• 기술사
• /
• 제10권3호
• /
• pp.17-26
• /
• 1977

In order to obtain the most practical and economically efficient method for refining of kenaf fiber and the production possibility of bag dproucts by using kenaf, Various chemicals and conditions of treatment for refining of kenaf bark were examined. Refining by the retting method was found much beneficial in quality of fiber and in processing cost than the chemical mettled. Bag products by using kenaf bark has good quality , and for practical use, Even if the production cost is slightly more expensive than jute bag, it could be reduced by planned mass production.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2001년도 추계학술발표논문집
• /
• pp.183-199
• /
• 2001

Alternative way of shaping fibers suitable for papermaking was introduced. Impact refining, which was done simply by hitting wet fibers with a metal weight vertically, was intended to keep the fibers from shortening and to cause mostly internal fibrillation. Virgin chemical pulp, its recycled one and OCC were used in the experiment. It was noticed from the experiment that impact refining on virgin chemical pulp kept the fiber length and Increased bonding properties greatly, However, in the recycled fibers from the chemical pulp, fiber length and bonding properties were decreased. In OCC, which seems to contain fractions of semi-chemical pulp and mechanical pulp (GP), and which is recycled pulp from corrugated boxes, fiber length and bonding properties were decreased disastrously. We believe recycled cellulosic fibers (recycled chemical pulp and OCC in this case), which went through hornification, were less resistant to the mechanical impact than virgin chemical pulp. For virgin chemical pulp, impact refining allowed no significant fiber length shortening, high WRV, and high mechanical strength.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.60-67
• /
• 1999

The CLSM and the image analysis technique enhanced observation of fiber wall fibrillation occurred in both the outer and the fiber wall surfaces during refining by non-destructive techniques. In the early stages of refining, it was well observed that a partial separation between the S1 and S2 layer in the secondary wall was made generating a space in the wet fiber walls . With further refining, it was clearly shown that the shear forces imparted by the refiner bar surfaces caused the S1 layer to become totally separated from the S2 layer as well as creating microfibrils. Furthermore, the fibrillation in the inner fiber wall surfaces could be due to the normal force (Fn) by refiner bars, friction force between a fiber and refiner bars (Fs) and inner friction force between fiber walls(fs). It was confirmed that the concept of fibrillation should be extended to fibrillation in the inner fiber wall surfaces as well as internal and external fribrillation.

• 펄프종이기술
• /
• 제35권3호
• /
• pp.29-36
• /
• 2003

Reducing the energy consumption while maintaining pulp quality is an important objective of today's paper industry. Enzymatic treatment of fibers and the application of dry strength agent were investigated as methods to reduce energy consumption during refining and to upgrade fiber characteristics. Modification of recycled fibers with an enzyme was effective in improving relining efficiency and reducing refining energy. Optimization of dry strength agent application conditions including stock pH, cationic demand, zeta potential, etc. were found to be very important for improving its effectiveness.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.141-146
• /
• 2006

Mechanical fibres are commonly characterized by measuring their length distribution and freeness. These parameters, however, do not adequately characterize the influence of refining on their mechanical properties. In this work we conducted multiple compression on fibre mats prepared from different length fractions (Bauer McNet fractions) to generate stress-strain curves from which several quality parameters can be derived such as modulus, stress and toughness. We found that these characteristics of fibre are strongly influenced by the refining energy used to produce pulp; fibres of similar length exhibit different mechanical properties depending on the refining energy6 consumption.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.10-16
• /
• 2004

Structures and strengths of paper have been studied by analyzing fibers characteristics depending on refining methods. Mixing ratio of softwood and hardwood fibers and fibers characteristics have been analyzed for paper quality improvement. In this study flocculation and drainage of fibers were analyzed to improve the production efficiency and paper product's quality. Floc size and drainage rate depending on stock consistency and fines content were analyzed. Total amount of drainage during drainage process was measured quantitatively by using DI(drainage index). Floc size, viscosity of floc and dewatering times were also measured. In the case of refining load $2.8 kg_f$ , drainage was occurred by filtration mechanism rather than thickening mechanism because drainage resistance increased by fibrillation of fibers. Therefore, the drainage rate of $2.8 kg_f$ refining load stock was slower than that of $5.6 kg_f$.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.8-13
• /
• 2000

X-ray diffraction technique was used to quantify change of cellulose crystallinity during refining. XRD data confirmed that fiber wall delamination was caused by the structural conversion of celluloses which occurred in a liquid medium during refining. The quantified crystallinity of celluloses in pulp fibers was closely associated with the change of fiber wall delamination, which was defined by measurement of fiber wall thickness. In particular, it was well recognized that low intensity beating showed a better response in the change of crystallinity than high intensity one. The decrease o cellulose crystallinity during refining considerably enhanced the improvement of interfiber bonding ability of a dried sheet.

• 열처리공학회지
• /
• 제22권4호
• /
• pp.234-242
• /
• 2009

• 펄프종이기술
• /
• 제43권5호
• /
• pp.17-26
• /
• 2011

Drying behavior and physical properties of HwBKP, SwBKP, and OCC handsheets depending on kneading, refining and wet pressing were analyzed. The maximum drying shrinkage velocity was newly adopted to verify the effect of mechanical treatment of pulps by evaluating drying behavior according to varying the kneading, refining and wet pressing treatments. Those various treatments were changed to evaluate the relationship between the maximum drying shrinkage velocity and handsheets properties. When the drying shrinkage and the maximum drying velocity increased by refining and wet-pressing, handsheets strength was increased. The maximum drying shrinkage velocity showed higher correlation with physical properties of paper than WRV at different refining loads at SwBKP and mixed pulp. At high wet-web dryness, drying shrinkage, the maximum drying shrinkage velocity and strength properties of handsheet were increased. It meant that drying shrinkage behavior was highly affected by not only fibers' shrinkage but also fiber bonding. Kneading pre-treatment for KOCC and SwBKP effectively modified fiber properties and increasing paper strength and drying shrinkage. The effect of kneading pre-treatment was also confirmed by the maximum drying shrinkage velocity. Strength properties of mixed pulp handsheets were not increased by the kneading pre-treatment, although the maximum drying shrinkage velocity and WRV was increased. It meant that fibers network bonding of HwBKP was limited because of ves sels and ray cells' interference for bonding. Therefore in order to improve paper strengths containing HwBKP by mechanical treatments, interference of vessels and ray cells for fiber bondings should be carefully controlled.

• Applied Biological Chemistry
• /
• 제36권4호
• /
• pp.284-289
• /
• 1993

탈검, 탈산, 탈색과 탈취 등의 정제과정이 $70^{\circ}C$에 저장하는 동안 참기름의 유지 특성과 산화안정성에 미치는 효과에 대하여 시험하였다. 정제과정을 거친 후 참기름의 색도(L, a, b)는 크게 변하여 엷어졌다. 지방산 조성, 굴절율, 요오드가와 conjugated dienoic acid의 변화는 없었고, 산가와 과산화물가는 감소하였다. $70^{\circ}C$에서 저장동안 탈산, 탈색과 탈취기름은 갈변화 반응이 급격히 이루어져 L값이 크게 감소하고 a값은 크게 증가하였다. 조유와 탈검시료는 색도가 안정하고, 과산화물가, 유리지방산과 conjugated dienoic acid 함량은 서서히 증가한 반면, 탈산, 탈색 및 탈취등의 정제과정을 거친 시료들은 저장초기에 이들의 값이 급격히 증가하였다. 저장 중 산화가 진행되면서 산패취에 관여하는 몇 개의 peak가 생성되고 양이 증가하는 것을 볼 수 있었는데 탈색과 탈취시료는 이들 peak의 증가가 저장초기에 매우 현저하였으나 조유와 탈검시료는 이들 peak의 변화가 거의 없었다.