• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.507-510
• /
• 1997

In this paper, we proposed force reflection method using joystick or controlling rehabilitation assisting mobile robot. We defined reflected orce equation as two terms. One is distance between mobile robot and obstacle, the other is speed of rehabilitation assisting robot. And we found the each gain value which guarantees stable navigation of robot. And we experimented simulation with simulation program supporting virtual 2-D map. Through the experiments, we confirmed force reflection algorithm is efficient when controlling rehabilitation assisting robot.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.599-605
• /
• 2011

A 3-D rehabilitation robot system is developed. The robot system is for the rehabilitation of upper extremities, especially the shoulder and elbow joints, and has 3-D workspace for occupational therapy to recover physical functions in activities of daily living(ADL). The rehabilitation robot system has 1 DOF in horizontal rotational motion and 2 DOF in vertical rotational motion, where all actuators are set on the ground. Parallelogram linkage mechanisms lower the equivalent inertia of the control elements as well as control forces. Also the mechanisms have high mechanical rigidity for the end effector and the handle. In this paper, a hybrid position/force controller is used for controlling positions and forces simultaneously The controller is tuned according to the robot posture. The active motion modes for rehabilitation program consist of active-resisted motion mode and active-free motion mode. The results of the experiments show that the proposed motion modes provide the intended forces effectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1823-1832
• /
• 2004

In this paper, we proposed a TDC based F/T sensorless active compliance control algorithm for a rehabilitation robot (KARES II). The preference of compliance of the disabled is presented by clinical testing at Korea National Rehabilitation Center with the disabled. The KARES II was designed to work 12 predefined tasks which are very essential for helping the disabled. Among the tasks, some contact tasks between the robot and the disabled exist. Therefore, TDC based F/T sensorless compliance control algorithm is developed for these tasks without additional cost. We verified the proposed algorithm with experiment. Also for the practical use, suitable compliance for contact tasks is chosen by clinical testing at Korea National Rehabilitation Center.

• Journal of Sensor Science and Technology
• /
• v.22 no.2
• /
• pp.118-123
• /
• 2013

Most serious stroke patients have the paralysis of their wrists, and can't use of their hands freely. But their wrists can be recovered by rehabilitation exercise. Recently, professional rehabilitation therapeutists exercise the wrists of stroke patients in hospital. But the wrists of stroke patients have not rehabilitated, because the therapeutists are much less than stroke patients in number. Therefore, the wrist bending-exercise rehabilitation robot that can measure the bending force of the patients' wrists is developed. In this paper, the three-axis force sensor was designed for the wrist bending-exercise rehabilitation robot. As a test results, the interference error of the three-axis force sensor was less than 0.85%. It is thought that the sensor can be used to measure the wrist bending force of the patient.

• Journal of Biomedical Engineering Research
• /
• v.40 no.3
• /
• pp.116-124
• /
• 2019

The rehabilitation training robots for treating the upper limbs of stroke patients were mainly focused on the upper proximal treatment of it, but recently studies of the distal parts of the upper limbs for rehabilitation of the hand is making some progress even though it is still a small number so far. In this paper, we present the hand robot for the rehabilitation training of stroke patients that is the fingertip contact-typed mechanism, and it has also equipped with the wrist rehabilitation unit to be worked like human hand that enables any movements through mutual cooperation by fingers while picking up or grasping objects. The robot that is presented for this purpose supports the movement of fingers with 5-DoF and the wrist with 3-DoF that moves independently, and operates with a structure that allows the joints of the wrist and fingers to be collaborated organically together to each other. Also, hereby the simulation and evaluation test on its robot mechanism are performed to ensure that fingers with 5-DoF and the wrist with 3-DoF of the serial kinematical mechanism are designed to comply with or exceed ROM for ADL.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.10
• /
• pp.879-883
• /
• 2015

Conventional gait rehabilitation requires at least three therapists in a traditional rehabilitation training program. Several robots have been developed to reduce human burden and increase rehabilitation efficacy. In this study, we present a lower-limb wearable robot (WA-H) for gait rehabilitation of hemiplegia patients, and propose a protocol of 12 weeks gait rehabilitation training program using WA-H. To identify the efficacy of the robot and protocols, we conducted a clinical study with two actual hemiplegia patients and observed a chronological change of ambulation ability through four assessments. We discovered the progression of results by 6 minute walking test, TUGT (Timed Up and Go Test), SPPB (Short Physical Performance Battery), BBS (Berg Balance Test), and Fugl-Meyer score. The torques generated in the normal side and paralyzed side of the patient became similar, indicating rehabilitation. The result also showed the walking of the paralysis patient improved and imbalance motion had considerable improved performance.

• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.309-318
• /
• 2003

In this paper a 6 degree-of-freedom robot was studied for medical purpose. In the past the robot used for industry field was utilized for medical robot but in these days the robot used for rehabilitation. welfare, and service. This system was Proposed for a stroke patient or a patient who can not use one arm. A master-slave system was constructed to exercise either paralysis or abnormal arm using normal arms movement. Study on the human body motion result was applied to calculate a movement range of humans elbow and shoulder. In addition, a force-torque sensor is applied to estimate the rehabilitation extent of the patient in the slave robot. Therefore, the stability of the rehabilitation robot could be improved. By using the rehabilitation robot, the Patient could exercise by himself without any assistance In conclusion. the proposed system and control algorithm were verified by computer simulation and system experiment.

• The Journal of Korea Robotics Society
• /
• v.8 no.1
• /
• pp.8-19
• /
• 2013

One of the important issues for structural and electrical specifications in developing a robot is to determine lengths of links and motor specifications, which need to be appropriate to the purpose of robot. These issues become more critical for a gait rehabilitation robot, since a patient wears the robot. Prior to developing an entire gait rehabilitation robot, designing of a 1DOF assistive knee joint of the robot is considered in this paper. Human gait motions were used to determine an allowable range of knee joint that was rotated with a linear type actuator (ball-screw type) and links. The lengths of each link were determined by using an optimization process, minimizing the stroke of actuator and the total energy (kinetic and potential energy). Kinetic analysis was performed in order to determine maximum rotational speed and maximum torque of the motor for tracking gait trajectory properly. The prototype of 1 DOF assistive knee joint was built and examined with a impedance controller.

• The Journal of Korea Robotics Society
• /
• v.11 no.2
• /
• pp.41-50
• /
• 2016

This paper describes the effect of a robot cognitive rehabilitation program on cognitive functions for the elderly with mild cognitive impairment, and compares it with traditional cognitive therapy programs. Three experiment groups including cognition therapy group, robot cognitive rehabilitation group, and hybrid group have been sampled and one comparative group has been organized for this research. 32 old people whose ages are between 61 and 88 with mild cognitive impairment participated in the programs with an admission of W care hospital. According to the program results, the cognitive therapy program alone had shown a positive effect on the attention function, and the robot cognitive rehabilitation program alone had a positive effect on the total intelligence and memory function. However, a simultaneous operation with both programs had shown a positive effect on the three intelligence areas such as total, basic, and management quotients as well as attention and memory functions as subsidiary factors. This paper has verified that the proposed robot cognitive rehabilitation program makes a positive effect on a cognitive function and plays a complementary role with traditional cognitive therapy programs.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.318-325
• /
• 2019

NREX, an upper limb exoskeleton robot, was developed at the National Rehabilitation Center to assist in the upper limb movements of subjects with weak muscular strength and control ability of the upper limbs, such as those with hemiplegia. For the free movement of the shoulder of the existing NREX, three passive joints were added, which improved its wearability. For the flexion/extension movement and internal/external rotation movement of the shoulder of the robot, the ball lock pin is used to fix or rotate the passive joint. The force and torque between a human and a robot were measured and analyzed in a reaching movement for four targets using a six-axis force/torque sensor for 20 able-bodied subjects. The addition of two passive joints to allow the user to rotate the shoulder can confirm that the average force of the upper limb must be 31.6% less and the torque must be 48.9% less to perform the movement related to the axis of rotation.