• 분석과학
• /
• 제34권5호
• /
• pp.202-211
• /
• 2021

Volatile organic compounds (VOCs) in hazardous air pollutants (HAPs) have been regulated by the Air Pollution Control Act (1978) and their atmospheric concentrations have been monitored in 39 monitor sites in Korea. However, measurement standards of volatile organic compounds (VOCs) in HAPs at ambient levels have not been established in Korea. Primary reference gas mixtures (measurement standards) at ambient levels are required for accurately monitoring atmospheric VOCs in HAPs and managing their emissions. In this study, primary reference gas mixtures (PRMs) at 5 nmol/mol were developed in order to establish primary national standards of VOCs in HAPs at ambient levels. Primary reference gas mixtures (PRMs) were prepared in pressurized aluminum cylinders with special internal surface treatment using gravimetric method. Analytical methods using gas chromatography-flame ionization detector (GC-FID) coupled with a cryogenic preconcentrator were also developed to verify the consistency of gravimetrically prepared HAP VOCs PRMs. Three different columns installed in the GC-FID were evaluated and compared for the retention times and separation of eighteen target components in a chromatogram. Results show that the HAP VOCs PRMs at 5 nmol/mol were consistent within a relative expanded uncertainty (k=2) of less than 3 % except acrylonitrile (less than 6 %) and the 18 VOCs were stable for 1 year within their associated uncertainties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.130-132
• /
• 2005

This paper presents two ART-based neural networks for the identification of gas mixtures subject to the drift. A fuzzy ARTMAP neural network is used for classifying $H_2S$, $NH_3$ and their mixture gases including a reference gas. The other fuzzy ART neural network is utilized to detect the drift of a tin oxide gas sensor by tracking a cluster center of the reference gas. After detecting the drift, the previous cluster center of each gas is updated as much as the drift of the reference gas. By the simulations, the proposed method is shown to compensate the drift on-line without making many categories of target gases compared with the previous studies.

• 한국진공학회지
• /
• 제22권5호
• /
• pp.231-237
• /
• 2013

본 연구에서는 분동식 기준압력계의 기준분동(reference weight)의 부피를 측정하는 새로운 측정방법인 기체용적계(gas pycnometer) 측정방법을 제안하였다. 제안된 측정방법에 의한 측정결과로서 기준분동 1 kg, 2 kg, 5 kg에 대한 부피 측정불확도는 신뢰수준 95%에서 0.2%를 나타내었다. 기체용적계의 주요 장치는 샘플용기와 팽창용기, 정밀압력계, 정밀온도계, 진공펌프로 구성되며, 측정 원리는 일정한 용기 내에 들어 있는 일정한 양의 기체의 압력과 부피는 서로 반비례한다는 보일(boyle's law)의 법칙을 용용하였다. 본 결과는 현재까지 문헌이나 제조사로부터 기준분동 재질에 대한 밀도값을 적용하여 오던 것을 기준분동의 부피를 직접 측정하여 밀도값을 적용함으로서 압력기준기의 압력 기준값에 대한 국가측정표준의 신뢰도 향상에 기여될 것이다.

• 한국연소학회지
• /
• 제18권3호
• /
• pp.54-60
• /
• 2013

This paper shows a general development process for aircraft gas turbine combustors. As a first step for developing the preliminary combustor design program, several combustor sizing methodologies using reference area concepts are reviewed. There are three ways to determine the reference area; 1) combustion efficiency approach, 2) pressure loss approach, 3) velocity assumption approach. The current study shows the comparisons of the calculated results of combustor reference values from the pressure loss and velocity assumption approaches. Further works are required to add iterative steps in the program using more reasonable values of pressure loss and velocities, and to evaluate the sizing results using data for actual combustor performance and sizes.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.177-180
• /
• 2006

This study is to make a basic study if solid zinc (Zn) can be used for buried reference electrode, so we examined the adequacy of zinc as reference electrode by using zinc which showed regular electrode for buried period. The deference of electric potential if zinc electrode for corrosion factor such as soil resistivity or pH didn't show fixed trend and there was no clear trend on the change of measurement period. From field test, it is known that the natural electric potential difference of CSE electrode and zinc electrode is 1,100mV, but the electric potential of zinc electrode for CSE electrode in the natural soil and copying soil was 1,094~1,158mV. There was no fixed trend on the change of measurement period and electric potential difference of zinc electrode for corrosion factors such as soil resistivity or pH. Consequently, there was 40~60mV of electric potential difference in every copying soil during the experiment measurement.

• 한국가스학회지
• /
• 제20권4호
• /
• pp.50-57
• /
• 2016

도시가스사업법령에서는 매설된 강관에는 부식을 방지하기 위하여 전기방식 조치를 하도록 하고 있다. 미국 등 국외에서 방식전위기준은 방식전류가 흐르는 상태에서 포화황산동 기준전극으로 -850 mV(On potential) 이하로 하도록 하고 있으며, 이 경우 전압강하(IR-Drop)를 고려하도록 하고 있다. 그러나, 국내의 방식전위 기준은 포화황산동 기준전극으로 -850mV 이하로 하도록 규정하고 있을 뿐, 전압강하를 고려하도록 규정하고 있지 않다. 다만, KGS GC202에서 가스시설에 대한 전위측정은 가능한 한 가스시설과 가까운 위치에서 기준전극으로 실시하도록 하고 있다. 본 연구에서는 기준전극을 매설배관 주위, 지표면 및 지표면 하부 50cm에 각각 설치하여 방식전위를 측정하고, 측정위치에 따른 전위값을 비교하여 전압강하를 분석하였다. 전위 측정결과 기준전극을 매설배관 가까이에 위치하였을 때 IR-Drop이 가장 적고, 지표면에 기준전극을 위치할 때 IR-Drop 값이 가장 큼을 확인하였다. 따라서, 고체기준전극을 매설하는 경우에는 가능한 한 매설배관 가까이에 설치할 것을 제안하였다. 또한, 기존에 설치된 배관의 원격전위 측정을 위해서는 기존에 설치된 전위측정용터미널(T/B) 하부에 고체기준전극을 매설할 수 있도록 전기방식 기준전극 설치 기준 개정(안)을 제시하였다.

• 분석과학
• /
• 제33권2호
• /
• pp.68-75
• /
• 2020

We have developed 10 μmol/mol nitrogen and oxygen certified reference materials (CRMs) in helium, as a SI-traceable gas standard for a quantifying of impurities in pure gases for the first time in Korea. The standard gas mixtures of nitrogen and oxygen were prepared in 5000 μmol/mol and sequentially were diluted to 250 μmol/mol and 10 μmol/mol according to the gravimetric preparation. In each dilution step, two cylinders of CRMs were prepared. The verification of internal consistency among the prepared gas mixtures was performed by using GC-TCD. The amount fractions and those expanded uncertainties (k = 2) of nitrogen and oxygen in the standard gas mixtures were (10.12 ± 0.08) μmol/mol and (10.18 ± 0.08) μmol/mol for nitrogen, and (9.88 ± 0.06) μmol/mol and (9.94 ± 0.06) μmol/mol for oxygen, respectively. We have conducted a purity assessment of two commercial helium gases using developed CRMs. As the results of the purity assessment, nitrogen and oxygen were detected by (1.66 ± 0.03) μmol/mol and (0.31 ± 0.02) μmol/mol, respectively, as the impurities in one of the pure helium.

• 한국기후변화학회지
• /
• 제4권3호
• /
• pp.211-219
• /
• 2013

장기에너지 분석모형인 LEAP 모형을 활용하여 S시 가정 부문의 에너지 소비량 및 온실가스 배출 현황과 온실가스 저감대책에 따른 감축잠재량을 분석하였다. 2009년 S시의 에너지 소비량은 가정 상업부문에서 39.1%로 가장 많이 소비하고 있다. 또한, 가구수 증가로 인해 가정 부문의 에너지 및 온실가스 배출량이 증가할 것으로 전망되고 있어, 가정 부문의 온실가스 저감대책 마련이 시급한 상황이다. 이에 본 연구에서는 S시 가정 부문의 에너지 소비량을 파악하고, S시에 적합한 가정 부문 온실가스 저감대책을 수립하였다. 온실가스 감축 잠재량 예측을 위한 시나리오는 기준시나리오, LED 조명 보급, 에너지 대체, 녹색생활 실천, 통합 저감대책 등 총 5개 대책의 효과를 분석하였다. 2020년 기준 저감대책별 온실가스 배출량을 살펴보면, LED 조명 보급은 2020년 온실가스 배출량이 1,181.0천 $tonCO_2eq$로 기준시나리오 대비 약 6.1%의 감축효과가 나타났으며, 에너지 대체는 1,171.6천 $tonCO_2eq$으로 기준시나리오 대비 약 6.8%의 감축효과가 나타났다. 또한, 녹색생활 실천의 2020년 온실가스 배출량은 1,128.7천 $tonCO_2eq$로 기준시나리오 대비 약 10.2%의 온실가스 배출량을 줄일 수 있다는 결과를 도출할 수 있다. LED 조명 보급, 에너지 대체, 녹색생활 실천을 모두 통합한 통합 저감대책은 2020년 966.9천 $tonCO_2eq$로 기준시나리오 대비 약 23.1%의 온실가스 배출량을 줄일 수 있다는 것으로 나타났다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.90-96
• /
• 1999

In contracts for sales of natural gas between sellers and buyers, it is not suncient to only measure a volumetric quantity of gas in flowing conditions in metering station. Therefore the measured volumetric quantity must be converted to that of reference conditions. The density of the natural gas required in such a calculation can be measured directly or estimated from the equation of sate or any other experimental methods. The specific gravity meter is the apparatus used to measure the density of fluids under the reference conditions and it can be widely used in industrial areas, especially in massive flow rate natural gas industry. This study has been carried out in an attempt to improve measurement accuracy of natural gas flow rate calculation, providing the adequate installation and proper operation conditions of specific gravity meter. The test results are 1) the density measurement errors in case of using methane and standard gas as calibration gases are smaller than using methane and nitrogen gas, 2) the periodical calibration to maintain accurate density measurements is essential, and 3) the specific gravity meter is sensitive to changes of environmental conditions, especially environmental temperature surrounding the specific gravity meter.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.912-917
• /
• 2007

Many electrochemical power devices such as solid state batteries and solid oxide fuel cell have been studied and developed for solving energy and environmental problems. An amperometric gas sensor usually generates sensing signal of electric current along the proportion of the concentration of target gas under the condition of limiting current. For narrow variations of gas concentration, the amperometric gas sensor can show higher precision than a potentiometric gas sensor does. In additional, cross sensitivities to interfering gases can possibly be mitigated by choosing applied voltage and electrode materials properly. In order to improve the sensitivity to $NO_2$, the device was attached with Au reference electrode to form the amperometric gas sensor device with three electrodes. With the fixed bias voltage being applied between the sensing and counter electrodes, the current between the sensing and reference electrodes was measured as a sensing signal. The response to $NO_2$ gas was obviously enhanced and suppressed with a positive bias, respectively, while the reverse current occurred with a negative bias. The way to enhance the sensitivity of $NO_2$ gas sensor was thus realized. It was shown that the response to $NO_2$ gas could be enhanced sensitivity by changing the bias voltage.