• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.588-593
• /
• 2010

New seven acrylic monomers with covalently bonded silicon, germanium, and tin were prepared for high refractive index materials. The monomers were copolymerized with a cross-linkable comonomer (Trimer) to prepare UV-films for optical characterization. The refractive index of the copolymers increased in proportion to the monomer content and extrapolated to determine that of homopolymer. $Ph_3Si$, $Ph_3Ge$, and $Ph_3Sn$ groups contributed to increase the refractive index of acrylic polymer, in which $Ph_3Sn$ was more effective than $Ph_3Ge$. The index increment confidently occurred with $Bu_3Sn$ attachment in comparison with aliphatic acrylic polymers. $Ph_3SnS$-attached acrylate polymer showed a refractive index of 1.671 at 589 nm. The index change was similarly observed at various different wavelengths (656, 830, 1310, and 1550 nm).

• Journal of IKEEE
• /
• v.14 no.4
• /
• pp.263-269
• /
• 2010

In this paper, we present high temperature characteristics of a tunable all-optical filter using fiber Bragg grating(FBG) filter in Ge doped and Ge & B co-doped fiber, including peak reflectivity, bandwidth and various normalized refractive index change with temperature variation. The reflection spectrum of a FBG filter with refractive index change is affected by its thermal stability. Consequently Ge doped FBG tunable filter has a better thermal stability than Ge & B co-doped FBG tunable filter. Also, both FBG tunable filters show good thermal stability up to about $500^{\circ}C$.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.109-113
• /
• 2004

We have manufactured and characterized the fiber-to-Planar Waveguide Coupler for analysis of the photo-induced refractive index change of DM-BTE .(l,2-bis[2,5-dimethylthio-phen-3-yl]-hexafluorocyclopentene) When irradiated with ultraviolet light, the colorless diarylethene(DM-BTE)-crystal turned red while keeping the crystal shape. The red color was bleached by irradiation with visible light(λ＞450 nm). The resonant wavelength was shifted and recovered owing to the refractive index variation of the planar waveguide because of its photo-functional properties on exposure to UV and visible light. The wavelength responses of this switch by UV exposure were measured as 0.057 nm/sec with saturation time of 60 seconds. and when illuminated by visible light, resonance wavelength variations were measured as 0.028 nm/sec, with recovery time of 140 seconds.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.163-170
• /
• 2011

In this paper, we analyzed the phase change of 5-triangular trihedral comer reflectors by using X-band Ground-Based Synthetic Aperture Radar (GB-SAR) system. Each reflector was set as a stationary target at a different distance from the system. We obtained total 123 full-polarization images during 40 hours continuously at 20 minute interval. Results of SAR interferometric analysis showed phase changes of maximum 2 radians and followed similar pattern with atmospheric data. Through a GB-SAR phase formula that includes refractive index in the air, we performed regression analysis for refractive index as a function of atmospheric humidity, temperature and pressure. As a result, refractive index of air in X-band showed relatively high coefficient of determination with humidity and temperature (0.72 and 0.76 on average, respectively) but not so with pressure (0.34). The refractive index of air in X -band changed by 3.14\;{\times}\;10^{-5}$ during the measuring time with a humidity range of 50% ~ 90% and a temperature range of $-1^{\circ}C$ ~ $9^{\circ}C$. We expect that a total expression of refractive index of air including humidity, temperature and pressure can be calculated when more extensive data would be collected at various atmospheric conditions.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.181-187
• /
• 1999

We prepared the side-chain type nonlinear optical NPP(N-(6-nitrophenyl)-(L)-prolinol) polymer films by spin coating method. Ellipsometric spectra were in situ collected by using spectroscopic phase modulated ellipsometer while the NPP polymer films were being corona poled at the temperature above glass transition. We calculated film thickness and the refractive index dispersion by modeling the spectro-ellipsometry data in transparent region. We also calculated the refractive index and the extinction coefficient of the polymer films by numerically inverting the spectro-ellipsometry data in absorbing region, while the previously determined film thickness was used. The independently determined extinction coefficient spectra from the analysis of transmission spectra were compared with those by spectro-ellipsometry and they showed an excellent agreement with each other. From the analysis of the complex refractive index change of the NPP polymer thin films induced by the corona poling, we could determine the vertical complex refractive index and the horizontal complex refractive index separately. Using the volume fraction of the vertical component f⊥, the degree of poling of poled NPP polymer films was quantitatively addressed. It is suggested that the present method can be used to quantitatively address the degree of poling in an absolute manner and to depth profile the poled fraction of thick polymer films. It will be useful to understand the structural change of polymer films and hence the poling mechanism during the poling process.

• Laser Solutions
• /
• v.17 no.2
• /
• pp.19-25
• /
• 2014

Optical embedded diffraction gratings with the bulk modification in BK-7 glass plates excited by tightly focused high-intensity femtosecond (130fs) Ti: sapphire laser (peak wavelength = 790nm) were demonstrated. The structural modifications with diameters ranging from 400nm to $4{\mu}m$ were photo-induced after plasma formation occurred upon irradiation with peak intensities of more than $1{\times}1013W/cm^2$. The graded refractive index profile was fabricated to be a symmetric around from the center of the point at which low-density plasma occurred. The maximum refractive index change was estimated to be $1.5{\times}10^{-2}$. The two optical embedded gratings in BK-7 glass plate were demonstrated with refractive index modification induced by the scanning of low-density plasma formation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.247-250
• /
• 2001

We studied optical properties of SiON thin-film in the applications of optical waveguide. SiON thin-film was grown in $300^{\circ}C$ by PECVD(plasma enhanced chemical vapor deposition) system. The change of SiON thin-film composition and refractive Index was studied as a function of varying $NH_3$ gas flow rate. As $NH_3$ gas flow rate was increased, Quantity of N and refractive index were increased at the same time. By the results, we could form the SiON thin-film to use of a waveguide with refractive index of 1.6. We analyzed the conditions of the thin-film with FTIR(fourier transform infrared) and OES (optical emission spectroscopy). N-H bonding($3390cm^{-1}$ ) can be removed by thermal annealing. And we could observe the SiH bonding state and quantity by OES analysis in $SiH_4$

• Korean Journal of Materials Research
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2017

Zirconia nanoparticles were widely used as filler in order to get high refractive index layer. However, dispersion of nanoparticles is difficult due to their agglomeration in solvent. In this study, the dispersibility of the zirconia suspension is promoted by controlling the steric hindrance and electrostatic interactions through the adsorption of PEI according to alkali treatment time. Also, to induce improved dispersibility on suspension, we changed the dispersion conditions variously and fabricated an ink formulation method for the coating layer. Zirconia suspension was characterized by dynamic light scattering (DLS), Zeta potential measurement, Transmission Electron Microscope (TEM) and FT-IR. We were able to confirm that good dispersion of zirconia suspension by alkali treatment and PEI led to high refractive index.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.247-250
• /
• 2001

We studied optical properties of SiON thin-film in the applications of optical waveguide. SiON thin-film was grown in 300$^{\circ}C$ by PECVD(plasma enhanced chemical vapor deposition) system. The change of SiON thin-film composition and refractive Index was studied as a function of varying NH$_3$ gas flow rate. As NH$_3$ gas flow rate was increased, Quantity of N and refractive index were increased at the same time. By the results, we could form the SiON thin-film to use of a waveguide with refractive index of 1.6. We analyzed the conditions of the thin-film with FTIR(fourier transform infrared) and OES(optical emission spectroscopy). N-H bonding(3390cm$\^$-1/) can be removed by thermal annealing. And we could observe the SiH bonding state and quantity by OES analysis in SiH$_4$

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.423-428
• /
• 2015

A bimetallic chip made of gold and silver was investigated in intensity interrogation mode to confirm enhancement of the SPR sensor resolution. Both reflectance curves of the bimetallic chip and the conventional gold chip was acquired and compared. The line width of the reflectance curve of the bimetallic chip was narrower than that of the conventional Au chip, resulting in steeper tangential slope. The reflectance was monitored at the angle related to the steepest tangential slope. The change in reflectance of the bimetallic chip was larger than that of the Au chip. The critical angle was analyzed by differentiating the reflectance with respect to incident angle twice. Acquiring the critical angle regarding to the sample informs the refractive index of the sample. Using various concentration of Bovine Serum Albumin, we confirmed that refractive index was linearly related to variation of reflectance of the bimetallic chip.