• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.331-336
• /
• 2011

The flow fields over multi-element airfoils with lift-enhancing flat-plate tabs were numerically investigated. Common choice of the height of the lift-enhancing tabs usually ranges from 0.25% to 1.25% of the reference airfoil chord, and in this study the effect of the position of the tab with l%-chord height was studied by varying the distance of the tab from the trailing edge ranging from 0.5% to 2% of the reference chord. In this paper, the effects of lift-enhancing tabs with various position were studied at a constant Reynolds number on a two-element airfoil with a slotted flap. Computed streamlines show that the additional turning caused by the tab reduces the amount of separated flow on the flap.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.87-93
• /
• 1997

Radiometers in UV and visible wavelengths were onboard the Korean Sounding Rocket(KSR)-1 and 2 which were launched on June 4th and September 1st, 1993. These radiometers were designed to capture the solar radiation during the ascending period of the rocket flight. The purpose of the instrument was to measure the vertical profiles of stratospheric ozone densities. Since the instrument measured the solar radiation from the ground to its apogee, it is possible to investigate the altitude variation of the measured intensity and to estimate the effect of atmospheric scattering by comparing the UV and visible intensity. The visible channel was a reference because the 450-nm wavelength is in the atmospheric window region, where the solar radiation is transmitted through the atmosphere without being absorbed by other atmospheric gases. The use of 450-nm channel intensity as a reference should be limited to the altitude ranges above the certain altitudes, say 20 to 25km where the signals are not perturbed by atmospheric scattering effects.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.430-437
• /
• 2018

Ultrasonic attenuation is an important parameter in Quantitative Ultrasound and many algorithms have been proposed to improve estimation accuracy and repeatability for multiple independent estimates. In this work, we propose an improved algorithm for estimating ultrasonic attenuation utilizing the optimal frequency compounding technique based on stochastic noise model. We formulate mathematical compounding equations in the AWGN channel model and solve optimization problems to maximize the signal-to-noise ratio for multiple frequency components. Individual estimates are calculated by the reference phantom method which provides very stable results in uniformly attenuating regions. We also propose the guideline to select frequency ranges of reflected RF signals. Simulation results using numerical phantoms show that the proposed optimal frequency compounding method provides improved accuracy while minimizing estimation bias. The estimation variance is reduced by only 16% for the un-compounding case, whereas it is reduced by 68% for the uniformly compounding case. The frequency range corresponding to the half-power for reflected signals also provides robust and efficient estimation performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.101-107
• /
• 2000

A design of the global optimal sliding mode control is presented to control the second order uncertain time varying system with torque limit. With specified ranges of parametric uncertainties and torque limit, the minimum arrival time to reference inputs can be calculated. The proposed control scheme is applied to the motor system carrying loads. The merit of the proposed control scheme is that the arriving time at the reference input, which is the revolution angle, and the maximum allowable acceleration are expressed in a closed form solution. The superior performance of the proposed control scheme is validated by the computer simulation and experiments comparing with other sliding mode controllers.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2066-2073
• /
• 2021

The use of nuclear reactors is a large studied possible solution for thermochemical water splitting cycles. Nevertheless, there are several problems that have to be solved. One of them is to increase the efficiency of the cycles. Hence, in this paper, a thermal energy optimization of a Sulfur-Iodine nuclear hydrogen production cycle was performed by means a heuristic method with the aim of minimizing the energy targets of the heat exchanger network at different minimum temperature differences. With this method, four different heat exchanger networks are proposed. A reduction of the energy requirements for cooling ranges between 58.9-59.8% and 52.6-53.3% heating, compared to the reference design with no heat exchanger network. With this reduction, the thermal efficiency of the cycle increased in about 10% in average compared to the reference efficiency. This improves the use of thermal energy of the cycle.

• Journal of the Korean Vacuum Society
• /
• v.22 no.5
• /
• pp.231-237
• /
• 2013

New method of volume measurement for reference weights of a pressure balance using a gas pycnometer is proposed. The result of volume measurement of proposed method shows the uncertainties of approximately 0.2% at the level of confidence of 95% for reference weights in the ranges of 1 kg, 2 kg, and 5 kg. This measuring system consists of a sample chamber, an expansion chamber, a precision pressure gage, a precison thermometer, a vacuum pump, and helium as a medium gas. The measurement principle of this proposed method is based on Boyle's law. This method will contribute a reliability of the volume measurements of reference weights for a pressure balance to the national measurement standard.

• Annals of Clinical Neurophysiology
• /
• v.19 no.2
• /
• pp.131-135
• /
• 2017

Background: Neuromuscular ultrasound can be used to assess the diaphragm. Before it can be used clinically, the reference ranges of diaphragm thickness and contractility must be determined. Methods: We measured the thickness of the diaphragm and the diaphragmatic thickening fraction (DTF) in 80 healthy volunteers with ultrasound and collected their demographic information to determine if age, sex, and body mass index (BMI) influence these measures. Results: The thickness of the diaphragm at resting end expiration was $0.193{\pm}0.044cm$ on the right side and $0.187{\pm}0.039cm$ on the left. The DTF was $104.8{\pm}50.6%$ on the right side and $114.9{\pm}49.2%$ on the left. Sex, weight, height, and BMI significantly affected the thickness of the diaphragm, but had little effect on the DTF. Conclusions: Normal reference values for the diaphragm should be helpful when evaluating the diaphragm. The DTF appears more useful than resting diaphragm thickness because it is affected less by individual variation.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.10
• /
• pp.1499-1512
• /
• 2006

Based on the first 2D reference map of the fission yeast Schizosaccharomyces pombe protein reported previously, we expanded and updated the map using narrower pI ranges. In this paper, 240 protein spots were identified on our reference map. In the pI 4-7 range, 144 spots corresponding to 86 different proteins were identified. In the pI 6-9 range, 43 spots corresponding to 35 different proteins were identified. Fifty-three new spots corresponding to 39 different proteins were further identified in the pI 5-6 range.

• Psychiatry investigation
• /
• v.15 no.12
• /
• pp.1130-1134
• /
• 2018

Objective Trichotillomania is a relatively common illness whose neurobiology is poorly understood. One treatment for adult trichotillomania, n-acetyl cysteine (NAC), has antioxidative properties, as well as effects on central glutamatergic transmission. Preclinical models suggest that excessive oxidative stress may be involved in its pathophysiology. Methods Adults with trichotillomania provided a blood sample for analysis of compounds that may be influenced by oxidative stress [glutathione, angiotensin II, ferritin, iron, glucose, insulin and insulin growth factor 1 (IGF1), and hepcidin]. Participants were examined on symptom severity, disability, and impulsivity. The number of participants with out-of-reference range oxidative stress measures were compared against the null distribution. Correlations between oxidative stress markers and clinical measures were examined. Results Of 14 participants (mean age 31.2 years; 92.9% female), 35.7% (n=5) had total glutathione levels below the reference range (p=0.041). Other oxidative stress measures did not have significant proportions outside the reference ranges. Lower levels of glutathione correlated significantly with higher motor impulsiveness (Barratt Impulsiveness Scale sub-score) (r=0.97, p=0.001). Conclusion A third of patients with trichotillomania had low levels of glutathione, and lower levels of glutathione correlated significantly with higher motor impulsiveness. Because NAC is a precursor for cysteine, and cysteine is a rate limiting step for glutathione production, these results may shed light on the mechanisms through which NAC can have beneficial effects for impulsive symptoms. Confirmation of these results requires a suitable larger follow-up study, including an internal normative control group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.516-530
• /
• 1999

The current clinical technique for occlusal vertical dimension recording is based on marking the skin reference points on the patient's face and measuring between these points using caliper-like device. And it is difficult to achieve reliable measurements by this technique because of movable soft tissue. The purpose of this study is to reveal the stability of skin reference points by comparing the relative movement between extra-oral skin reference points and intra-oral reference points using X-ray fluoroscope. 10 test subjects were divided into 2 groups : Group I (natural dentition) and Group II (denture-wearer whose vertical dimension was lost) and Group III consists of identical test subjects to Group II with their upper denture removed and record base inserted. Attaching the 3 mm diameter steel ball to nose tip, lower lip, chin and to existing denture (or record base), fluoroscopic examination and recording were taken during 2 jaw opening and closing movements. After subsequent digitization using personal computer, 1219 still pictures with 0.1 second interval were made. Using the 2 dimensional graphic software, measurements between reference points were executed. Dividing the entire jaw movement into 3 ranges (total, 1st half opening, 2nd half opening), rate of movement and relative movement between extra-oral and intra-oral reference points were calculated and statistically analyzed. The results of this study are as follows. 1 Within the same experimental group, no statistical difference was found in the stability of skin reference between lower lip point and chin point during total range of jaw opening and closing movement (p>.05) 2. In the first half range of jaw opening, statistical difference was found between Group I (natural dentition) and Group II (denture wearer) (p<.05) Group I has greater skin reference stability than Group II. 3. In the first half range of jaw opening, statistical difference was found between Group I and Group III (record base wearer) (p<.05). Group I has greater skin reference stability than Group III. 4. In the first half range of jaw opening, no statistical difference was found in the stability of skin reference between Group II and Group III (p>.05). 5. In the second half range of jaw opening, no statistical difference was found in the stability of skin reference between any experimental groups (p>.05). 6. In patients with their occlusal vertical dimension lost, employing other measuring references rather than skin is recommended because of low stability.