• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.149-149
• /
• 1995

Monitoring of lead concentration in the ambient alt was performed in Kyung Hee University-Suwon Campus over a period of 5 year from November 1989 to September 1994 using a cascade impactor having 9 size stages. Lead level was analyzed by x-ray fluorescence. The lead levels have been extensively examined to identify annual trends, seasonal variations, and size distribution of lead concentration. Even though consumption of leaded gasoline has been decreased, the levels have not significantly changed during the sampling period. Probably other sources like fossil fuel emission and refuse incinerator will be potential contributors. The seasonal variation showed that Pb concentration significantly increased in the winter season and decreased in the summer season. The size distributions of Pb were observed to be unimodal distribution of the 1.1∼2.1 $mu extrm{m}$ sixte ranges in the winter and 0.65∼1.1 ㎛ in the summer.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.647-652
• /
• 2018

The emission of nitrogen oxides has a great environmental impact. It leads to Los Angeles type smog, and it recently has attracted attention as a source of ultrafine dust. The main sources of nitrogen oxides are internal combustion engines and industrial boilers. These emission sources are processes that are essential for human industrial activities, so the regulation of original use is impossible. Therefore, special control methods should be applied to reduce NOx emissions into the atmosphere. In this study, we investigated how the supply of ER and urea influences the removal of nitrogen oxides from SRF combustion boilers. Experimental results show that the removal efficiency of nitrogen oxides can be up to 80% under the conditions of ER 2.0 and a urea feed of 0.5 LPM.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.355-361
• /
• 2013

In this work, torrefaction of the sewage sludge was investigated the characteristics of torrefied products and the value of as energy resource to improve energy density and to maintain consistent quality of SRF. Torrefaction was performed two important torrefaction operational parameter, temperature($150-230^{\circ}C$) and reaction time(10-60min). As raising the torrefaction temperature at long reaction times, the moisture content of torrefied products was decreased, while the heating value was increased. Moreover, increasing of the torrefaction temperature led to a increase of the content of the carbon up to 60% compare to the initial the sample, and a decrease of the content hydrogen and oxygen. Especially, Average heating value was 4,818 kcal/kg regardless of the reaction time when torrefaction was performed over $210^{\circ}C$. In addition, the fuel ration and coal band were improved after torrefaction because the O/C and the H/C ratio were decreased.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.101-108
• /
• 2022

This study analyzed the physicochemical properties and combustion characteristics of dry food waste to evaluate the possibility of using food waste as a solid refuse fuel (SRF). The characteristics of dry food waste as a fuel were analyzed by comparing the difference in properties with SRF, and the combustion characteristics after conversion into fuel were identified. Ultimate analysis, proximate analysis, calorific value analysis, and TGA analysis were conducted using two types of food waste and two types of SRF, and the following results were obtained. The moisture content and ash content of dry food waste were 1.7~10.0 wt.% and 7.8~11.7 wt.%, respectively, which satisfied the quality standards for SRF. The low calorific value of dry food waste was 4,000 ~ 4,720 kcal/kg, which was higher than the quality standard of 3,500 kcal/kg for SRF. As a result of TGA analysis of dry food waste, the combustion reaction started at about 200 ℃ and the highest burning rate was at about 500 ℃. After moisture evaporation between 100 and 200 ℃, initial volatile matter, carbon and residual volatile matter were released and burned between 200 and 500 ℃. Based on the high calorific value and low moisture and ash content of dry food waste, it is considered that it is possible to convert dry food waste into SRF through the application of efficient drying technology and strict quality standard inspection in the future.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.43-50
• /
• 2015

An extensive literature survey and personal communication with relevant experts made it possible to understand economic and technical feasibility of disposable diaper recycling. Commercial level of soiled diaper recycling technology is currently available from a Dutch company, Knowaste Co., who owns a proprietary separation technology of the pulps, plastics and super absorbing polymer (SAP). In Korea, on the other hand, pre-consumer diaper recycling technology without material separation at its infancy converts manufacturing scraps into refuse plastic fuel (RPF), container/truck cargo boards or automobile boards/sheets. Although previous studies on feasibility of post-consumer recycling in Korea showed mutually contradictory implication, it was found out in this research that significantly positive economic feasibility can be obtained with pre-consumer diaper recycling. Subsequent recycling R&D including pre-consumer scrap and policy support may expedite 'Establishment of Sustainable Society.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.5
• /
• pp.469-476
• /
• 2000

This study was performed to understand the behavior and source characteristics of particulate trace metals in Daegu area. To do this, total of 84 samples had been collected from January to December 1999. TSP (total suspended particulate matter) and PM-10(particulate matter with aerodynamic diameters less 10${\mu}{\textrm}{m}$) were collected by filters on portable air sampler, and in TSP and PM-10 were analyzed by ICP(Inductively Coupled Plasma Spectrometer) after preliminary treatment. The results were follow as: first, annul means of TSP and PM-10 concentration were 123 and 69$\mu\textrm{g}$/㎤ respectively. The concentration of TSP adn PM-10 were highest in winter season compared to other seasons. Second, the concentration of Al, Fe, Mn were higher in TSP than in PM-10, indicating that these metals are generally associate with natural contributions. Third, a hierarchical clustering technique was used to group 9 metals. The results from the cluster analysis of TSP and PM-10 shows a similar clustering pattern : Fe, Al in a group and the rest of the metals such as Ni, Cr, As, Mn, Cd, Pb, Zn in the other group. One group of metal such as Fe, Al is associated with natural sources such as soil and dust. The other is closely related to urban anthropogenic sources such as fuel combustion, incineration, and refuse burning, Finally, using Al as a reference element, enrichment factors were used for identifying the major particulate contributors. The enrichment factors of Al. Fe<10 (standard value of enrichment factor) were considered to have a significant dust and soil source and termed nonenriched. Ni, Cr, As, Mn, Cd, Pb, Zn》10 is enriched and has a significant which is contributed by athropogenic sources.

• Resources Recycling
• /
• v.12 no.4
• /
• pp.58-64
• /
• 2003

A study on the preparation of RDF with ASR materials from shredder line of end-of-life vehicles has been peformed by using hot molding method. ASR materials used in the work were plastics, fibers and sponge which were cut by less than 10 mm in size prior to hot molding and 40, 60 and 80 mm mold in diameter were employed for RDF forming. It was found that heating temperature, heating time and mixing ratio of materials played an important role in the hot molding of ASR materials. Density of RDF samples Prepared in the work was in the range of 0.5∼0.9gr/ml depending on the hot molding conditions and it was decreased with increase in the content of sponge. Breaking strength of RDF samples was observed to 0.8∼3.0MPa and it was also increased with increase in density of RDF samples. Finally, when heating temperature was elevated, density of RDF was increased due to Increase in molten part of ASR materials which resulted in the enhancement of breaking strength of RDF.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.65-74
• /
• 2008

In this study, the composition and physico-chemical characteristics of municipal solid waste (MWS) which was treated in four different area were investigated. It is necessary to measure the characteristics of MSW to build a waste treatment and Refuse Derived Fuel (RDF) facility, the data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $78.15-199.8kg/m^3$. This MSW was composed of 8.87% of food wastes, 38.8% of papers, 34.12% of plastics & vinyls, 7.16% of textiles, 0.96% of wood, 1.3% of rubber & leathers and others, respectively. Most of MSW are composed of food, paper and plastic waste and more than 94% was combustible waste. For three components, moisture is 17.38%, combustible component is 69.03% and ash is 6.24%. The chemical element has the high order of carbon, oxygen, hydrogen on the dry basis of wastes. And the low heating value of the MSW which is measured by calorimeter is calculated as 2973.8 kcal/kg and high heating value of the MSW is calculated as 5209.94 kcal/kg.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.8
• /
• pp.5-15
• /
• 2016

As the increase of domestic sewage treatment plant and reinforcement of the standard of effluent water quality continues, the volumes of sewage sludge are consistently increasing. Existing treatment of sewage sludge, such as incineration and ocean dumping has been prohibited because of air pollution and prohibitions towards ocean dumping, and in turn, recycling and energy recovery from waste methods have being studied recently. However, the lack of technical level and systematic analyses of application technique are problems, that future analysis of such relative technique would be required. The present study has been investigated as follows, management technique of sludge, patent on refuse-derived fuel and increase biogas production and utilizable technology, trend of research paper. Furthermore, research development from five developed nations (Korea, Japan, China, United States, and United Kingdom), domestic and foreign have been investigated and analyzed by section. In this study, the future technical field which is required for effective management of sludge has been suggested.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.2
• /
• pp.99-105
• /
• 1991

This study was carried out to provide basic data to be necessary for the selection of an energy recovery process based on the characteristics of municipal solid wastes(MSW). The samples were collected at Kangdong-Ku in Seoul and conducted ultimate and proximate analyses. Laboratory scale anaerobic digesters were operated to determine the non biodegradable fractions of the wastes. The results indicated that carbon and hydrogen contents, and lower heating values could be calculated from the volatile contents of MSW by the following equations : C = 0.57 VS, H =0.084 VS, and HL=49.5 VS-(6-0.045VS) W. Nonbiodegradable fractions were respectively 58.9% of volatile matters and 77.7% of MSW. Incineration and refuse derived fuel(RDF) processes appeared to be the most efficient processes in terms of weight reduction and energy recovery, But determining the energy recovery processes, the fluctuations of heating values of MSW throughout a year and available landfill site and secondary pollution should be considered.