• Journal of the Korean Institute of Educational Facilities
• /
• v.3 no.1
• /
• pp.53-58
• /
• 1996

The purpose of this study was to obtain a new guideline on designing the visual environment in the classrooms of elementary schools. This study was carried out through the field measurements on the classrooms and a survey using the questionnaire about the visual environment for learning. The major findings of the study were as follows: (1) It was unbalanced among the illumination, luminance, and color distributions in the classrooms. (2) It was too bright or dark around the surrounding surfaces (walls, floors, and ceilings) of students in the classrooms. Therefore, it is needed to be careful attention on the light distribution and the reflection ratio around the surrounding surfaces of students in the classrooms.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.5
• /
• pp.590-595
• /
• 2003

In this paper, we propose a new method to the speed control of soccer robot using messy Genetic Algorithm(mGA). In order to arrive in the target of the soccer robot within the smallest time ,we propose the speed control function with several parameters which represent the reflection ratio distance and angle error. Also, we propose the algorithm for searching these parameters by using messy Genetic Algorithm. As a result of finding the optimal parameters, we can move the robot the most quickly in the target under the complex environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.21-26
• /
• 1999

Using daylight in underground spoce may significantly reduce electric lighting load and give a visually comfortable environment. This reper describes a fundaIrentaI study on light duct system to predict inter illuminance ratio on underground periIreter occupied zone level. As a result, integral equation for inter-reflection program are developed and by using optimize light duct system can gives daylight on deep underground space. space.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.8
• /
• pp.401-406
• /
• 2004

In this experimentation, we investigated the characteristics of electromagnetic wave absorption of ferroxplana powder and silicone rubber composite. Ferroxplana was prepared by flux method at low temperature. The crystallization, magnetic properties and particle morphology of the obtained ferroxplana powder were investigated by using XRD, VSM and SEM. The particle size of ferroxplana powder was 2∼4$\mu\textrm{m}$ at the ratio of R=26, The coercivity and saturation magnetization of ferroxplana powder increased slightly with increase of temperature, The magnetic loss was the main factor of electromagnetic wave absorption of ferroxplana powder and silicone rubber composite, The maximum reflection loss of composite was about -l5dB below 4GHz.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.90-93
• /
• 1987

Phase conjugate wavefront generation via real-time holography in degenerate four-wave mixing experiments in photo-refractive crystal $Bi_{12}$ Si $O_{20}$ is presented. Depending on the respective values of applied field $E_o$ and fringe spacing, drift or diffusion of the photecarriers dominates the space-charge buildup and affects the Phasa- Conjugate Wavefront intensity. The experimental results for wavefront reflectivity as a function of the intensity ratio of the writing beams agree with the theoretical predictions.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.7-10
• /
• 2002

A novel two-phase PIV algorithm using a single camera has been proposed, which introduces a method of image-separation into respective phase images, and is applied to freely rising single bubble. Gas bubble, tracer particle and background each have different gray intensity ranges on the same image frame when reflection and dispersion in the phase interface are intrinsically eliminated by optical filters and fluorescent material. Further, the signals of the two phases do not interfere with each other. Gas phase velocities are obtained from the separated bubble image by applying the two-frame PTV. On the other hand, liquid phase velocities are obtained from the tracer particle image by applying the cross-correlation algorithm. Moreover, in order to increase the SNR (signal-to-noise ratio) of the cross-correlation of tracer particle image, image enhancement is employed.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.556-560
• /
• 1995

The absorption properties of Cu-Zn ferrite/rubber composite microwave absorbers with PZT(Lead Zirconate Titanate) additive were evaluated. The composite specimens have prepared by molding and curing the mixture of matrix rubber and Cu-Zn ferrite powders which are synthesized by the coprecipitation method using Fe Cl/sub 3/ .center dot. 6H/sub 2/O, CuCl/sub 2/ .center dot. 2H/sub 2/O and Zn Cl/sub 2/ as a starting raw materials. PZT is used as another filler particles to adjust the material constants of Cu-Zn ferrite/rubber composite specimens. We have found that the material constants of specimens could be controlled by various PZT mixing ratio. On the Cu-Zn ferrite/rubber composite specimens with PZT 10[wt%] additive, the reflection losses were larger than 30[dB] in the frequency range from 2.72 to 4.4[GHz]' by adjusing the thickness.

• Journal of the Optical Society of Korea
• /
• v.14 no.1
• /
• pp.38-41
• /
• 2010

We design and fabricate a widely tunable laser diode made of InGaAsP-InP. The diode is monolithically integrated with a wavelength-selective coupled-ring reflector and semiconductor amplifiers. For realization of a compact size device, deeply etched multi-mode interference couplers and square ring resonators composed of total-internal-reflection mirrors are adopted and fabricated using a self-aligned process. It is demonstrated that the laser diode exhibits single mode operation and 16 nm tuning range with side-mode-suppression-ratio exceeding 20 dB.

• Structural Engineering and Mechanics
• /
• v.83 no.3
• /
• pp.377-386
• /
• 2022

This paper considers dynamic impedance functions and presents a detailed analysis of the soil plasticity influence on the pile-group foundation dynamic response. A three-dimensional finite element model is proposed, and a calculation method considering the time domain is detailed for the nonlinear dynamic impedance functions. The soil mass is modeled as continuum elastoplastic solid using the Mohr-Coulomb shear failure criterion. The piles are modeled as continuum solids and the slab as a structural plate-type element. Quiet boundaries are implemented to avoid wave reflection on the boundaries. The model and method of analysis are validated by comparison with those published on literature. Numerical results are presented in terms of horizontal and vertical nonlinear dynamic impedances as a function of the shear soil parameters (cohesion and internal friction angle), pile spacing ratio and frequencies of the dynamic signal.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.399-403
• /
• 1993

Si(111)7 $\times$ 7 위에 Mg를 흡착시켜 표면구조의 변화를 RHEED(Reflection High Energy Electron diffraction) 와 XPS(X-ray PhotoelectronSpectroscopy)를 이용하여 연구하였다. RT ~20$0^{\circ}C$까지의 기판온도에서 증착량의 증가에 따라 표면구조는 (7$\times$7)에서 diffused (1$\times$1) 그리고 (2 3 3 $\times$2√3√3-R30$^{\circ}$) 구조로 변화하였다. 또한, 기판온도를 증가시킴에 따라 (1$\times$1), three domain(3$\times$1) 등의 구조를 볼 수 있었고, 특히 , $450^{\circ}C$의 기판온도에서는 single domain (3$\times$1) 구조를 최초로 관측하였다. 이렇게 형성된 각 구조에 대한 Mg KLL과 Si2p의 XPS peak intensity ratio를 증착량의 증가에 따라 측정하여 각기 다른 온도에서의 Mg 성장에 대한 메카니즘을 제시하였다.