• Journal of Environmental Policy
• /
• v.14 no.2
• /
• pp.133-148
• /
• 2015

The number of used oil refining companies has been increased and it causes shortage of the volume of used oil per recycling company. In addition, the number of used oil collecting companies has been increased and it caused excessive competition among companies with excessive costs. Companies use not only proper used oil but also low quality used oil because of shortage of supply. It is the reason of environmental pollution. Also excessive competition brings high cost of refined oil and it becomes a burden on the consumer. Therefore, the recycling improvement plans of used oil is needed because of these causes. First of all, importing used oil from the developed countries of OECD is the one of solution to secure a used oil supply. However, imported used oil should meet the international quality standards and it is examined twice by international authority institute such as K-petro in both exporting and importing countries. Second, the cost would be reduced with the relaxation on regulations of used oil refinement. However, regulation to sediment and water should be separated. Sediment should be kept within 2% and water should be kept within 5%. It is the way to relax the regulations of used oil refinement with preventing environmental pollutions. Finally, the standard of used oil for heater should be regulated strictly. To prevent pollutions, used oil for heater is limited to high quality waste lubricating oil. Also the air pollution prevention device has to be installed on heater.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.135-146
• /
• 2016

Three fiber sources including Russian spruce (Picea jezoensis) and larix (Larix leptolepis), and Myanmar bamboo (Phyllostachys bambusoides) for thermomechanical pulp were explored to replace domestic pine (Pinus densiflora) pulp that has some limitations in an aspect of supply and pitch trouble. Thermomechanical pulps were manufactured under the identical condition, and then compared with their representative pulp properties and pulping process. Both Russian larix and Myanmar bamboo contained large amounts of extractives that would negatively affect mechanical pulping processes. Russian spruce showed the least contents in shives and pitch. Russian spruce and domestic pine reached an optimum freeness level within a short pulp processing time, which consumed less amount of refining energy compared to larix and bamboo. In particular, the spruce wood showed the highest brightness level which might lead to a less consumption of bleaching chemicals. It was expected that Russian spruce could be replaced with the domestic pine wood in respect of both pulping process and pulp quality.

• Journal of Information Technology Applications and Management
• /
• v.15 no.4
• /
• pp.159-188
• /
• 2008

This study suggests strategies which can enable to creation of new opportunities of competitive advantages while operating a long lasting and consistent business with major trading partners, based on interorganizational information systems (IOISs) specially established and installed for interorganizational transactions. Nowadays, IOISs based mechanism having been widely expanded as a conventional business infrastructure for the interorganizational transactions and/or exchanges, it is customary difficult to obtain any strongly sound advantage over the competitors who have adopted even the simplest deployment of the IOIS mechanisms. In this connection, this study intends to investigate the interorganizational collaborative activities conducted by under the auspicious of IOISs, focused on the prospect of the exploitation of IOISs rather than the implementation of the IOISs. In this study, we, firstly, suggest the concept of Electronic Collaboration which can be defined by the collaborative activities conducted by IOISs, compared to the ones conducted on off-line. In addition, we suggest the Electronic Collaboration as a multi-dimensional concept, constituted by three sub-constructs, the Electronic Information Sharing (EIS), the Electronic Joint Activity (EJA), and the construction of the Electronic Relational Knowledge Store (ERKS). Secondly, we empirically verify the effects of relational and environmental determinants on the Electronic Collaboration. In this study, the relational determinants relate to the variables created in interorganizational relationship like Trust, Influence, Relational Specific Asset-asset invested for the transaction-, and Continuity of the relationship. On the other hand, the environmental determinants relate to the variables surrounding the relationship which are difficult to control. We consider Product Complexity, Technological Uncertainty, and Market Variability as the domain of the environmental determinants. To test our hypotheses, we conducted both paper-based survey and online-based survey. After refining the data with missing responses, a total of 150 data was used for analysis. The results were as follows : Firstly, it is statistically significant that the Electronic Collaboration is composed of EIS, EJA, and ERKS. In particular, the results imply that the firms are able to accumulate relational knowledge base as well as to exchange information or knowledge, and to conduct joint activities through effort to further expand the Electronic Collaboration. Secondly, we have verified the individual effects of the relational and the environmental determinants on the Electronic Collaboration. Product Complexity has been revealed as the most influential variable affecting the Electronic Collaboration. Next, Interorganizational Trust and Technological Uncertainty, in that order, have been seen to have significant effects on the Electronic Collaboration. In other words, when products or services seem to be difficult to standardize, and the core technologies seem to rapidly change, the need for the Electronic Collaboration increase. In addition, the observation dictates that the interorganizational trust turns out to be a critical variable in building a relationship and in seeking further collaboration. The results, further, illustrate that the environmental determinants are relatively more effective than the relational determinants, which is not consistent with a few prior researches relational determinants emphasized. It is because this study doesn't consider the size of the firm. A few researchers have given an emphasis on the relational determinants like trust and influence, especially from the perspective of small firms in interorganizational relationship. However, in our study, where all the sizes of the firms are contained, electronic collaboration is considerably affected by the environmental determinants.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.305-312
• /
• 2017

To evaluate the reliability of fly ash quality supplied to ready-mixed concrete plant using mass cylinder and hydrometer, in this research, the correlationship between the fly ash properties provided from certification and density measurement with suspension was evaluated. As a result, the reliability of the certification, except fineness and loss on ignition, all properties had a discord. Additionally, in the case of density, fineness, and L.O.I, the relation with the density measured using hydrometer showed high correlation, especially fineness was strongly related with the density measured using hydrometer. Furthermore, according to the comparative analysis with previous research, the fly ash used in this research was similar measurement with raw powder without any refining process, it is considered that the constant error of blaine test or using raw ash sample as a fly ash. In current standard regarding fly ash, the fineness range of class 2 can be changed from $3,000-4,500cm^2/g$ to $3,500-4,500cm^2/g$ for improved quality of fly ash in fineness aspect.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.213-221
• /
• 2014

Since 2005, when "The Mobility Enhancement for the Mobility Impaired Act" was enacted, special transport systems(SPS) has been introduced by each responsible local entity. For its efficient operations and service enhancements, a clear understanding of travel patterns of SPS users is required. Yet we currently have a very limited understanding about them due to a lack of necessary data. This study represents an attempt to provide a better understanding of SPS user's travel patterns with the data generated by Gyeongsangnam-do SPS Call Center. The data include the number, time and day of calls, origins and destinations of callers, types of callers' impairement etc. The data thus allow one to analyze users' travel patterns, including area-wide O-D patterns. There were a number of interesting findings. For example, wheelchair users are only about 42% and the trips are made mostly on non-peak daytime periods. The results are expected to provide a helpful information not just for Center's SPS operations, but for other local entities that are interested in developing similar call centers as well. By refining the SPS system, periodic patterns of callers could be identified in the future.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.3
• /
• pp.160-166
• /
• 2001

The change of ribbon geometry, microstructure and shape recovery with Mn contents, wheel speed and various annealing temperature have been studied in Fe-X%Mn-5Cr-5Co-4Si (X%=15, 20, 24) shape memory alloy (SMA) ribbons rapidly solidfied by single roll chill-block melt-spinning process. The thickness and width of melt-spun ribbons are reduced, results in refining and uniformalizing grains with increasing wheel speed. In the ribbons melt-spun at a wheel speed of 15m/sec, both ${\varepsilon}$ and ${\alpha}^{\prime}$martensites are formed in ribbon 1 (15.5wt%Mn), while only ${\varepsilon}$ martensite is revealed in ribbon 2 (20.2wt%Mn) and ribbon 3 (23.5wt%Mn). The volume fraction of ${\varepsilon}$ martensite is decreased with increasing Mn contents, and those of ${\varepsilon}$ as well ${\alpha}^{\prime}$martensites are increased due to thermal stress relief and grain growth with increasing annealing temperature. Ms temperatures of the ribbons 1, 2 and 3 are fallen with increasing Mn contents. $M_s$ temperatures of the ribbons 1, 2 and 3 annealed at $300^{\circ}C$ for 3 min are risen abruptly, but are nearly constant even at higher annealing temperature, i.e., 400, 500 and $600^{\circ}C$ for 3 min. Shape recovery of the ribbons 1, 2 and 3 increased 30%, 52% and 69% with Mn contents, respectively. Shape recovery of ribbon 1 (15.5wt%Mn) formed ${\varepsilon}$ and ${\alpha}^{\prime}$martensites decreased because of the presence of ${\alpha}^{\prime}$martensite but those of ribbon 2 (20.2wt%Mn) and ribbon 3 (23.5wt%Mn) formed ${\varepsilon}$ martensite increased with increasing annealing temperature.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.467-472
• /
• 2017

In this study, the reforming reaction of vacuum residue (VR) was carried out using aquathermolysis reaction. VR showed a prone to decrease the amount of resins and asphaltenes in the constituents, and to increase saturates and aromatics when reacting with steam at 30 bar and above $300^{\circ}C$ for 24 h. This tendency became more evident when the amount of steam used was excessive than the amount of VR. When the aquathermolysis reaction was performed at $300^{\circ}C$ and 30 bar for 48 h, the VR composition was changed from the initial state (S/A/R/A = 7.3%/43.7%/25.6%/23.5%) to final state (S/A/R/A = 6.8%/57%/12.2%/24.0%), and the contents of the resins decreased by 13% and the aromatic compounds increased by 13%. The viscosity decreased from 880,000 cp to 290,000 cp by 68%. When 10% of decalin, which is easy to provide hydrogen, was added, the viscosity decreased by 68% in 24 h. The VR composition showed a reduction in the contents of resins and asphaltenes from 49% to 17% from the initial state (S/A/R/A = 7.3%/43.7%/25.6%/23.5%) to the final state (S/A/R/A = 4.5%/63.5%/12.5%/20.0%), and the content of aromatics was maximized to 63.5%. The gas layer formed by the aquathermolysis reaction in the reactor chamber was collected and analyzed by GC-MS spectroscopy. As a result, various hydrocarbon compounds such as ethylbenzene, octane and dimethylbenzene were detected.

• Radiation Oncology Journal
• /
• v.35 no.3
• /
• pp.233-240
• /
• 2017

Purpose: To validate the 8th edition of the American Joint Committee on Cancer/Union for International Cancer Control (AJCC/UICC) TNM staging system for human papillomavirus (HPV)-related oropharyngeal squamous cell carcinoma (OPSCC) and investigate whether a modified classification better reflects the prognosis. Materials and Methods: Medical records of patients diagnosed with non-metastatic HPV-related OPSCC between 2010 and 2016 at a single institution were retrospectively reviewed. HPV status was determined by immunohistochemical analysis of p16 and/or HPV DNA polymerase chain reaction (PCR). We reclassified TNM stage T0-1 and N0-1 as group A, T2-3 or N2 as B, and T4 or N3 as C. Survival analysis according to 8th AJCC/UICC TNM staging and the modified classification was performed. Results: Of 383 OPSCC patients, 211 were positive for HPV DNA PCR or p16. After exclusion, 184 patients were included in this analysis. Median age was 56 years (range, 31 to 81 years). Most primary tumors were in the palatine tonsil (148 tumors, 80%). The eighth AJCC/UICC TNM classification could not differentiate between stage I and II (p = 0.470) or II and III (p = 0.209). Applying modified grouping, the 3-year overall survival rate of group A was significantly higher than that of group B and C (98% vs. 91%, p = 0.039 and 98% vs. 78%, p < 0.001, respectively). Differentiation between group B and C was marginally significant (p = 0.053). Conclusion: The 8th AJCC/UICC TNM staging system did not clearly distinguish the prognosis of stage II from that of other stages. Including the T2N0-1 group in stage II may improve prognostic stratification.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.77-84
• /
• 2005

The steel slag, a by-product which is produced by refining pig iron during the manufacture of steel, is mainly used as road materials after aging. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the expansion of volume. This problem prevents steel slag from being used as aggregate for concrete. However, steel slag used in this study was controled by a air-jet method which rapidly cools substance melted at a high temperature. The rapidly-chilled method would prevent from generation of free-CaO in steel slag. This study dealt with the influence of the using rate of rapidly-chilled steel slag on flow, dosage of SP, W/C ratio, and strength of mortar by statistical experimental design. Also, the results of this experiment were approved by statistical analysis methods, such as analysis of variance and F-testing. As results of F-testing, this paper proved at $1\%$ level of significance that the more the using rate of rapidly-chilled steel slag increased, the more this affected the enhancement of flow, the decrease of dosage of SP and W/C ratio, and the development of compressive strength. Also, considering the fluidity and compressive strength of mortar, it is desirable to use $75\%$ of rapidly-chilled steel slag for river sand.

• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.71-80
• /
• 2001

Blood and urine mercury level of three workers were monitored during 60~80 days after high exposure to mercury at the silver refining plant. Mercury was used to form silver-mercury amalgam from plating sludge. Workers were exposed to mercury about 70 days at the several processes, such as hand held weaving, vibration table, and heating from the furnace. mercury was analysed by atomic absorption spectroscopy-vapor generation technique. Recovery from the biological sample was 95.51% and pooled standard deviation was 0.033. At the time of study, there was no work at the workplace. So, airborne mercury concentration was measured with area sampling 5 days after the work, ranged from 0.1459 to 1.2351 mg/㎥(Arithmatic mean 0.4711 mg/㎥, Geometric mean 0.3566 mg/㎥) at the inside of the plant, that is far above the ACGIH's TLV(0.025 mg/㎥) and ranged from 0.0073 to 0.0330 mg/㎥ at the outdoor. Blood mercury levels at the beginning of the monitoring were 4~14 times greater than the American Conference of Governmental Industrial Hygienists Biological Exposure Index(ACGIH BEI, 15 ug/L). Blood mercury levels were decreased logarithmically, that is, rapidly at the high level and slowly at the low level but sustained above the level of the ACGIH BEI 60~80 days after the work. Urine mercury levels at the beginning of the monitoring were 8~16 times greater than the ACGIH BEI(35 ug/g creatinine). Urine mercury levels were decreased logarithmically, but correlation between urine level and off-days were lower than those of blood. Decreasing pattern of blood mercury levels were little affected than that of urine levels when the chelating agent, D-penicillamine, was administered. There was correlation between blood mercury level and urine mercury level(0.81~0.83) but it didn\`t mean that the highest blood mercury level corresponded the highest urine mercury level. In our study, Case 1 always shows the highest level in urine but case 3 always shows the highest level in blood. Creatinine correction represented better correlations between urine mercury levels and blood levels, and between urine levels and off-days rather than by urine volume. Spot urine sampling had a wide variation than that of whole day urine sampling. So, We recommend spot urine sampling for screening and whole day urine sampling for exact diagnosis.