CFRP). However, it is difficult to see the effect of strength reinforcement when using a single CFRP material. To improve this, a hybrid laminate in which CFRP is mixed with the existing body structural steel was proposed. In this paper, CFRP patch reinforcement is applied to each compression/tensile action surface of a 22MnB5 metal sheet, and it was evaluated through a 3-point bending experiment. Progressive failure was observed in similar deflection on bending deformation to each one-sided reinforced specimen. After progressive failure, the tensile reinforced specimen was confirmed to separate the damaged CFRP patch and 22MnB5 sheet from the center of the flexure. The compression reinforced specimen didn't separate that CFRP patch and 22MnB5, and the strength reinforcement behavior was confirmed. In the compression reinforced specimen, damaged CFRP patches were observed at the center of flexure during bending deformation. As a result of checking the specimen of the compression reinforcement specimen with an optical microscope, It is confirmed that the damaged CFRP patch and the reinforced CFRP patch overlapped, resulting in a concentrated load. Through the experimental results, the 22MnB5 strength reinforcement characteristics according to the reinforcement position of the CFRP patch were confirmed.

• Computers and Concrete
• /
• 제12권6호
• /
• pp.831-850
• /
• 2013

The high strength materials have been more widely used in reinforced concrete structures because of the benefits of the mechanical and durable properties. Generally, it is known that the ductility decreases with an increase in the strength of the materials. In the design of a reinforced concrete beam, both the flexural strength and ductility need to be considered. Especially, when a reinforced concrete structure may be subjected an earthquake, the members need to have a sufficient ductility. So, each design code has specified to provide a consistent level of minimum flexural ductility in seismic design of concrete structures. Therefore, it is necessary to assess accurately the ductility of the beam sections with high strength materials in order to ensure the ductility requirement in design. In this study, the effects of concrete strength, yield strength of reinforcement steel and amount of reinforcement including compression reinforcement on the complete moment-curvature behavior and the curvature ductility factor of doubly reinforcement concrete beam sections have been evaluated and a newly prediction formula for curvature ductility factor of doubly RC beam sections has been developed considering the stress of compression reinforcement at ultimate state. Based on the numerical analysis results, the proposed predictions for the curvature ductility factor are verified by comparisons with other prediction formulas. The proposed formula offers fairly accurate and consistent predictions for curvature ductility factor of doubly reinforced concrete beam sections.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 토목섬유 특별세미나
• /
• pp.61-69
• /
• 2000

It is not easy to find a good soil condition due to the shortage of suitable land for construction work. The earth structure and buildings can be constructed over the soft soil. The soft soil must be treated either using the reinforcement element or dewatering. Most of land reclamation projects are being implemented along the south coast or west coast of the Korean Peninsula. The soils in these areas are covered with the soft marine clay, so soil and site improvement is the most important things to do. Pile foundation at the bottom of embankment can be constructed either in the soft ground or in the soil contaminated area. The purpose of this research is to develop "geogrid-reinforced piled embankment method" to prevent the differential settlement and increase the bearing capacity of soil. In this study, the effectiveness of the geogrid-reinforcement was studied by varying the space between piles and reinforcement conditions. Also, the geotechnical engineering properties of the embankment material and foundation soil were determined through the laboratory tests as well as the field tests. As a result, the site that the pile-spacing S = 3b with geogrid reinforcement is the most effective to reduce the differential settlement and increase load bearing capacity.

• 한국도로학회논문집
• /
• 제8권2호
• /
• pp.37-47
• /
• 2006

The structural response and performance of a flexible pavement can be improved through the use of geogrids as base course reinforcement. Current ongoing research at the University of illinois has focused on the development of a geogrid base reinforcement mechanistic model for the analysis of reinforced pavements. This model is based on the finite element methodology and considers not only the nonlinear stress-dependent pavement foundation but also the isotropic and anisotropic behavior of base/subbase aggregates for predicting pavement critical responses. An axisymmetric finite element model was developed to employ a three-noded axisymmetric membrane element for modeling geogrid reinforcement. The soil/aggregate-geogrid interface was modeled by the three-noded membrane element and the neighboring six-noded no thickness interface elements. To validate the developed mechanistic model, the commercial finite element program $ABAQUS^{TM}$ was used to generate pavement responses as analysis results for simple cases with similar linear elastic material input properties. More sophisticated cases were then analyzed using the mechanistic model considering the nonlinear and anisotropic modulus property inputs in the base/subbase granular layers. This paper will describe the details of the developed mechanistic model and the effectiveness of geogrid reinforcement when used in different quality unbound aggregate base/subbase layers.