• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.190-196
• /
• 2004

ACR(All Clear Reflector), also widely referred to as FFR(Free Form Reflector), were designed in general and intelligent ways using a NUDBS surface for the mathematical modelling of the reflector shape and artificial intelligence as the optimum design algorithm. An ACR, which consists of a continuous surface reflector and clear outer lens, offers styling advantages and provides a high quality light performance. The clear outer lens of an ACR remains efficient even with a highly inclined shape, as in the design of a sports car, as well as the complete clearness of the reflector surface eliminates the nuisance of stray light caused by the steps between adjacent segments of multi-faced reflectors. The application of an ACR to low beam lamp was so sucessful to obtain the sharp cut-off with the lens-free single-surfaced-smooth reflector. The design technique of ACR was tested with all types of lamps, including low beams, high beams, and fog lamps.

• 한국항해항만학회지
• /
• 제27권3호
• /
• pp.267-272
• /
• 2003

This paper describes design method of Passive-type Radar Reflector (PRR) which is to provide the requirement of newly revised 2000 SOLAS regulations on the Radar Reflector. The main target of this work is to find the optimum shape of a radar target having large Radar Cross Section (RCS). Through the RCS analysis based on the theoretical approach, two kinds of PRR models, RRR-F model for use in fisheries and PRR-S model for use in small sized ship, are designed and discussed their RCS performance. RCS measurement tests for the various sized samples are carried out in an anechoic chamber. As evaluation results it was clearly shown that the conventional sphere-type shows optimum shape in case of PRR-S, while the cylinder-type which consists of large sized corner clusters or zig-zag flat plats gives best performance in case of PRR-F.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.40.2-40.2
• /
• 2010

The Solar Daylighting Technology is considered with the plan that will be able to embody the energy technology which is possible to continue. Daylighting has an considerable advantage of the high effectiveness and the various use because daylighting can use the infrared ray, the visible ray and the ultraviolet rays without energy transformation. In this study, the experiment is tried of making the shape and an arrangement of the reflector different After establishing the reflector in the height(10m) which is fixed. It's also researched on the shape of the efficient reflector using the program(Trace Pro) at the time of the autumnal equinox and the winter solstice at fixed hours.

• 한국환경과학회지
• /
• 제16권3호
• /
• pp.255-260
• /
• 2007

The photocatalytic decolorization of Rhodamine B (RhB) was studied using packed-bed reactor and immobilized $TiO_2/UV$ System. The 20 W UV-A, UV-B and UV-C lamps were employed as the light source. The effect of shape and surface polishing extent of reflector, distance between the reactor and reflector, reactor material were investigated. The results showed that the order of the initial reaction constant with reflector shape was round > polygon > W > rhombus. The optimum distance between the reactor and reflector was 2 cm. The initial reaction constant of quartz reactor was 1.46 times higher than that of tile PVDF reactor.

• 한국전산구조공학회논문집
• /
• 제16권1호
• /
• pp.87-94
• /
• 2003

연속적으로 이루어지는 제작ㆍ조립 단계에서 변위하중을 받는 CRTS 반사판의 초기 정적평형상태론 결정하기 위하여 변위증분법을 사용하여 기하학적 비선형 유한요소 해석기법을 제시하고 반사반의 이상적인 형상파 실 제자 형상과의 차이, 즉 형상오차에 케이블 및 구조적 인자가 미치는 영향에 관한 연구를 수행한다. 본 연구 결과는 Galerkin method 와 NASS 98 Program을 사용하여 해석한 결과와 비교ㆍ검증하여 그 타당성을 입증한다.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.36-47
• /
• 1995

The main purpose of this paper is to determine a new focal point and field distribution due to the shape deformation of reflector antenna by numerical method such as geometrical optics and the aperture field method. It is shown the 4 types deformations to be added into original shape of parabola antenna and offset antenna: linear, quadratic, cubic and hybrid distortion. These results can be applied to deformed reflector antenna in order to fit a focal point and radiation pattern.

• 조명전기설비학회논문지
• /
• 제25권1호
• /
• pp.9-17
• /
• 2011

Development of high efficiency and eco-friendly LED source has been progressed continuously. Also, by nation's regulations, public institutions have changed existing luminaires to LED luminaires. However, there are several differences between existing luminaires and the intensity distribution of general planar LED luminaires. In case of changing existing luminaires to LED luminaires, by such differences, there are inefficiencies both quality aspect and energy aspect in luminous environment. Therefore, this study aims to conduct a study on the changes of intensity distribution and luminous environment by reflector shapes in indirect reflected LED luminaires with software for optical design of a luminaire (Photopia 2.0) and lighting design of a space (ReluxPro). This study shows the changes of intensity distribution and luminous environment of indirect reflected LED luminaires and indirect fluorescent lamp luminaires by reflector shapes.

• 한국환경보건학회지
• /
• 제32권4호
• /
• pp.373-380
• /
• 2006

The photocatalytic reactor using immobilized $TiO_2$ on silicone sealant was studied bench scale using solar light as the source of radiation. The influences of parameters such as shape, polishing extent and size of reflector, distance between reactor and reflector, an angle of inclination between reactor system and ground, were studies using Rhodamine B (RhB) as a model compound. respectively. The decolorization of round type among the reflector shapes was higher than that of the polygon and W type. The polishing extent of the reflector did not show the decolorization largely. The optimum size of reflector and distance between reactor and reflector were 38 cm and 6 cm, respectively.

• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.185-192
• /
• 2017

In this paper, we reviewed major design parameters for a solid type of deployable antenna and its structural design. We performed modal analysis for a single reflector panel made of aluminum and CFRP (carbon fiber reinforced plastic) to confirm the appropriateness of selected materials. We then predicted the elastic modulus of CFRP using the principles of unidirectional composite elasticity stiffness predictions such as the ROM (Rule of Mixture) and HSR (Hart Smith 10% Rule). To optimize the shape of the antenna reflector, a structural stiffness analysis was performed using derived numerical optimization factors. Six structural stiffness analyses were performed using the constructed experimental design method. The resulting optimal shape conditions are proposed to meet the structural stiffness requirements while minimizing weight.

• 한국항행학회논문지
• /
• 제21권5호
• /
• pp.466-471
• /
• 2017

SOTM(satellite communication on the move)는 이동 중 위성통신을 하기 위한 장치이다. 차량이나 무인항공기 외부에 장착하는 물체의 크기 및 중량 제한으로 SOTM 용 안테나의 소형화가 필요하며, 이를 위하여 마이크로스트립, 도파관, 어레이 안테나 등 다양한 형태의 안테나에 대한 연구가 진행되고 있다. 이러한 안테나들은 구조적으로 편파 조정이 어렵다는 문제점이 있어 본 논문에서는 파라볼라 안테나 형태를 사용하여 연구를 진행하였으며, 안테나의 소형화를 위하여 일반적인 원형 형태의 파라볼라 안테나의 반사면을 상하로 잘라 크기 및 높이를 감소시켰다. 그로 인하여 입사된 전자파를 받아들일 수 있는 반사면의 면적이 줄어들어 이득의 저하 및 Spill-over로 인한 G/T지수의 감소로 수신안테나의 성능이 저하하게 되며, 이러한 문제점을 해결하기 위하여 본 논문에서는 부 반사면의 형태를 변형하여 안테나의 면적대비 효율 및 이득을 향상시킬 수 있는 형태로 설계하였다.