• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.438-444
• /
• 2003

A method using beamforming algorithm has been developed to measure oblique incidence reflection coefficients of sound absorption materials. MUSIC(multiple signal classification) method detects the angles of incidence and reflection. By separating the incident and reflected waves using beamforming method, the reflection coefficient is calculated. Spatial smoothing technique Is also used to reduce the coherence between the incident and reflected waves. Numerical and experiment results are performed to verify the accuracy of proposed method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1005-1008
• /
• 2007

A semi-anechoic termination is necessary in the muffler transmission loss test rig in order to suppress the sound reflection effects in the downstream. The reflected sound can distort the measured transmission loss curves. However, there exists only general guide about how to manufacture a semi-anechoic termination. In this study, Taguchi's method was used to design a semi-anechoic termination more efficiently.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.211-217
• /
• 2010

This paper introduces the Hull Mounted Sonar Vertical Scanning(HMS Verscan) technique to overcome the limitation of target detection in short range shadow zone. Numerical experiments were done with the HMS Verscan taking advantage of the vertical beamforming technique for two-dimension hydrospace(range-depth). For numerical experiments, ray model and high-frequency monostatic reverberation model were used. HMS Verscan increased a sound pressure level at the short range shadow zone through reflections at the sea surface and seafloor. Inclusion of the boundary scattering improved target detection due to the sound reflected into the shadow zone.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.237-243
• /
• 1997

Most outdoor sounds go from sources relatively near the ground to receivers near the ground. When either source or receiver are near the ground, interference can occur between the direct sound and that reflected at the ground which travels a slightly longer path. The sound pressure at the receiver is very different depending on the state of ground surface i.e. ground impedance. Ground impedances could be characterized by the value of a single parameter, namely the flow resistivity of the ground surface. This study suggests the measurement method of the flow resistivity using two microphones and predicts the flow resistivities of various ground surfaces.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.349-354
• /
• 2005

There are various types of noise around us such as road traffic noise, aircraft noise and floor impact sound, equipment noise etc. Recently researches on the criteria to evaluate the noises have been progressed, however, researches on the noise criteria and evaluation method for the diffuser noise of HVAC are insufficient. dB(A) and NC values represented in ASHRAE guide book are applied as a noise criteria for diffuser noise, which have some problems like that the values between dB(A) and NC have deviation even if the sound is same one. Therefore, the evaluation method should be considered and proposed based on the subjective responses. From these reasons, this study aimed to analyze the evaluation factors for the diffuser noise of HVAC reflected on the subjective responses by surveying vocabularies and grouping them with factor analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1280-1286
• /
• 2001

This paper presents some advanced and supplemental methods to enhance the accuracy in case of calculating geometric divergence attenuation, attenuation by multiple screening structures, ground attenuation at unflat surfaces of sound during propagation outdoors by the methods specified in ISO 9613-2. Moreover, a calculation method for considering short-term wind effect, specified in ASJ Model-1998, is also introduced. To verify the accuracy of adopted methods, we have carried out highway traffic noise prediction and measurement at the twelve locations appearing representative road shapes and structures, such as flat, retained cut, elevated, barrier-constructed roads. From the results, we have confirmed the predicted results show good correspondence with the measured at direct, diffracted and reflected sound fields within 30m from the center of near side lane.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.802-805
• /
• 2004

It is requures to understand the meaning of sound and cultural background of target spaces for soundscape design. The purpose of this study is to derive the general soundscape preserved in the mind of Korean people. Four kinds of traditional Korean songs, that is to say, Sijo (Korean verse), folk-song, Pansori (song for drama by Chang reciter), and popular songs, were used as tools of research subjects. That is because the sounds expressed in literature are very useful subjects for soundscape survey. Paragraphs containing description of sounds were selected from the lyrics of the songs. Then 11 sound categories were named, and 13 meaning categories were classified according to referential and emotional aspects, respectively.

• 한국환경교육학회지:환경교육
• /
• 제16권2호
• /
• pp.65-73
• /
• 2003

This study has an aim to construct a reference frame to analyze the appropriateness of environmental education(EE) materials of elementary schools, and to search the basic direction of the scheme for analysis. In addition, this study has an aim to induce what the results of this analysis suggests for the development and reconstruction of EE materials. It was analyzed how truly EE materials reflected contents selected as an analysis scheme, after grasping practical use and features of textbooks, audio-visual materials, and a web-site that are typical materials in EE of elementary schools. The results in textbook analysis were that there were a human-centered environmentalism in the EE unit ("Environmentally Sound National Development", 5th Grade) of Social Studies. The result in analysis of audio-visual materials "Environmental Warrior, Zentaforce" of EBS, were that there are unhealthy environmentalism in that material. In other words, technology itself is considered as a almighty means to solve environmental problems. Finally, the result in web-site analysis were that the "Environmental Class" of Ministry of Environment did not have sound environmentalism. The above result of study shows us that the most important thing in developing and using the environmental education materials is to have sound environmental values and EE perspective, to evaluate EE material with various point of view, to judge its result, and to use it.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.394-400
• /
• 2018

Various numerical methods have been adopted for indoor noise assessments of ship plant. Acoustical radiosity method is one of the high frequency approaches for acoustic field analysis, which assumes diffuse reflections by boundaries so that it could be efficiently applied to the acoustically diffused indoor space noise analysis. In this study, an acoustic field analysis program has been developed based on radiosity method, which could apply for acoustically large enclosures such as ship's indoor space. For this purpose, the procedure of the acoustical radiosity method has been summarized and implemented to an acoustic field analysis program using MATLAB. Numerical example for a rectangular indoor space has investigated validity of the implemented program. Steady state sound pressure levels calculated for a continuous acoustic source signal have shown good agreement with those by other solutions such as an analytic solution and a ray tracing method. Instantaneous sound pressure levels calculated for an impulsive acoustic signal have provided the clues of direct/reflected acoustic field and reverberation time.

• 한국터널지하공간학회 논문집
• /
• 제19권1호
• /
• pp.1-9
• /
• 2017

본 연구에서는 터널 내 콘크리트 도상을 모사하여 현장실험을 수행하였다 그리고 도시철도터널 내 콘크리트도상의 반사소음을 저감하기 위한 다중국소공명 흡음판의 이론적 평가항목과 한계를 고려하여 허용한계를 연구하였다. 본 연구결과는 도시철도 터널 구간에서의 차량 주행속도에 따른 유동 영향에 의한 흡음판의 흡음계수를 분석하고, 구조안정성을 효율적으로 평가할 수 있는 최대 변위와 변위가 속도 및 동적특성인 감쇠비와 고유진동수를 효과적으로 도출할 수 있는 계측시스템을 제안한다.