• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.427-434
• /
• 2016

This paper focuses on a real-time hardware processing by implementing the ARM Cortex-M4 based embedded system, using a conversion algorithm from a muscular sense to both visual and auditory elements, which recognizes rotations of a human body, directional changes and motion amounts out of human senses. As an input method of muscular sense, AHRS(Attitude Heading Reference System) was used to acquire roll, pitch and yaw values in real time. These three input values were converted into three elements of HSI color model such as intensity, hue and saturation, respectively. Final color signals were acquired by converting HSI into RGB color model. In addition, Three input values of muscular sense were converted into three elements of sound such as octave, scale and velocity, which were synthesized to give an output sound using MIDI(Musical Instrument Digital Interface). The analysis results of both output color and sound signals revealed that input signals of muscular sense were correctly converted into both color and sound in real time by the proposed conversion method.

• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.116-125
• /
• 2018

Color shade variation was investigated in zirconia dental blocks, prepared using commercial powders. As a reference color-shade block we used the color indexes of A2, A3.5, A4 and B3, according to the VITA classical color scale. The zirconia powders for color shade blocks showed colors of white, yellow, pink and grey, respectively, after firing at $1530^{\circ}C$. The zirconia powders were mixed according to the recipe of color shade blocks and shaped at lower pressure using a uniaxial hydrostatic press. The shaped sample was inserted into a vinyl pack and sealed in a vacuum form machine. The shaped block samples were reshaped at 450 bar using an isostatic cold press and fired at $1530^{\circ}C$ for three hours. In order to investigate the atmospheric color variation with firing temperature, the A2, A3.5, A4 and B3 sintered blocks were fired between $700^{\circ}C$ and $1300^{\circ}C$ under controlled atmosphere of $pN_2$ and $pO_2$. The surface color picture was taken using a smart phone camera and compared with the results obtained using the VITA classical color scale. Quantitative color index value, CIELAB, was measured using a color-meter. Above $800^{\circ}C$, the color darkness greatly increased with the increase of the reduction temperature and keeping time.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.73-76
• /
• 2001

A segmentation is a prior processing for medical image analysis and 3D reconstruction. This Paper provides the method to segment 3D Visible Human color images. Firstly, the reference images that have a initial curve are segmented using Balloon and the results are propagated to the adjacent images. In the propagation processing, the result of the adjacent slice is modified by Edge-limited SRG Finally, the 3D Balloon improves the segmentation results of each 2D slice. the proposed method's performance was verified through the experiments to segment thigh muscles of Visible Human color images.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.85-88
• /
• 2005

A low-cost and high-speed PDP color inspection system can be constructed by using a CCD camera against a colorimeter. Though the inspection can be done using RGB signals obtained by a camera, it has some difficulty to introduce human color sensitivity. Thus, it is quite desirable to convert the RGB values into the XYZ values that can be compared to the values of a colorimeter. Accordingly, the current study proposes a color conversion method that can analytically calculate the RGB-to-XYZ conversion matrix by utilizing the RGB primaries and the reference white. Experiments on Macbeth colorchecker colors showed that the average color difference between the converted XYZ values of the proposed method and the measured XYZ values of a colorimeter is much below the threshold of distinguishing two adjacent color patches.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.106-109
• /
• 2003

This paper presents a hue preserving gamut mapping algorithm for color monitor and printer. The gamuts of monitor and printer are set by the profile of color reproduction media, specified by ICC(International Color Consortium) and provided by vendors, then those gamuts are represented on the CIE xy color space. In case that the color of monitor are located on out-of-gamut of printer, these are clipped on the point of gamut boundary of printer towards a reference white point. On the other hand, colors are in-gamut of printer are unchanged. An image generated by the algorithm keeps a ratio of each pixel of original image. Advantages of the algorithm are easy to implement and fast processing time than other algorithms which involve hue preserving especially in CIELAB color space.

• Journal of Fashion Business
• /
• v.13 no.4
• /
• pp.21-36
• /
• 2009

The objective of the study is to create color plan for company D based on color images of the Bloomsbury Group paintings, which is an art institute based in Bloomsbury, London, a hometown of the company, to renew the traditional brand image of the company by blending fashion and art. This study analyzed 'D's previous F/W Color planning from 2003 to 2007 through NCS to understand characteristics of company D's color planning. It considered company D's color renewal concept by looking into Bloomsbury Group's backgrounds and pieces. Based on 2008-2009 F/W color trend and the analysis result, the study suggests a color plan with reference to a case study of the company D, for which I work as a colorist. The color renewal of the company D for 2008-2009 F/W season was categorized into theme I. Bloomsbury and theme II. Charleston for planning. The following table summarizes the result of 2008-2009 F/W season color plan with focus on development of new check and print patterns. The significance of the study can be found in that it advanced beyond the color planning stage to be applied to the actual renewal. Through a renewal of an existing brand, a fashion brand can be revitalized to have distinguished competitiveness.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.3
• /
• pp.715-719
• /
• 1998

In this paper, we propose a color enhancement system which is based on the improvement of transition time problem and specific color detection stability. The proposcd system apply the time difference correction step to corrects time difference which is taken place at the transimission process between color signal and color subcarrier signal and to reduce detection errors. And also, we proposed stability method to improve transition time problem and detection efficiency as the control of reference color. The proposed system controls specific color when the mean difference value of detected voltages greater than the value of minimum discriminate voltages of two adjacent color signals. Thus, the color enhancement system improves detection efficiency and controls specific color from the color signal without overlapping of correction range.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.85-88
• /
• 2007

A number of R, G and B LEDs for reference color temperature mixing ratio of RGB was determined by the theory of RGB mixing as a baseline. Once the number of LEDs was determined the objective color temperature from baseline has been achieved by the control the RGB duty ratio. And a practical prototype of 50W floodlighting adjusted by the above algorithm. The micro controller was developed with control algorithm for RGB duty ratio to obtain the objective color temperature. Detailed experiments to optimize algorithm of duty ratio and color temperature will be discussed in this paper as well.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.7
• /
• pp.2938-2956
• /
• 2020

Objective image quality assessment (IQA) models have been developed by effective features to imitate the characteristics of human visual system (HVS). Actually, HVS is extremely sensitive to color degradation and complex texture changes. In this paper, we firstly reveal that many existing full reference image quality assessment (FR-IQA) methods can hardly measure the image quality with contrast and masking texture changes. To solve this problem, considering texture masking effect, we proposed a novel FR-IQA method, called Texture and Color Quality Index (TCQI). The proposed method considers both in the masking effect texture and color visual perceptual threshold, which adopts three kinds of features to reflect masking texture, color difference and structural information. Furthermore, random forest (RF) is used to address the drawbacks of existing pooling technologies. Compared with other traditional learning-based tools (support vector regression and neural network), RF can achieve the better prediction performance. Experiments conducted on five large-scale databases demonstrate that our approach is highly consistent with subjective perception, outperforms twelve the state-of-the-art IQA models in terms of prediction accuracy and keeps a moderate computational complexity. The cross database validation also validates our approach achieves the ability to maintain high robustness.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.121-133
• /
• 2007

The CMS(color management system) software was to enable consistent color reproduction from original to reproduction. The CMS was to create RGB monitor and printer characterization profiles and then use the profiles for device independent color transformation. The implemented CMM(color management module) used the CIELAB color space for the profile connection. Various monitor characterization model was evaluated for proper color transformation. To construct output device profile, SLI(sequential linear interpolation) method was used for the color conversion from CMYK device color to device independent CIELAB color space and tetrahedral interpolation method was used for backward transformation. UCR(under color removal) based black generation algorithm was used to construct CIELAB to CMYK LUT(lookup table). When transforming the CIE Lab colour space to CMYK, it was possible to involve the gray revision method regularized in the brightness into colour transformation process and optimize the colour transformation by black generation method based on UCR technique. For soft copy colour proofing, evaluating several monitor specialism methods showed that LUT algorithm was useful. And it was possible to simplify colour gamut mapping by constructing both the look-up table and the colour gamut mapping algorithm to a reference table.