• Geomechanics and Engineering
• /
• v.18 no.6
• /
• pp.605-614
• /
• 2019

The present paper seeks to investigate propagation and reflection of waves at free surfaces of homogeneous, anisotropic and rotating micropolar fibre-reinforced medium with voids. It has been observed that, in particular when P-wave is incident on the free surface, there exist four coupled reflected plane waves traveling in the medium; quasi-longitudinal displacement (qLD) wave, quasi-transverse displacement (qTD) wave, quasi-transverse microrotational wave and a wave due to voids. Normal mode Analysis usually called harmonic solution method is adopted in concomitant with Snell's laws and appropriate boundary conditions in determination of solution to the micropolar fibre reinforced modelled problem. Amplitude ratios which correspond to reflected waves in vertical and horizontal components are presented analytically. Also, the Reflection Coefficients are presented using numerical simulated results in graphical form for a particular chosen material by the help of Mathematica software. We observed that the micropolar fibre-reinforced, voids and rotational parameters have various degrees of effects to the modulation, propagation and reflection of waves in the medium. The study would have impact to micropolar fibre-reinforecd rotational-acoustic machination fields and future works about behavior of seismic waves.

• ETRI Journal
• /
• v.24 no.5
• /
• pp.341-348
• /
• 2002

We propose an asymmetric sampled grating laser and a multi-wavelength laser array associated with it. Asymmetric sampling periods combined with an index shifter make it possible to use first order reflection for lasing operations. With the structure of our design, we achieved a simple fabrication procedure as well as a high yield without using complex and time-consuming e-beam lithography for multi-period gratings. We analyzed the effect of mirror coating by numerical analysis to improve single mode and power extraction performance. By using high reflection-antireflection coatings, we obtained high power extraction efficiency without degradation of the single mode property. For the multi-wavelength laser array, to gain wavelength control, we varied the sampling periods from one laser to an adjacent laser across the array. With this approach, we showed the feasibility of an array of up to 30 channels with 100 GHz wavelength spacing.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.2
• /
• pp.54-63
• /
• 1981

An ultrasonic imaging system with fan reflection mode time of fight is developed and its performance has been examined by system implementation. Experimental results obtained indicafe potential of the method for tomographic imaging. The basic concept of this method is reconstruction of reflectivity with reflection data collected in fan mode using a new "arbitrary ray" reconstruction algorithm. Computer simulations as well as experimental results are presented.presented.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.3
• /
• pp.75-80
• /
• 2001

Holographic polymer dispersed liquid crystals (HPDLCs) have fabricated by irradiating an Ar-ion laser ( ${\lambda}$=514nm) at various intensity on LC/acrylate monomer mixtures which were sandwitched between two ITO coated glass plates. Monomer systems were composed of dipentaerythritol-hydroxy penta acrylate (DPHPA, f=5)/monofunctional acrylate monofunctional monomers. The LC used in this system was E7 (BL001, Merck). Gratings were fabricated by periodic interference of twobeams. Reflection efficiency-irradiation intensity-monomer type relationships were obtained from the UV-visible spectra of the HPDLC films. Peaks were found at a bit smaller wavelength than 514nm, due to the shrinkage of mixture volume upon polymerization. Real time measurements of diffraction efficiency have been obtained according to monomer types and LC contents.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.23-28
• /
• 1998

A linearly-chirped fiber grating for the dispersion compensation over 520km of 1.3.mu.m single mode fiber is designed. The compensation characteristics of the gratings apodized each with Gaussian and hyperbolic tangent function are studied. the ripples in reflection and delay curves are coniderably reduced for both cases, but the reflection bandwidth for the hyperbolic tangent apodization is much less shrinked than that of the Gaussian apodization.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.394-402
• /
• 2009

To investigate the heavy-weight impact noise of apartment houses, numerical analysis was performed. The analysis acoustic pressure consider acoustic mode by finite element method. The variables considered effecting on the acoustic pressure are the Acoustic mode, acoustic damping, and the impulse load. The heavy-weight impact noise is a changeable value in the room. Since the most part of the frequency component of heavy-weight impact noise has low frequency. The noise in low frequency is related to the vibration of structure, the reflection of acoustic wave caused by wall and the standing wave called by acoustic mode. The prediction by the numerical analysis was verified with test result of the heavy weight-impact noise at apartment houses.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.3
• /
• pp.23-30
• /
• 1987

In this paper, the characteristic response of reflected signals of acoustic reflection microscope, V(z) phenomenon, has been studied and a new type of NDE technique has been presented. 10 Won coin, aluminium, IC component, and kevlar-epoxy samples have been used for the experiment of NDE and the acoustic microscope operating at a center frequency of 3 MHz has been used in the focused or defocused mode of operation. In experiment, it has been shown that the acoustic microscope has the resolution of $500\mu m$ and the defects present on the surface and near surface of samples have been detected by acoustic transducer and imaged on a monitor, and the variation of the contrast of image for samples has been in good agreement with V(z) phenomenon.

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.675-683
• /
• 1999

The reflection coefficients of monochromatic waves propagating over a shelf with varying dimensions are theoretically calculated. The diffraction of waves by an abrupt depth change is formulated by the eigenfunction expansion method. Not only propagating mode but also evanescent modes are considered in formulation. The role of evanescent modes in reflection coefficients is investigated in detail. Water waves are obliquely as well as normally incident to the region. The obtained reflection coefficients are verified by checking conservation of wave energy.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.2
• /
• pp.175-178
• /
• 2011

An optical fiber-based beam width measurement technique is presented. The proposed system can be applied to the optical fiber industry in applications such as lensed fiber, optical fiber based laser beam source, and fiber optic sensor. The measurement system is composed of optical fiber, which is used as a transceiver, and a single grating panel which consists of a multi-reflection area with an even non-reflection area. The grating panel is used to vary the reflected light. When the widths of the reflection area and non-reflection area are larger than the optical beam width, the reflected light is varied at the interface between the reflection area and the non-reflection area by the movement of the grating panel. Experiments were conducted in order to verify the feasibility of the proposed technique. Multi-mode fiber combined with a collimator was selected as an emitter and a receiver, and the beam width measurement system was contrived. Subsequently, the proposed method and the system were verified by comparing the experimental results with the results of the conventional charge-coupled device technique.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.261-265
• /
• 2005

In this paper, we constructed the infrastructure with wireless LAN and Access Point in the indoor environment and implemented the teleoperation. Wireless LAN based teleoperation system is irregular communication delay according to environment condition and occurrence possibility of blackout is very high. In this paper, In case these problem happened, we measured communication delay time by real time, and did mobile robot to control harmoniously through vision and force reflection information. Also, we present obstacle-avoidance mode that mobile robot can travel without collision using direction information in case communication delay time is large. We proved usefulness of presented algorithm through teleoperation experiment to apply presented algorithm.