• Title/Summary/Keyword: Registration Conversion

Search Result 29, Processing Time 0.025 seconds

Preliminary Study on Digitalizing Registration Conversion (등록전환 수치화 방안 연구)

  • Lee, Du-Shin;Kang, Sang-Gu;Lee, Hyong-Sam
    • Journal of Cadastre & Land InformatiX
    • /
    • v.45 no.1
    • /
    • pp.151-167
    • /
    • 2015
  • At present cadastral surveying is being driven fort combination of digitalized cadastral map accord with real cadastral boundary between cadastral resurvey area and World Geodetic System transformation about all country. So this study is conducted to newly establish items being needed in making digitalization of parcel boundary points based on the World Geodetic System in registration conversion surveying. For this study firstly management of mountainous districts Act, related laws and registration conversion-related laws and regulations are reviewd. Secondly, economical, administrative validation by using data from 12-branch companies of LX is analyzed. Thirdly, surveying method and procedure were established through experimental surveying on the two cases such as digital and analog area. Finally, through investigating standard of estimate about cadastral surveying, it was calculated amendment of registration conversion surveying fee based on World Geodetic coordinate System.

An Observation on Bacteriological Conversion of Lapromatous Leprosy Cases Treated by Antileprosy Mobile Service (이동진료반(移動診療班) 치료(治療)에 의(衣)한 나종양환자(癩腫樣患者)의 균음전(菌陰轉)에 관(關)한 관찰(觀察))

  • Han, In-Soo
    • Journal of Preventive Medicine and Public Health
    • /
    • v.7 no.2
    • /
    • pp.313-318
    • /
    • 1974
  • An observation on bacteriological conversion upon 56 bocteriological positives out of 131 cases of lepromatous leprosy treated by antileprosy morbile service was carried out. Those 131 lepromatous cases were a part of 335 total registered from three Guns of Gangjin, Hwa sun, and Goheung, Cheollanamdo, since 1957 to 1973 that has been under the control of antileprosy morbile unit. The results obtained are summalized as follows, 1. Lepromatous type was 36.9% of all cases. The ratio of male to female was 4.9 to 1. Age between 30-44, the most productive ages, occupied 38.0% and age over 60 occupied 18.0% of all. 2. 42.7% of lepromatous type was bacteriological positive. 43.1% was for male and 43.1% was for female. Age between 20 to 24 shown the highest positive at 63.7% and followed by aged over 60 (62.5%) and under 19 (60.0%). The lowest one was seen at age between 40 to 44 at 29.2%. 3. Bacteriological positive rate at registration was different in accordance with duration of treatment received befor registration. It came up to the highest 100.0% at the group treated one year before registration. That of the group not received any treatment was 56.4%, and the group received 4-5 years was the lowest at 26.1% 4. Bacteriological conversion rate was 44.6% and 14.3% of all positive casese regressed in bacterial number. 37.5% of all active cases converted bacteriologically within 5 years. 5. Bacteriological conversion rate in group received 1 year treatment before registattion was 66.6%. That in group not received any treatment was 31.8% and group received 4-5 years was 33.3%. 6. Considering of total duration reaseved treatment together with before and after registration, 33.9% of all active cases resulted bacteriological conversion or regression within 5 years.

  • PDF

The Method of Evaluating The Potential for Conversion Legal Problems with Conversion And Basic Capacity of Vacant Onces in Tokyo

  • Sato, Kouichi;Matsumura, Shuichi;Namiki, Kenji
    • Proceeding of Spring/Autumn Annual Conference of KHA
    • /
    • 2002.11a
    • /
    • pp.301-306
    • /
    • 2002
  • In Japan, the vacancy rates of office buildings have been at high in big cities since 1992. This problem is especially acute in Tokyo, where it is estimated that over 2.27 million square meters of office floor area will be oversupplied in 2003: big urban redevelopment projects will be completed in 2003. Under these circumstances, International Cooperative Research and Development on Sustainable Urban Management by Conversion of Buildings, called “SUMCOB”, has been carried out. This research aims to regenerate urban areas by converting redundant offices into flats, although instances of conversion are still very few in Japan. This paper introduces part of current results by SUMCOB, and discusses legal problems with conversion and basic capacity of vacant offices in Tokyo. It has been confirmed that there are no constraints concerned with Real Estate Registration Law (although it requires the change of the registration after conversion). and City Planning Law. However, some criteria are incompatible with Building Standard Law and Fire Service Law if the use of the building is changed from offices to flats. Typical incompatibility between offices and flats is lightening. If the buildings do not satisfy criteria for flats, the cost of renovation works for conversion will increase. To examine the basic capacity of vacant office buildings for conversion, field surveys in Tokyo have carried out at three areas: Kodenmacho (Chuo-ku), Toranomon (Minato-ku), and Iwamonocho (Chiyoda-ku). They are typical office areas that are included in center core of Tokyo. In Chuo-ku, the oldest commercial area in Tokyo, textile merchants have been located their headquarters. In Minato-ku, many rental office buildings have been located and several large scale redevelopments are advancing. Chiyoda-ku includes Marunouchi area, which is the prime office area in Japan. Thirty percent of the buildings in survey areas suffer from over twenty percent vacant floor rate, and fifty five percent were constructed before 1990. Especially most of buildings over forty percent vacant floor rate were constructed in 1980s. Vacant office problems haven't been seen in old buildings in Tokyo yet. The number of dwelling units made from office space will influence the conversion scheme. Seventy percent of the office buildings in survey areas have floor area of less than two hundred square meters. If they have been subdivided into two bedrooms type or three bedrooms type, the number of dwelling units in a floor would be less than three. The difficulty of conversion planning derives from frontage size, depth size, and their proportion. The five categories are proposed to grasp actual requirements for converting offices into flats.

  • PDF

A Study on Establishment of Connecting Information Conversion Criteria for Mobile Electronic Notification Service of Private Institutions (민간기관 모바일 전자고지서비스를 위한 연계정보 변환기준 수립에 대한 연구)

  • Kim, JongBae
    • The Journal of the Convergence on Culture Technology
    • /
    • v.7 no.4
    • /
    • pp.735-743
    • /
    • 2021
  • The mobile electronic notice service (MENS) is a service that delivers a mobile electronic notice to a smartphone in the person's name through an authorized electronic document intermediary instead of a bill that was delivered by mail using paper. In order to provide the MENS, information is needed to identify the same user between the sending agency and the authorized electronic document relay. In this paper, we propose a standard for safe conversion and utilization of Connecting Information (CI) used as user identification information for MENS. In the proposed method, it is necessary for the requesting institution to send the electronic notice to provide the resident registration number to the identity verification institution and convert it into the CI. In this case, a safe and efficient MENS will be possible by proposing a review standard and processing method to verify the appropriateness of the conversion of CI. By applying the proposed method to the MENS, it can contribute to service activation and reinforcement of user privacy protection.

A Study on The Types and Traits of Conversion Design Methods of Modern Architecture for Renewal Use in Japan (일본에서의 근대건축물의 재생과 활용을 위한 킨버전디자인 수법의 유형과 특성에 관한 연구)

  • Lo, Jung-Eun;Park, Chan-Il
    • Korean Institute of Interior Design Journal
    • /
    • v.16 no.2 s.61
    • /
    • pp.40-50
    • /
    • 2007
  • This study started from my concern over maintenance and renewal of existing buildings and other seriously damaged Modern Architecture under the urban development. Above all, we must face up to reality of an increasing need of renovation of old buildings that are in its physical, social, and economical decrepitude. Currently, 25% of total buildings come under renovation period within 20 years, which means that we do not have enough time to decide the destiny of old buildings. In the city, there has been endless controversy over conversation and development. Recently the Cultural property Registration System made it possible a positive usage of non-designated cultural property with historical value. This very useful system renewed our perception on Modern Architecture as cultural property and also triggered peoples' interest in recreating new value beyond economical one. So we really need a balanced view that can bring into both growth of contemporary city and renewal use of Modern Architecture. Here, in this study I tried to solve that problem with Conversion Design and define what a realistic design way for them is. To get more reasonable result, I chose a factor analysis for 20 conversion projects in Japanese Modern Architecture. Conversion Design is a proper way to restore the identity of old buildings and the most effective way to sustainable use of Modern Architecture.

Digital Conversion of Analogue Cadastral Maps of Kathmandu Metropolitan City

  • Baral, Toya Nath;Acharya, Babu Ram;Subedi, Nab Raj
    • Proceedings of the KSRS Conference
    • /
    • 2003.11a
    • /
    • pp.973-977
    • /
    • 2003
  • Land is the only immovable property that can be used, as a means for agricultural production as well as a means for mortgage for financing industrial or commercial enterprises. Spatial technologies play a key role in managing our land, water and natural resources. Cadastral data is a major component for the development of Land Information System. Therefore, systematic land registration system based on accurate and scientific cadastral map are found inevitable for poverty alleviation, good governance and women empowerment through security of their rights on property, as well as the planning and development of a sustainable environmental protection within Metropolitan city. Digital cadastral parcel is the fundamental spatial unit on which database is designed, created, maintained and operated. Availability of accurate and updated cadastral maps is a primary requisite for successful planning, policy formulating and maintenance of city utility services, which need cadastral and utility information together. Flawed cadastral maps can put land, revenue and taxation system at stake. Kathmandu the capital city of Nepal still is lacking utility maps combining cadastral information with the utility. There is an urgent need to have an effective, accurate and easy to access land revenue and utility services system within the urban areas which could be achieved after the production of reliable base maps and land registration system to guarantee land allocation and property rights which can well be achieved by digital conversion and correction of base cadastral maps. This paper highlights the drawbacks of the conventional cadastral maps and the possible advantages of digital cadastral maps over these. Also the problems, issues and implications during digital conversion and creating database of the same will be discussed.

  • PDF

Study on Development of Technology Standards for Batch Conversion of CI between Private and Personal Identity Proofing Organizations for Safe Mobile Electronic Notification Service (모바일전자고지서비스를 위한 민간기관과 공인전자문서중계사업자 간 연계정보 활용방안에 관련 연구)

  • JongBae Kim
    • The Journal of the Convergence on Culture Technology
    • /
    • v.9 no.2
    • /
    • pp.483-491
    • /
    • 2023
  • Due to the spread of mobile devices, the use of mobile electronic notification services is increasing. For the mobile electronic notification service, the connecting information is required to identify the owner of the mobile device and the recipient of the notification. The connecting information is an online resident registration number, and safe management is essential. Therefore, in this paper, the processing flow, interconnecting standard, and management plan are proposed when a mobile electronic notification requesting agency requests the identity verification agency to convert the resident registration number of the recipient of the electronic notification to connecting information. In the proposed method, it is suggested that a safe mobile electronic notification service is possible by defining the process of collective conversion of connecting information between private organizations and personal identity proofing agency, information transmission and reception methods, and interworking standards.

A Study on the Development of Technology Standards for the Batch Conversion of CI between Private and Personal Identity Proofing Organizations for Safe Mobile Electronic Notification Service (안전한 모바일 전자고지서비스를 위한 민간기관과 본인확인기관 간의 연계정보 일괄변환 기술기준 개발에 관한 연구)

  • Kim, JongBae
    • The Journal of the Convergence on Culture Technology
    • /
    • v.8 no.3
    • /
    • pp.559-569
    • /
    • 2022
  • Due to the spread of mobile devices, the use of mobile electronic notification services is increasing. For the mobile electronic notification service, the connecting information is required to identify the owner of the mobile device and the recipient of the notification. The connecting information is an online resident registration number, and safe management is essential. Therefore, in this paper, the processing flow, interconnecting standard, and management plan are proposed when a mobile electronic notification requesting agency requests the identity verification agency to convert the resident registration number of the recipient of the electronic notification to connecting information. In the proposed method, it is suggested that a safe mobile electronic notification service is possible by defining the process of collective conversion of connecting information between private organizations and personal identity proofing agency, information transmission and reception methods, and interworking standards.

A Study on the Using Resident Registration Number and Alternatives for RRN (주민등록번호 사용현황과 대체수단에 관한 연구)

  • Choi, Haelahng;Chung, Chung-Yun;Choi, Sung-Eun;Pak, Hyejin;Kim, Chang-Soo;Ahn, Sung-Soo
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2012.11a
    • /
    • pp.907-909
    • /
    • 2012
  • 주민등록번호는 주민생활의 편익 증진과 행정사무의 적정한 처리를 목적으로 도입되었으나 인터넷의 발달과 함께 관행적이고 무분별하게 사용되어 왔다. 수집된 주민등록번호가 해킹 등의 유출사고로 명의도용 등 범죄에 악용될 우려가 커지자 이를 근본적으로 해결하기 위하여 2011년 방송통신위원회는 인터넷상 주민등록번호 수집 이용을 제한하는 법 제도적 정책을 추진하였다. 정보통신망법이 개정되어 주민등록번호의 사용이 제한되면서 사업자에게 본인확인, 연령확인 등 법률의무의 이행이나 고객의 분쟁조정 등 목적을 위해 주민등록번호를 대체할 본인확인수단이 필요하게 되었다. 본 논문에서는 주민등록번호를 이용자가 입력하지 않으며 보편적으로 사용하고 있는 인프라를 이용하고 단순한 입력정보의 변경을 통해 본인확인을 할 수 있는 방안을 제안한다.

A Research on Completeness Assessment of Blocks using DOF Restriction (자유도 제약을 이용한 블록의 완성도 평가 연구)

  • Kim, Chan Suk;Shin, Jong Gye;Noh, Jack You
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.51 no.5
    • /
    • pp.356-361
    • /
    • 2014
  • Accurate block shape assessment is critical for ship manufacturing and a careful assessment of the shape of a fabricated block against the design shape is a core issue. However, in current fabrication practice, the shape of each block is evaluated manually using rigid body transformation. This manual evaluation process entirely depends on workers' experiences and knowledge and makes automation of block shape assessment difficult. In this paper we propose a computation method on the registration for shape assessment of a block during the fabrication process and for evaluation of its completion against the design shape. A conversion on matching method by adding DOF(degree of freedom) restriction is required to reach the goals. We test our method using a real block quality assessment data to demonstrate its applicability to real ship manufacturing process.