• 대한기계학회논문집B
• /
• 제29권11호
• /
• pp.1257-1264
• /
• 2005

An inverse problem to determine two-dimensional total heat exchange factor is studied for the prediction of the slab temperature in the reheating furnace. Temperature measurements by the experiment are used in the inverse analysis. This inverse analysis employs the conjugate gradient method. The overall heat absorptances for 12-zones of the cross-section of the slab are estimated. The estimated temperatures at measurement locations are in good agreements with the measured temperatures.

• 한국가스학회지
• /
• 제23권4호
• /
• pp.74-79
• /
• 2019

상용급 재가열로 내부 소재 온도 측정을 위하여 특수 제작된 시험용 시편을 사용하고, 실시간 온도 예측을 위하여 선형화 된 열모델이 적용되었다. 적용된 로는 Walking Beam Type이고 소재의 형상은 폭 160mm, 높이 160mm, 길이 8100mm의 STS302 재질이며 온도 측정을 위해 폭, 높이와 길이 방향으로 총 6개의 열전대를 설치하였다. 로내의 분위기 온도는 섭씨 1265도까지 상승시켰으며 소재의 장입부터 토출까지 약 2.5시간이 소요되었다. 시험결과, 토출 시 소재의 온도는 섭씨 1256~1259도 범위에서 평균적으로 1257도 였으며, 열모델을 통한 예측된 평균 온도는 1251도로 나타났다. 따라서 해석과 시험결과의 편차는 6도 정도로서, 이는 산업계에서 요구되는 10도 이내의 범위에 있다.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.51-57
• /
• 2014

This paper presents an algorithmic type computing technique of process coefficient in predicting model of temperature for reheating furnace and also suggests a design method of neural network model to find an adequate value of process coefficient for arbitrary operating conditions including test conditons. The proposed neural network use furnace temperature, line speed and slab information as input variables, and process coefficient is output variable. Reasonable process coefficients can be obtained by an algorithmic procedure proposed in this paper using process data gathered at test conditons. Also, neural network model output equal process coefficient under same input conditions. This means that adquate process coefficients can be found by only computing neural network model without additive test even if operating conditions vary.

• 소성∙가공
• /
• 제20권2호
• /
• pp.132-139
• /
• 2011

Three dimensional simulations were performed for the deformation of a slab in a roller hearth type slab reheating furnace. The main objective of this study was to examine the deformation pattern of the slab due to the shadow effect, i.e., the temperature difference between the upper and lower slab surfaces, in particular, the variations of displacement and effective stress in the vertical direction. A commercially available FE code, ANSYS Workbench $12.1^{TM}$, was used in a fully coupled thermo-elasticity analysis. Several cases with different slab surface temperatures were selected for the simulations. For the sake of simplicity, the temperature environment inside the furnace was assumed to be homogeneous for the upper and lower faces of the slab. Two cases of with different slab width were selected as model geometry. The deformation patterns were computed and explained in terms of periodicity and symmetry. The results indicated that the shadow effect leads to a significant displacement in the vertical direction and, thereby, is one of the main reasons for the separation of the slab and its supports. These simulations also predicted that the deformation is more severe along the transverse direction than along the longitudinal direction.

• 대한기계학회논문집B
• /
• 제27권1호
• /
• pp.61-68
• /
• 2003

This study deals with the use of the conjugate gradient method for the simultaneous estimation of two unknown boundary heat fluxes on the slab in reheating furnace. Temperature measurements by the experiment are used in the inverse analysis. The heat flux estimations for three different cases of measurement locations in the slab are performed: non-skid, skid, and shift-skid zones. The estimated heat fluxes for three cases indicated the three regions having local peak values of heat fluxes. The estimated temperatures at measurement locations were in good agreements with the measured temperatures within 5% relative error.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.254-259
• /
• 2001

This study deals with the use of the conjugate gradient method for the simultaneous estimation of two unknown boundary heat fluxes on the slab in reheating furnace. Temperature measurements by the experiment are used in the inverse analysis. The heat flux estimations for three different cases of measurement locations in the slab are performed: non-skid, skid, and shift-skid zones. The estimated heat fluxes for three cases indicated the three regions having local peak values of heat fluxes. The estimated temperatures at measurement locations were in good agreements with the measured temperatures within 5% relative error.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.175-180
• /
• 2004

Improving furnace efficiency is a high priority need for aluminum, glass, steel and other metal casting industries. Oxy-fuel combustion is considered to be one of the most effective method to improve thermal efficiency and reduce $NO_x$, SOx and $CO_2$ emissions for high temperature furnaces. The characteristics of an oxy-fuel flame, in particular its shape, radiation profile and exhaust gas composition are considerably different to those of an air-fuel burner. For this reason, a new approach is needed regarding factors such as burner design, power input levels, number and positioning strategies of burners and also control philosophies. In this paper will discuss the latest developments of high performance oxy-fuel combustion reheating furnace system. This high performance oxy-fuel combustion system will be shown to be technologically superior to other types of combustion systems in the areas of fuel efficiency, emissions and productivity.

• 에너지공학
• /
• 제26권4호
• /
• pp.100-106
• /
• 2017

재가열로에서 분위기 온도에 따른 소재온도 변화를 예측하기 위해 SUS304, SS400 소재가 적용되었으며, 소재내부에 깊이 방향으로 열전대를 5개씩 설치한 후 분위기 온도를 1200도까지 상승시켰다. 그 결과 소재온도는 평균적으로 1150도 이상 도달했으며, 국부적으로 소재 표면과 내부는 10도 이상의 온도차를 나타내었다. 실험결과의 타당성 검증을 위해 열모델을 적용하여 수치해석 되었으며, 실험결과 대비 해석결과는 출구 평균온도 기준 15도 이내의 범위에서 오차를 나타내었다. 또한 오차는 SUS304 소재에 비해 비열 변화가 큰 SS400 소재에서 상대적으로 높게 나타났다. 결론적으로 재가열로에서 소재 온도는 분위기 온도 제어를 통해 달성할 수 있으며, 분위기 온도에 따른 소재 온도 변화는 출구에서 3% 오차범위 내에서 열모델을 사용하여 유추할 수 있음이 실험적으로 증명되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.175-180
• /
• 2003

An inverse problem to determine two-dimensional total heat exchange factor is studied for the prediction of the billet temperature in the reheating furnace. Temperature measurements by the experiment are used in the inverse analysis. This inverse analysis employs the conjugate gradient method. The total heat exchange factors for 12-zones of the cross-section of the billet are estimated. The estimated temperatures at measurement locations are in good agreements with the measured temperatures.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.229-234
• /
• 2006

The oxy-fuel combustion heating characteristics is investigated experimentally by measuring furnace and steel temperature variations for batch type furnace simulator with a specially designed low NOx oxy-fuel burner. Economics of using oxy-fuel combustion is confirmed and, the furnace and steel temperature variations for different heating conditions are compared to deduce optimal heating control pattern for energy savings and rapid uniform heating. High $CO_2$ concentration (> 80-90%), low NOx (< 40ppm) and CO (< 10ppm) are measured in the flue gas. Temperature differences (< $30^{circ}C$) inside the furnace and steel are reduced relatively by increasing the burner jet momentum.