• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8C
• /
• pp.651-660
• /
• 2010

In this paper, we implement an efficient histogram-based prefiltering to compensate the illumination mismatches in regions between neighboring views. In multi-view video, such illumination disharmony can primarily occur on account of different camera location and orientation and an imperfect camera calibration. This discrepancy can cause the performance decrease of multi-view video coding(MVC) algorithm. A histogram matching algorithm can be exploited to make up for these differences in a prefiltering step. Once all camera frames of a multi-view sequence are adjusted to a predefined reference through the histogram matching, the coding efficiency of MVC is improved. However general frames of multi-view video sequence are composed of several regions with different color composition and their histogram distribution which are mutually independent of each other. In addition, the location and depth of these objects from sequeuces captured from different cameras can be different with different frames. Thus we propose a new algorithm which classify a image into several subpartitions by its depth information first and then histogram matching is performed for each region individually. Experimental results show that the compression ratio for the proposed algorithm is improved comparing with the conventional image-based algorithms.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2015

This paper introduces the development of imaging luminance meter which measures the luminances of external/internal road tunnel. The developed imaging luminance meter complies with both L20 method and Veiling luminance method of the international standards, CIE88. In this paper the L20 method is mainly presented because most of tunnels currently adapt L20 method. The developed system has an embedded computer to operate at stand-alone. The system has a ethernet port, a heater, a fan, a defroster, a wiper and sun shielder. Compensation algorithm is applied for correcting non-linear responses to the luminance and integration time. The accuracy of measurement is less than 1% when it calibrated at the public certification institute. The developed system was also tested at the real field, road tunnel. The test results were very similar with the reference luminance meter and showed that the developed system operates well at the real field. Partial sensor saturations were happened to show the less luminance, because there were the high reflecting objects in the real field. Further study should be followed for high luminance measurement.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.705-714
• /
• 2019

Precision positioning is necessary for various use of high-resolution UAV images. Basically, GCP is used for this purpose, but in case of emergency situations or difficulty in selecting GCPs, the data shall be obtained without GCPs. This study proposed a method of improving positional accuracy for x, y coordinate of UAV based 3 dimensional point cloud data generated without GCPs. Road vector file by the public data (Open Data Portal) was used as reference data for improving location accuracy. The geometric correction of the 2 dimensional ortho-mosaic image was first performed and the transform matrix produced in this process was adopted to apply to the 3 dimensional point cloud data. The straight distance difference of 34.54 m before the correction was reduced to 1.21 m after the correction. By confirming that it is possible to improve the location accuracy of UAV images acquired without GCPs, it is expected to expand the scope of use of 3 dimensional spatial objects generated from point cloud by enabling connection and compatibility with other spatial information data.

• Journal of Convergence for Information Technology
• /
• v.8 no.3
• /
• pp.153-160
• /
• 2018

This article examines actions of the department of a university according to Higher Education Evaluation Policy as a case on the department of Christian education of A University. This article consists of background and policy Higher Education Evaluation and actions of the department of Christian education. Specialization, curriculum, management of instructional quality, educational achievement, student support and cooperation of local community as category of trends of the department of Christian education are discussed. Aim of education, model of human resource, educational objects, and key-competency as the specialization of department of Christian education are discussed. Curriculum of department suggests students career track which is related to their career. Positive guidance counseling are implemented for rate of recruit related to educational achievement. Non-subject matter program of University and Department are introduced for students's support. 60 hours of educational service and other educational activities are carried out for local community. Principal, chaplain of school and teachers are invited for educational practical affairs of education. The result of this article can be used as a basic reference for the direction of the higher education.

• The Korean Journal of Archival Studies
• /
• no.13
• /
• pp.41-90
• /
• 2006

It's needed for the archivists to design a flexible and stable ERMS(Electronic Records Management System) which can ingest and store records through a consistent way and let users search and use records easily what they want. The basis of the design for ERMS are the conceptual composition and the logical and physical structure of the records when they are stored and managed in the ERMS. This paper explains the process of defining components and designing structure of electronic records using 3-layered approaches which consist of conceptual, logical and physical layer and shows advantages of this approaches. After benchmarking the information models of OAIS which is a reference model for the long-term preservation of digital information objects, this paper applies the model of AIP to a record as a 'Record AIP' and discusses the composition and structure of it. It's a critical task to identify mandatory or optional metadata groups which consists of the 'Record AIP's in the conceptual layer. This paper emphases that the metadata group related to services for the record information to users is required as a result of benchmarking OAIS information models. Various issues about the structure of 'Record AIP's are discussed according to the kind of preservation strategy such as migration or emulation and whether the encapsulation of records is required or not in the logical layer.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.3
• /
• pp.629-643
• /
• 2019

In the era of the 4th industrial revolution, countries around the world are conducting projects to rapidly expand smart factory to secure competitiveness in manufacturing industries. However, unlike existing factories where the network environment was closed, smart factories can be vulnerable because internal and external objects are interconnected and various ICT technologies are used. And smart factories are likely to be the subject of cyber-attacks that are designed to cause monetary damage to certain targets because economic damage is so serious when an accident occurs. Therefore, it is necessary to study and apply security for smart factories, but there is no specific smart factory system architecture, so there is no establish for smart factory security requirements. In order to solve these problems, this paper derives the smart factory architecture that can extract and reflect the main characteristics of a smart factory based on the domestic and foreign reference model of smart factories. And this paper identifies the security threats based on the derived smart factory architecture and present the security requirements to cope with them for contributing to the improvement of the security of the smart factory.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.212-223
• /
• 2012

Pigments used paintings, ornaments, weapons and various objects have been recognised as important elements to ascertain the history, manufacturing technique and cultural migration. Since the understanding of composition of pigments by analysis began in 1963, its technique and methodology has much advanced in recent years; recent study used the portable X-ray Fluorescence as non-destructive analysis has been practiced in particular. However the study on pigments necessitates overall and systematic research because it is difficult to understand periodical and regional use of pigments. by fractional studies. Therefore this research investigates the coloring materials and painting techniques of the scroll painting depicting preaching scene of Sakyamuni Buddha in Daeungjeon Hall, a main hall of Bulguk temple, through scientific analysis and comparison of various pigments which had been applied to the buddhist paintings of Joseon Dynasty. Consequently, it is confirmed that the scroll painting used pigments of white lead[$2PbCO_3{\cdot}Pb(OH)_2$] for ground layer and used mixture of different pigments such as cinnabar (HgS) minium($Pb_3O_4$) malachite($2CuO{\cdot}CO_2{\cdot}H_2O$) hematite($Fe_2O_3$) gold(Ag) for presenting various colors on the painting layer. It has been also believed that mineral pigments were applied to the scroll painting, yet it is difficult to confirm whether it is natural or synthetic pigments because the crystal structures of pigments were not analyzed. The results of this study, however, provide useful reference data for the understanding of the components of pigments and manufacturing techniques of buddhist scroll paintings, in particular, of Joseon Dynasty.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.73-82
• /
• 2021

According to the government's announcement of the safety management enhancement policy for small and medium-sized private construction sites, the subject of mandatory CCTV installation has been expanded from large construction sites to small and medium-sized construction sites. However, since the existing CCTV at construction sites has been used for simple control for safety management, so research is needed for monitoring of construction sites. Therefore, in this study, three vanishing points were calculated based on a single image taken with a monocular camera, and then a camera matrix containing interior orientation parameters information was determined. And the accuracy was verified by calculating the height of the target object from the height of the reference object. Through height determination experiments using vanishing points based on a monocular camera, it was possible to determine the height of target objects only with a single image without separately surveying of ground control points. As a result of the accuracy evaluation, the root mean square error was ±0.161m. Therefore, it is determined that the progress of construction work at the construction sites can be monitored through the single image taken using the single camera.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.2
• /
• pp.355-375
• /
• 2022

This study is to grasp LRM's feature and applications plan to reflect LRM to cataloging related standards and individual system through comparing and analyzing LRM with the FR model in terms of entities, attributes, and relationships. The application plan is suggested as follows. First, the entity can be extended by defining sub-entities of each entity in the standards and the individual system in order to reflect LRM, even though entities such as families, groups, identifiers, authorized access points, concepts, objects, events, agency and rules have been deleted in LRM. Second, the attribute should be subdivided in the standards and the individual system in order to apply LRM, though many attributes have been changed to relationships for linked data and decreased in LRM. In particular, more specific and detailed property names in the standards and the individual system should be clearly presented, and the vocabulary encoding scheme corresponding to each property should be also developed, since properties with similar functions or repetition in various entities, and material specific properties are generalized and integrated into comprehensive property names. Third, the relationship should be extended through newly declaring the refinement or subtype of the relationship and considering a multi-level relationship, since the relationship itself is general and abstract under increasing the number of relationships in comparing to the property. This study will be practically utilized in cataloging related standards and individual system for applying LRM.

• Science of Emotion and Sensibility
• /
• v.25 no.2
• /
• pp.23-30
• /
• 2022

The weight of an object is an important research topic in terms of sense, and objects have size-weight, color-weight, and material-weight illusions due to the influence of size, color, and material and the weight of the object. Although temperature is a very important environmental factor in our daily life, there is a dearth of studies on how the temperature of an object affects its perceived weight. This study analyzed the effect of an object's temperature on the perceived weight. A stainless steel cup, in which weight and temperature are easily adjustable, was selected as a perceived weight measurement object; 5 temperature levels (0, 9, 20, 40, 70 degrees) and 2 weight levels (250, 400 g) were set. A total of 40 healthy men and women in their 20s participated in the experiment. The weight of the given cup compared to the reference cup was evaluated according to the modulus method. The study revealed that both temperature and weight significantly affected the perceived weight. The effect of temperature on the weight was different depending on the weight of the object. When the cup's weight was small (250 g), the temperature of the cup did not affect the weight. However, the perceived weight of a large cup (400 g) increased at a low temperature. This result suggests that the effect of temperature on the weight of an object depends on the size-weight illusion.