• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.901-904
• /
• 2000

A direct authentication from gray-scale image, instead of the conventional multi-step preprocessing, is proposed using Gabor filter-based features from the gray-scale fingerprint around core point. The core point is located as a reference point for the translation invariant matching. And its principal symmetry axis is detected for the rotation invariant matching from its neighboring region centered at the core point. And then fingerprint is divided into non-overlapping blocks with respect to the core point and features are directly extracted form the blocked gray level fingerprint using Gabor filter. The proposed fingerprint authentication is based on the Euclidean distance between the corresponding Gabor features of the input and the template fingerprints. Experiments are conducted on 300${\times}$300 fingerprints obtained from a CMOS sensor with 500 dpi resolution, and the proposed method could lower the False Reject Rate(FRR) to 18.2% under False Acceptance Rate(FAR) of 0%.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.310-315
• /
• 2011

General portal machine represents a distinct weak spot concerning their structural behavior because of long protruding structure components, such as saddles and rams. The weak point causes the deformation of the machine tool and consequently rises a severe machining error. The purpose of this study is to improve the structural design of crossrail in order to minimize it's distortion. Tool Center Point (TCP) was chosen as a reference point for evaluating the distortion effect of a crossrail and topological optimization was adopted as a method of structural design improvement. The displacements of TCP according to the machining positions were investigated by structural analyses for both of original crossrail design and the improved one. The comparing results showed that the displacement of TCP could be reduced about 55% maximum.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.1
• /
• pp.83-91
• /
• 2010

In this paper, the feasibility of the cost function having two control factors were discussed in compared to two others which has one different control factor respectively. As of the control factors, the dynamic response of a discrete system and the vibrational intensity at the reference point which is the connecting point of a discrete system to a flexible beam were controlled actively by the control force obtained from the minimization of the cost function. The method of feedforward control was employed for the control strategy. The reduction levels of the dynamic response of a discrete system and the vibrational intensity at a reference point, and also the input power induced by the control force were evaluated numerically in cases of the three different cost functions. In comparison with the results obtained from the cost functions of one control factor, which is the dynamic response or the vibrational intensity, in most cases of the cost function of two control factors the better or similar results were obtained. As a conclusion, it is surely noted that both the dynamic response and the vibrational intensity of the vibrating system be controlled up to the expected level by using the single cost function having two control factors.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.1-7
• /
• 2011

In the performance test for wind turbines of medium and large, The reference met-mast should be installed for measurement reference wind speed as IEC 61400-12-1 standards and design of booms for mounted an anemometer must be considered exactly. Boom-mounted cup anemometer are influenced by flow distortion of the mast and the boom. Therefore design of booms must be important so that flow distortion due to booms should be kept below 0.5%. But, in some cases at size of met-mast structure, the distance of boom from mast is longer then measurement of wind speed is impossible because of oscillation of boom-mounted anemometer. In this paper, We measured a wind speed at several point from mast and boom and we analyzed the error of wind speed at each point of measurement. Also, we will suggest a correction method using the data curve fitting about errors of wind speed between each point of mounted anemometer.

• Smart Structures and Systems
• /
• v.4 no.4
• /
• pp.391-406
• /
• 2008

This study attempts to develop a real-time debonding monitoring system for carbon fiber-reinforced polymer (CFRP) strengthened structures by continuously inspecting the bonding condition between the CFRP layer and the host structure. The uniqueness of this study is in developing a new concept and theoretical framework of nondestructive testing (NDT), in which debonding is detected without relying on previously-obtained baseline data. The proposed reference-free damage diagnosis is achieved based on the concept of time reversal acoustics (TRA). In TRA, an input signal at an excitation point can be reconstructed if the response signal measured at another point is reemitted to the original excitation point after being reversed in the time domain. Examining the deviation of the reconstructed signal from the known initial input signal allows instantaneous identification of damage without requiring a baseline signal representing the undamaged state for comparison. The concept of TRA has been extended to guided wave propagations within the CFRP-strengthened reinforced concrete (RC) beams to improve the detectibility of local debonding. Monotonic and fatigue load tests of large-scale CFRP-strengthened RC beams are conducted to demonstrate the potential of the proposed reference-free debonding monitoring system. Comparisons with an electro-mechanical impedance method and an inferred imaging technique are provided as well.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.471-480
• /
• 2018

Accurate target coordinate is very important in military operations especially field artillery's ground-to-ground attack and air-force's air-to-ground attack. DOS(or TAS) is used to acquire target coordinates from long distance. DOS is comprised of LRF and goniometer. LRF measures distance between DOS and target. Goniometer is comprised of azimuth and vertical angular sensors, DMC and internal GPS receiver. DOS must set the position and orientation(finding grid north) before measurement step(target coordinate acquisition). To improve accuracy of target coordinate, VRS RTK and reference point method are proposed in DOS setup step. VRS RTK provides accurate location coordinate with small deviations, providing high accuracy and precision in positioning and orientation. As a result, horizontal coordinate(easting and northing) accuracy is improved from 2.68 mil(C.L. = 0.95) mil to 0.58 mil(C.L. = 0.95).

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.432-437
• /
• 2008

This paper proposes a defect cell extraction algorithm for TFT-LCD auto-repair system. Auto defect search algorithm and automatic defect cell extraction method are very important for TFT-LCD auto repair system. In the previous literature[1], we proposed an automatic visual inspection algorithm of TFT-LCD. Based on the inspected information(defect size and defect axis, if defect exists) by the automatic search algorithm, defect cells should be extracted from the input image for the auto repair system. For automatic extraction of defect cells, we used a novel block matching algorithm and a simple filtering process in order to find a given reference point in the LCD cell. The proposed defect cell extraction algorithm can be used in all kinds of TFT-LCD devices by changing a stored template which includes a given reference point. Various experimental results show the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.68-72
• /
• 1990

This paper describes a method of calculating the viewing parameters of a camera using a perspective view of a circular pattern. The proposed method determines the angle of pan, tilt, and swing, as well as the distance from the camera to the reference point of a world coordinate system, using simple equations. The proposed method is so simple and accurate that when used in a well-controled environment as in robot vision systems or visual inspection systems it may even seem trivial.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.2
• /
• pp.59-64
• /
• 1983

This paper deals with the transient energy method of transient stability analysis of multi-machine power system by improving the transfer conductance, the kinetic energy and the critical transient energy. The tranfer conductance is considered more correctly, the generators of system are seperated to two states (critical and the rest state)and the correction term of critical transient energy (to reference point) is added. This analysis is performed by digital computer simulation and the application of this method to two model systems has shown its superiority to other available methods.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.772-784
• /
• 2024

The hexagonal nodal code RENUS has been enhanced to handle irregularly deformed hexagonal assemblies. The underlying RENUS methods involving triangle-based polynomial expansion nodal (T-PEN) and corner point balance (CPB) were extended in a way to use line and surface integrals of polynomials in a deformed hexagonal geometry. The nodal calculation is accelerated by the coarse mesh finite difference (CMFD) formulation extended to unstructured geometry. The accuracy of the unstructured nodal solution was evaluated for a group of 2D SFR core problems in which the assembly corner points are arbitrarily displaced. The RENUS results for the change in nuclear characteristics resulting from fuel deformation were compared with those of the reference McCARD Monte Carlo code. It turned out that the two solutions agree within 18 pcm in reactivity change and 0.46% in assembly power distribution change. These results demonstrate that the proposed unstructured nodal method can accurately model heterogeneous thermal expansion in hexagonal fueled cores.