• 제목/요약/키워드: Refraction Rate

검색결과 45건 처리시간 0.032초

해운대 해빈의 해안선변형 예측 모형 (Shoreline Change Model in Haeundae Beach)

  • 박일흠;이종섭
    • 한국해안해양공학회지
    • /
    • 제1권1호
    • /
    • pp.50-62
    • /
    • 1989
  • 지형이 복잡하고 해빈 배후에 안벽이 존재하는 해운대 해빈의 해안선변형을 계산하였다. 외력이되는 쇄파시 에너지플럭스 및 파향을 굴절 및 파고의 공간적 분포에 의한 회절을 고려하는 수치모형으로 계산하였다. 그리고 연안방향의 파고분포와 안벽의 간섭을 고려하는 연안표사량과 경험적 상수 및 sink항을 청정 매개변수로 취급하여 해안선변형을 계산하였다. 검정기간 중의 관측치와 계산치는 비교적 잘 일치하였다. 그리고 검증으로 구한 매개변수를 사용하여 해운대 해변의 장기변화 예측치를 제시하였다.

  • PDF

DC magnetron 방법과 RF 스퍼터링 방법으로 제작된 Nickel Oxide 박막의 특성 연구 (A study of Nickel Oxide thin film deposited by DC magnetron and RF sputtering method)

  • 최광남;박준우;백숭호;이호선;곽성관;정관수
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2007년도 하계종합학술대회 논문집
    • /
    • pp.441-442
    • /
    • 2007
  • We deposited nickel oxide(NiO) thin films on silicon(Si) substrates at Room temperature and $500^{\circ}C$ using a nickel target by reactive DC and RF sputtering. In addition, we anneal to NiO thin films deposited at room temperature. Using spectroscopic eillipsometry, we obtained optical characteristics of every films. We discussed relations of the optical and structural properties of NiO thin films with the oxygen flow rate, substrate temperature and annealing temperatures. Refraction was decreased and defect was increased when NiO thin films was annealed. We also analyzed the electrical characteristics of NiO films which deposited DC and RF sputtering method.

  • PDF

게이트 자동화를 위한 컨테이너 식별자 인식 시스템 (Container Identifier Recognition System for GATE Automation)

  • 유영달;강대성
    • 한국항만학회지
    • /
    • 제12권2호
    • /
    • pp.225-232
    • /
    • 1998
  • Todays, the efficient management of container has not been realized in container terminal, because of the excessive quantity of container transported and manual system. For the efficient and automated management of container in terminal, the automated container identifier recognition system in terminal is a significant problem. However, the identifier recognition rate is decreased owing to the difficulty of image preprocessing caused the refraction of container surface, the change of weather and the damaged identifier characters. Therefore, this paper proposes more accurate system for container identifier recognition as suggestion of LSPRD(Line-Scan Proper Region Detection) for stronger preprocessing against external noisy element and MBP(Momentum Back-Propagation) neural network to recognize the identifier.

  • PDF

특허 및 논문 분석을 통한 디스플레이용 접착제의 기술경쟁력 분석 (Research Trend of OCA (Optically Clear additive) for Display Panel by Analysis of Patent and Papers Publication)

  • 우창화
    • 반도체디스플레이기술학회지
    • /
    • 제17권3호
    • /
    • pp.75-84
    • /
    • 2018
  • According to IHS, the overall display market is expected to grow at an average annual rate of 6% from $ 104 billion in 2016, to $ 138 billion in 2021. Among them, the OLED display panel will grow from $ 15 billion to $ 41 billion over the same period, forecasting a high annual growth rate of 22%. However, the refraction index, light leakage, bubble generation, adhesion deterioration, peeling phenomenon, moisture resistance, light transmittance, low turbidity. OCA (optically clear adhesive), which solves problems such as improving the resistance of the conductive film, is largely dependent on imported products. In addition, in 2016, the world market is worth KRW4.3 trillion, and the adhesive market has a large market effect. In this study, we tried to analyze the technical competitiveness of patent and thesis by classifying OCA (optically clear adhesive, optical adhesive) for display panel by curing method. As a result of the study, the amount of patents and papers in Korea was found to be superior to other competitors, but the quality level was low. In particular, it was found that the achievements of the papers in the hot melt field are lacking and the government should expand its support.

Numerical Simulation and PIV Measurement on the Internal Flow in a Centrifugal Mini Pump at Low Flow Rate Conditions

  • Yuan, Hui-Jing;Shao, Jie;Cao, Guang-Jun;Liu, Shu-Hong;Wu, Yu-Lin
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년 영문 학술대회
    • /
    • pp.775-780
    • /
    • 2008
  • This paper reports on the internal flow of a centrifugal mini pump working at the low flow rate operating conditions. The RNG $\kappa-\varepsilon$ turbulence model was employed to simulate the three-dimensional turbulent flow in the pump. To examine and certify the simulation results, a transparent acrylic centrifugal mini pump model which is suitable for PIV measurement has been developed. The tongue region and the passages region between blades were investigated using PIV. In order to eliminate the effect of refraction on the area closed to the wall and increase the measurement accuracy, the fluorescent particles were scatted into the working fluid with the tracing particles. It is found from the calculation and PIV measurement results that there is a large area of recirculation flow near the tongue at low flow rate operating conditions. The computationally predicted water head using the $\kappa-\varepsilon$ turbulence model at low flow rate operating conditions are in very good agreement with the experimentally measured water head and the mean velocity distributions at investigation area obtained by PIV and calculation showed a satisfactory agreement as well. Meanwhile, the results of PIV measurements show that the flow status in one passage is different to another. And for capturing the internal flow detail information, the $\kappa-\varepsilon$ turbulence model is not very suitable.

  • PDF

VDT 작업 전·후 시기능 변화 (The Investigation of the Changes of Visual Problems in VDT Workers)

  • 강명진;최오목
    • 한국안광학회지
    • /
    • 제7권2호
    • /
    • pp.33-39
    • /
    • 2002
  • 18세에서 30세 중반 사이의 남자 35명 여자 21명 총 56명을 대상으로 2시간 동안 VDT 작업을 하도록 한 후, 안구 및 전신 증상 등을 조사하고 순목 횟수, 눈물층파괴시간(BUT), 안검열의 높이, 시력, 타각적 굴절력, 조절력 등을 측정하였다. 안구증상에서는 눈의 피로를 느끼는 사람이 34%로 가장 많았고 시기능증상에서는 물체가 흐려 보이는 증상이 83%, 전신증상에서는 어깨가 아픈 사람이 38%로 가장 높게 나타났다. VDT 작업 중의 순목 횟수가 8/min로 휴식 때의 22/min에 비해 많이 감소했다. VDT 작업 직후의 눈물층파괴시간도 약 7초로 작업 전의 약 12초보다 현저히 감소되었다. 안검열의 높이는 작업 전 7.69mm보다 작업 중에는 9.04mm로 증가하였다. 평균 나안시력은 VDT 작업 전에 0.63에서 작업 후에는 0.57로 약 9.5% 감소하는 경향을 보였고, 타각적 굴절이상은 0.28D 정도 근시화 경향이 보였다. VDT 작업 후 조절력은 1.49D 정도 감소하였는데 주로 조절근점 굴절력의 감소가 원인인 것으로 보인다. 폭주근점 굴절력도 0.87D 감소하였다.

  • PDF

광주지역 고등학교 3학년생의 비정시안의 굴절상태에 대한 고찰 (Relationship on the Refractive Status of the High School 3rd Grade Students with Subnormal Visual Acuity in Gwangju Metropolitan City)

  • 윤영;유근창
    • 한국안광학회지
    • /
    • 제12권3호
    • /
    • pp.105-110
    • /
    • 2007
  • 본 연구는 광주지역 고등학교 3학년생 111명 222안을 대상으로 굴절상태를 자각적, 타각적 검안을 토대로 조사, 시행하여 안질환이 없는 학생의 비정시의 정도 및 굴절상태를 연구하였다. 눈의 형태는 근시가 85% 원시가 1% 그리고 정시가 14%로 나타났다. 굴절 이상안은 단순근시 38%, 근시성 단난시 4%, 근시성 복난시 56%, 단순원시 0%, 원시성 단난시 0%, 원시성 복난시 2%, 혼합난시 0% 순이었다. 난시의 축은 직난시 92%, 도난시 6%, 사난시 2%순이었다. 난시의 굴절력은 0.5D에서 1.0D가 68%, 1.0D에서 2.0D가 25%, 2.0D 이상이 7% 이었다. 근시성 굴절 이상안의 등가구면 굴절력은 -0.50D에서 -2.0D 이하 26%, -2.0D에서 -6.0D 이하에서 55%, -6.0D 이상이 19% 이었다. 안경 착용률은 74%로 20년 전에 비해 증가함을 알 수 있었다. 검안은 안경원에서 91%, 안과에서 9% 이었다. 최근 시력검사가 5개월이 넘은 학생 중에 안경렌즈 교체가 필요한 등가구면 굴절력이 0.5D가 넘은 경우는 80% 이었다.

  • PDF

VDT 작업 후의 조절기능 변화 (Changes in Accommodative Function after VDT Work)

  • 서은선
    • 한국안광학회지
    • /
    • 제17권3호
    • /
    • pp.285-291
    • /
    • 2012
  • 목적: VDT 작업이 조절기능에 주는 영향을 알아보고자 하였다. 방법: 조절기능 이상과 전신 및 안질환이 없고 교정수술을 받은 경험이 없는 대학생 48명(남 16명, 여 32명)을 대상으로 VDT 작업 전과 2시간 작업 후의 굴절력, 조절래그, 조절용이성, 상대조절력과 최대조절력, 순목 횟수 값을 측정하였다. 원거리 굴절교정 도수를 착용한 상태에서 모든 검사를 실시하였고 VDT 증후군의 자각증상에 관련된 항목에 대해 설문조사를 실시하였다. 결과: 2시간동안 VDT 작업 후의 굴절력변화는 0.23 D 증가하였고, 조절래그 변화량은 우안에서는 $0.17{\pm}0.42D$, 좌안에서는 $0.23{\pm}0.47D$(t=2.26, p=0.03) 만큼 증가하였고 통계적으로 유의한 차이를 나타내었다. 조절용이성과 상대조절력과 조절력은 VDT 작업 후에 모두 감소하는 경향을 보였으나, 순목 횟수는 증가하는 양상을 보였다. VDT 작업 후 안정피로가 33.4%, 어깨통증이 33.3%의 자각증상을 보였다. 결론: 2시간 VDT 작업 시간에 따라 조절래그는 증가하였고, 전반적인 조절기능의 능력이 감소하는 경향을 보였으며, 시각적 부담을 주는 증상으로는 안정피로가 가장 높은 자각도를 보였다.

신경회로망을 이용한 순 티타늄판재의 음향이방성 평가 (Acoustical Anisotropy Evaluation of Pure Titanium plate Using Neural Network)

  • 박희동;윤인식;이원
    • 한국정밀공학회지
    • /
    • 제28권9호
    • /
    • pp.1103-1109
    • /
    • 2011
  • This research quantitatively confirmed an acoustical anisotropy that exists in a pure titanium plate from the signal of ultrasonic flow detection and suggested a new way to evaluate the acoustical anisotropy by inputting acquired characteristic of ultrasound signal into the neutral network. Using the fact with the suggested method that the characteristic of ultrasound signal is shown differently depending on the pure titanium plate's rolling direction, the neural network was constructed by extracting the characteristic that can decide each direction of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ with waveform analysis program. As a result of inputting the characteristic of ultrasound signal acquired from a random rolling direction into the neural network that was built like this, it showed a pattern recognition rate higher than 95% on directions of $0^{\circ}$, $45^{\circ}$, $90^{\circ}$.

카세그레인 광학계를 사용한 광무선통신 시스템에서 550[nm], 850[nm] 및 1550[nm]의 광 파장에 대한 안개 및 포인팅의 에러의 영향에 대한 해석 (Numerical Study on the Wireless Communication at 550[nm], 850[nm] and 1550[nm] Wavelength LD in Fog and Pointing Error using Cassegrain Optics)

  • 홍권의
    • 조명전기설비학회논문지
    • /
    • 제22권12호
    • /
    • pp.164-175
    • /
    • 2008
  • 안개 및 대기의 교란이 광무선 통신에 주는 영향을 해석하기 위해 가시광선영역의 LD(laser diode) 및 적외선 영역의 LD 사용하고, 카세그레인 광학계를 이용하여 광을 송수신하게 하였으며, 광 소신소자로는 APD(avalanch photo diode)를 사용함을 가정하여 대기 중의 안개의 정도에 따른 가시도 및 교란의 세기를 나타내는 굴절률 구조상수에 따른 광 수신 전력, 잡음 전력을 고려한 SNR(signal to noise ratio)을 계산해 보고 각각의 통신 상태에서 BER(bit error rate)이 $10^{-9}$이 가능한 통신 거리를 알아보았다.