• 한국안광학회지
• /
• 제4권1호
• /
• pp.7-14
• /
• 1999

본 논문에서는 한국인 17세에서 30세사이의 38명을 대상으로 Vision Tester로 자각적 굴절이상을 측정하고, 난시가 있는 사람은 등가구면도수틀 취했다. 각막 굴절력과 곡율반경은 Baush & Lomb사 Keratometer로 측정했으며 전방의 깊이, 수정체의 두께, 초자체의 깊이, 안축의 길이 등은 A-mode Ultrasonography로 측정 했고, 각막 두께는 Phakometry로 측정했다. 굴절이상과 안광학요소의 상관계수를 구한 결과 안축의 길이, 초자체의 깊이, AL/CR 비와는 각각 0.95, 0.96, 0.95로 아주 높은 상관관계가 있었고, 각막곡율반경, 굴절력, 수정체의 두께와는 각각 0.60, 0.66, 0.67로 나타났으며, 각막의 두께와는 괄목할 만한 상관관계가 없었다.

• 한국안광학회지
• /
• 제16권2호
• /
• pp.187-193
• /
• 2011

목적: 굴절부등안과 동등안에서 안축장, 각막굴절력, 전방깊이, 안축장/각막곡률반경 비 등의 차이를 비교하여 굴절요소와 굴절부등의 연관성을 알아보고자 하였다. 방법: 본 연구는 2010년 8월부터 2010년 9월까지 광주광역시 B병원에서 굴절검사를 통해 안경과 콘택트렌즈 처방을 받고자 하는 환자 중 2.7~15.3세 총 83명, 굴절부등안 45명(90안)과 굴절동등안 38명(76안)을 대상으로 하였다. IOL Master를 이용 안축장과 전방깊이, 각막곡률반경, 각막굴절력을 측정하였고, Auto-refractometer를 이용하여 굴절이상을 측정하였다. 결과: 굴절부등안은 안축장이 유의하게 차이가 났으며, 굴절부등안과 동등안에서 굴절이상, 안축장, 안축장/각막곡률반경 비 등이 통계적으로 유의한 차이가 있었다. 굴절부등을 일으키는 요인은 45명 전원이 안축장으로 나타났다. 굴절요소 중 안축장, 안축장/각막곡률반경 비는 상관성이 높았고, 각막굴절력은 상관이 없었으며 전방깊이는 상관성이 적은 것으로 나타났다. 결론: 굴절이상은 대부분 안축장에 의한 축성 비정시이었으며, 굴절부등의 원인도 다른 굴절요소와는 상관성이 적고, 안축장 차이가 주된 원인임을 알 수 있었다.

• ETRI Journal
• /
• 제36권5호
• /
• pp.847-855
• /
• 2014

We developed a highly refractive index planarization layer showing a very smooth surface for organic light-emitting diode (OLED) light extraction, and we successfully prepared a highly efficient white OLED device with an embossed nano-structure and highly refractive index planarization layers. White OLEDs act as an internal out-coupling layer. We used a spin-coating method and two types of $TiO_2$ solutions for a planarization of the embossed nano-structure on a glass substrate. The first $TiO_2$ solution was $TiO_2$ sol, which consists of $TiO_2$ colloidal particles in an acidic aqueous solution and several organic additives. The second solution was an organic and inorganic hybrid solution of $TiO_2$. The surface roughness ($R_a$) and refractive index of the $TiO_2$ planarization films on a flat glass were 0.4 nm and 2.0 at 550 nm, respectively. The J-V characteristics of the OLED including the embossed nano-structure and the $TiO_2$ planarization film were almost the same as those of an OLED with a flat glass, and the luminous efficacy of the aforementioned OLED was enhanced by 34% compared to that of an OLED with a flat glass.

• ETRI Journal
• /
• 제31권6호
• /
• pp.675-679
• /
• 2009

$Ti_xSi_{1-x}O_y$ (TSO) thin films are fabricated using plasma-enhanced atomic layer deposition. The Ti content in the TSO films is controlled by adjusting the sub-cycle ratio of $TiO_2$ and $SiO_2$. The refractive indices of $SiO_2$ and $TiO_2$ are 1.4 and 2.4, respectively. Hence, tailoring of the refractivity indices from 1.4 to 2.4 is feasible. The controllability of the refractive index and film thickness enables application of an antireflection coating layer to TSO films for use as a thin film solar cell. The TSO coating layer on an Si wafer dramatically reduces reflectivity compared to a bare Si wafer. In the measurement of the current-voltage characteristics, a nonlinear coefficient of 13.6 is obtained in the TSO films.

• Current Optics and Photonics
• /
• 제8권3호
• /
• pp.230-238
• /
• 2024

The refractive index is a key material-design parameter, especially for high-refractive-index glasses, which are used for precision optics and devices. Increased demand for high-precision optical lenses produced by the glass-mold-press (GMP) process has spurred extensive studies of proper glass materials. B₂O₃, SiO₂, and multiple heavy-metal oxides such as Ta₂O₅, Nb₂O₅, La₂O₃, and Gd₂O₃ mostly compose the high-refractive-index glasses for GMP. However, due to many oxides including up to 10 components, it is hard to predict the refractivity solely from the composition of the glass. In this study, the refractive index of optical glasses based on the B₂O₃-La₂O₃-Ta₂O₅-SiO₂ system is predicted using machine learning (ML) and compared to experimental data. A dataset comprising up to 271 glasses with 10 components is collected and used for training. Various ML algorithms (linear-regression, Bayesian-ridge-regression, nearest-neighbor, and random-forest models) are employed to train the data. Along with composition, the polarizability and density of the glasses are also considered independent parameters to predict the refractive index. After obtaining the best-fitting model by R² value, the trained model is examined alongside the experimentally obtained refractive indices of B₂O₃-La₂O₃-Ta₂O₅-SiO₂ quaternary glasses.

• ETRI Journal
• /
• 제31권6호
• /
• pp.667-674
• /
• 2009

Terahertz time-domain spectroscopy has been used to study the optical and dielectric properties of three chalcogenide glasses: $Ge_{30}As_8Ga_2Se_{60}$, $Ge_{35}Ga_5Se_{60}$, and $Ge_{10}As_{20}S_{70}$. The absorption coefficients ${\alpha}({\nu})$, complex refractive index n(${\nu}$), and complex dielectric constants ${\varepsilon}({\nu})$ were measured in a frequency range from 0.3 THz to 1.5 THz. The measured real refractive indices were fitted using a Sellmeier equation. The results show that the Sellmeier equation fits well with the data throughout the frequency range and imply that the phonon modes of glasses vary with the glass compositions. The theory of far-infrared absorption in amorphous materials is used to analyze the results and to understand the differences in THz absorption among the sample glasses.

• 한국안광학회지
• /
• 제17권3호
• /
• pp.299-303
• /
• 2012

목적: 초등학생을 대상으로 근시성 굴절이상과 안광학 성분들 사이의 관련성을 알아보고자 하였다. 방법: 안질환이 없는 근시성 굴절이상 62명을 대상으로 굴절검사, 각막곡률반경, 전방깊이, 수정체두께, 안축장을 측정하고 분석하였다. 결과: 초등학생의 근시성 굴절이상은 안축장(저학년 r=-0.653, p=0.000/고학년 r =-0.742, p=0.000), AL/CR비(저학년 r=-0.571, p=0.000/고학년 r=-0.852, p=0.000)와 음의 상관성을 보였다. 결론: 초등학생의 근시성 굴절이상은 안축장과 및 AL/CR비와 상관성이 매우 높음을 알 수 있었다.

• 디지털융복합연구
• /
• 제14권11호
• /
• pp.435-440
• /
• 2016

양안 굴절이상 차이에 의한 안광학상수 변화도 분석을 통한 양안 굴절이상 차이의 특성을 이해 할 수 있는 기초자료를 제공하고자 하였다. 20-59세의 건강한 성인 100명을 대상으로 KR-8800을 이용하여 등가구면 굴절력과 각막곡률 반경을, IOL Master를 사용하여 안축장길이와 전방깊이를 측정하였으며, 측정값의 차이는 우안 측정값-좌안 측정값의 차이값에 절대 값을 구하여 사용하였다. 전체 대상자의 등가구면 굴절력은 $-1.83{\pm}2.17D$이고, 안축장길이는 23.00~24.99mm, 각막곡률반경은 7.50~7.89mm, 전방깊이는 3.60~4.09mm의 범위에서 가장 많았다. 양안 등가구면 굴절력 차이에 따른 양안 안축장길이 차이와 양안 전방깊이의 차이가 유의한 상관관계가 있었다. 또한, 양안 굴절력 차이에 의한 양안 안축장 길이 차이가 가장 크고, 가장 높은 상관성이 있었다. 양안 굴절력 차이는 안광학 상수와 밀접한 관계가 있고, 양안 굴절력 차이에 의하여 여러 가지 시기능 문제가 발생 할 수 있으므로, 양안 굴절이상 차이에 따른 요인별 분류를 통한 융복합 연구가 필요하다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.200-203
• /
• 2001

Micromolding methods such as micro-injection molding and micro-compression molding are most suitable for mass production of plastic micro-optics with low cost. In this study, plastic micro-optical components, such as refractive microlenses and diffractive optical elements(DOEs) with various grating patterns, were fabricated using micro-compression molding process. The mold inserts were made by ultrapricision mechanical machining and silicon etching. A micro compression molding system was designed and developed. Polymer powders were used as molded materials. Various defects found during molding were analyzed and the process was optimized experimentally by controlling the governing process parameters such as histories of mold temperature and compression pressure. Mim lenses of hemispherical shape with $250{\mu}m$ diameter were fabricated. The blazed and 4 stepped DOEs with $24{\mu}m$ pitch and $5{\mu}m$ depth were also fabricated. Optical and geometrical properties of plastic molded parts were tested by interferometric technique.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.305-308
• /
• 2014

Organosilyl-modified and star-shaped poly (${\varepsilon}$-caprolactone) (m-PCL) was prepared, and added to polymethylsilsesquioxane (PMSSQ), to make composites. The end groups of m-PCL are chemically similar to PMSSQ, and m-PCL mixed well with PMSSQ in the composite. Porous PMSSQ film was made by further calcination of the composite film at elevated temperature. m-PCL-templated PMSSQ and the as-prepared porous PMSSQ were structurally, optically, and thermally characterized in thin films. The chemical binding of m-PCL and PMSSQ effectively suppressed the phase separation of PMSSQ and m-PCL during the curing process. After calcination at elevated temperature, there remained many pores in the PMSSQ matrix. The refractive indices of the resulting porous PMSSQ thin films decreased with increase of the film porosities, depending on the initial m-PCL loadings.