• Economic and Environmental Geology
• /
• v.57 no.1
• /
• pp.17-23
• /
• 2024

Ground penetrating radar (GPR) survey is a geophysical method that utilizes electromagnetic waves reflecting from a boundary where the electromagnetic property changes. As the frequency of the antenna is about 25 MHz ~ 1 GHz, it is effective to acquire high resolution images of underground pipe, artificial structure, underground cavity, and underground structure. In this study, we analyzed the change of signals reflected from the same underground objects according to the arrangement of transceiver antennas used in ground penetrating radar survey. The antenna used in the experiment was 200 MHz, and the survey was performed in the vertical direction across the sewer and the parallel direction along the sewer to the sewer buried under the road, respectively. A total of five antenna array methods were applied to the survey. The most used arrangement is when the transmitting and receiving antennas are all perpendicular to the survey line (PR-BD). The PR-BD arrangement is effective when the object underground is a horizontal reflector with an angle of less than 30°, such as the sewer under investigation. In this case study, it was confirmed that the transmitter and receiver antennas perpendicular to the survey line (PR-BD) are the most effective way to show the underground structure. In addition, in the case where the transmitting and receiving antennas are orthogonal to each other (XPOL), no specific reflected wave was observed in both experiments measured across or parallel to the sewer. Therefore, in the case of detecting undiscovered objects in the underground, the PR-BD array method in which the transmitting and receiving antennas are aligned in the direction perpendicular to the survey line taken as a reference and the XPOL method in which the transmitting and receiving antennas are orthogonal to each other are all used, it can be effective to apply both of the above arrangements after setting the direction to 45° and 135°.

• Geomechanics and Engineering
• /
• v.36 no.2
• /
• pp.145-156
• /
• 2024

The mechanical properties of the concrete-frozen soil interface play a significant role in the stability and service performance of construction projects in cold regions. Current research mainly focuses on the precast concrete-frozen soil interface, with limited consideration for the more realistic cast-in-place concrete-frozen soil interface. The two construction methods result in completely different contact surface morphologies and exhibit significant differences in mechanical properties. Therefore, this study selects silty clay as the research object and conducts direct shear tests on the concrete-frozen soil interface under conditions of initial water content ranging from 12% to 24%, normal stress from 50 kPa to 300 kPa, and freezing temperature of -3℃. The results indicate that (1) both interface shear stress-displacement curves can be divided into three stages: rapid growth of shear stress, softening of shear stress after peak, and residual stability; (2) the peak strength of both interfaces increases initially and then decreases with an increase in water content, while residual strength is relatively less affected by water content; (3) peak strength and residual strength are linearly positively correlated with normal stress, and the strength of ice bonding is less affected by normal stress; (4) the mechanical properties of the cast-in-place concrete-frozen soil interface are significantly better than those of the precast concrete-frozen soil interface. However, when the water content is high, the former's mechanical performance deteriorates much more than the latter, leading to severe strength loss. Therefore, in practical engineering, cast-in-place concrete construction is preferred in cases of higher negative temperatures and lower water content, while precast concrete construction is considered in cases of lower negative temperatures and higher water content. This study provides reference for the construction of frozen soil-structure interface in cold regions and basic data support for improving the stability and service performance of cold region engineering.

• Industry Promotion Research
• /
• v.9 no.4
• /
• pp.429-441
• /
• 2024

In this study, 293 listed enterprises in Shandong Province and Jiangsu Province, China, from 2013 to 2023 are selected as the research object, and the questionnaire method is used to investigate the enterprises that carry out digital transformation, and the data collected from the questionnaires are statistically analyzed. By combining theoretical elaboration and empirical research, the relationship between enterprise digital transformation, business model innovation and corporate performance is investigated. The research results show that digital transformation has a positive impact on corporate performance and business model innovation, and business model innovation plays a mediating role between digital transformation and corporate performance. Based on the conclusions of the study, companies should actively promote digital transformation and accelerate its process. Companies should optimize the company's business innovation model to enhance the company's competitiveness. Companies should accelerate the establishment of a sound policy support for the digital transformation of enterprises, to provide support and reference for the implementation of digital transformation and business model innovation.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.637-644
• /
• 2024

Building Information Modeling (BIM) technology has been widely adopted in the construction industry. However, a challenge encountered in the operational phase is that building object data cannot be updated in real time. The concept of Digital Twin is to digitally simulate objects, environments, and processes in the real world, employing real-time monitoring, simulation, and prediction to achieve dynamic integration between the virtual and the real. This research considers an example related to indoor air quality for realizing the concept of Digital Twin and solving the problem that the digital twin platform cannot be updated in real time. In indoor air quality monitoring, the ventilation rate and the presence of occupants significantly affects carbon dioxide concentration. This study uses the indoor carbon dioxide concentration recommended by the Taiwan Environmental Protection Agency as a reference standard for air quality measurement, providing a solution to the aforementioned challenges. The research develops a digital twin platform using Unity, which seamlessly integrates BIM and IoT technology to realize and synchronize virtual and real environments. Deep learning techniques are applied to process camera images and real-time monitoring data from IoT sensors. The camera images are utilized to detect the entry and exit of individuals indoors, while monitoring data to understand environmental conditions. These data serve as a basis for calculating carbon dioxide concentration and determining the optimal indoor air exchange volume. This platform not only simulates the air quality of the environment but also aids space managers in decision-making to optimize indoor environments. It enables real-time monitoring and contributes to energy conservation.

• Wind and Structures
• /
• v.39 no.5
• /
• pp.351-365
• /
• 2024

Offshore floating photovoltaic (PV) is the technological commanding heights of the future development of the photovoltaic industry, especially under the action of extreme weather such as typhoons and huge waves, the flow field mechanism of offshore large-span floating flexible PV arrays is more complex, and there is a lack of effective offshore floating PV wind load prediction models in the relevant design codes of flexible PV in the world. Taking a typical flexible PV key demonstration project as the research object, a three-dimensional mesoscale Weather Research and Forecasting (WRF) - Simulating Waves Nearshore (SWAN) - Finite-Volume Coastal Ocean Model (FVCOM) real-time two-way coupling simulation method based on Mapped Contact Interface (MCT) coupler was proposed, a meso/small-scale nested typhoon-wave-flow numerical pool of PV array was established, the wind load distribution characteristics of single-row floating flexible PV were studied, the driving mechanism of inter-row flow field of floating large-span flexible PV array was compared and analyzed, and finally the value model of the lift/drag coefficient of PV array under extreme wind conditions was established. The results show that the average wind pressure of single-row floating flexible PV presents trapezoidal and L-shaped distribution rules under different wind direction angles, and the temporal instability and spatial discontinuity in the low wind speed area of the floating flexible PV array and the complex and disordered alternating vortex phenomenon are the main reasons for the inter-row interference, and the proposed fitting formula of two-dimensional lift/drag coefficient can encompass the extreme value of the actual wind pressure, and the maximum error is controlled within 10 %, which can provide a reference for the prediction of the design value of this kind of floating flexible PV wind load.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• The Korean Journal of Air & Space Law and Policy
• /
• v.26 no.1
• /
• pp.177-213
• /
• 2011

The purpose of this paper is to research on the liability and cases for space damage with reference to the space activity under the international space treaty and national space law of major countries. The United Nations has adopted two treaties relating to the liability for space damage as follows: the Outer Space Treaty of 1967 and the Liability Convention of 1972. Korea has enacted the Outer Space Damage Compensation Act of 2008 relating to the liability for space damages. The Outer Space Treaty of 1967 regulates the international responsibility for national activities in outer space, and the national tort liability for damage by space launching object. The Liability Convention of 1972 regulates the absolute liability by a launching state, the faulty liability by a launching state, the joint and several liability by a launching state, the person claiming for compensation, the claim method for compensation, the claim period of compensation, the claim for compensation and local remedy, the compensation amount for damage by a launching state, and the establishment of the Claims Commission. The Outer Space Damage Compensation Act of 2008 in Korea regulates the definition of space damage, the relation of the Outer Space Damage Compensation Act and the international treaty, the non-faulty liability for damage by a launching person, the concentration of liability and recourse by a launching person, the exclusion of application of the Product Liability Act, the limit amount of the liability for damage by a launching person, the cover of the liability insurance by a launching person, the measures and assistance by the government in case of occurring the space damage, and the exercise period of the claim right of compensation for damage. There are several cases with reference to the liability for damage caused by space accidents as follows: the Collision between Iridium 33 and Cosmos 2251, the Disintegration of Cosmos 954 over Canadian Territory, the Failure of Satellite Launching by Martin Marietta, and the Malfunctioning of Westar VI Satellite. In the disputes and lawsuits due to such space accidents, the problems relating to the liability for space damage have been settled by the application of absolute(strict) liability principle or faulty liability principle. The Liability Convention of 1972 should be improved as follows: the clear definition in respect of the claimer of compensation for damage, the measure in respect of the enforcement of decision by the Claims Commission. The Outer Space Damage Compensation Act of 2008 in Korea should be improved as follows: the inclusion of indirect damage into the definition of space damage, the change of the currency unit of the limit amount of liability for damage, the establishment of joint and several liability and recourse right for damage by space joint launching person, and the establishment of the Space Damage Compensation Review Commission. Korea has built the space center at Oinarodo, Goheung Province in June 2009. Korea has launched the first small launch vehicle KSLV-1 at the Naro Space Center in August 2009 and June 2010. In Korea, it will be the possibility to be occurred the problems relating to the international responsibility and the liability for space damage in the course of space activity. Accordingly the Korean government and launching organization should make the legal and systematic policy to cope with such problems.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.640-655
• /
• 2014

Many of today's video systems have additional depth camera to provide extra features such as 3D support. Thanks to these changes made in multimedia system, it is now much easier to obtain depth information of the video. Depth information can be used in various areas such as object classification, background area recognition, and so on. With depth information, we can achieve even higher coding efficiency compared to only using conventional method. Thus, in this paper, we propose the 2D video coding algorithm which uses depth information on top of the next generation 2D video codec HEVC. Background area can be recognized with depth information and by performing HEVC with it, coding complexity can be reduced. If current CU is background area, we propose the following three methods, 1) Earlier stop split structure of CU with PU SKIP mode, 2) Limiting split structure of CU with CU information in temporal position, 3) Limiting the range of motion searching. We implement our proposal using HEVC HM 12.0 reference software. With these methods results shows that encoding complexity is reduced more than 40% with only 0.5% BD-Bitrate loss. Especially, in case of video acquired through the Kinect developed by Microsoft Corp., encoding complexity is reduced by max 53% without a loss of quality. So, it is expected that these techniques can apply real-time online communication, mobile or handheld video service and so on.

• Journal of dental hygiene science
• /
• v.11 no.4
• /
• pp.345-352
• /
• 2011

The purpose of this study was to survey clinical dental hygienists for their perceived ethical dilemma and professionalism. The subjects in this study were 393 dental hygienists who randomly selected worked in dental clinics. After a survey was conducted, the collected data were analyzed with a SPSSWIN 18.0 program. The findings of the study were as follows: Dental hygienists perceived ethical dilemma scored 2.46 on a 5-point scale on average. In view of its sub-areas, the sub-areas which scored highest was 'dental hygienist with the profession'(2.62), followed by 'dental hygienist with object'(2.41) and 'dental hygienist with coworker'(2.34) in their order. Dental hygienists perceived professionalism scored 3.28 on a 5-point scale on average. In view of its sub-areas, the sub-areas which scored highest was 'sence of public service'(3.55), followed by 'autonomy'(3.42), 'reference professional group'(3.14) and 'sence of mission'(3.01) in their order. In regard to the relationship of the general characteristics to professionalism, those who were older, whose career was longer, whose education was highest and who were married were statistically significantly ahead of their counterparts in that aspect. In relation to factors affecting professionalism, longer career and higher education had a better impact on professionalism. Those factors made a 13% prediction of that.

• Spatial Information Research
• /
• v.23 no.1
• /
• pp.59-68
• /
• 2015

As part of an effort to leap smart cadastre system by doing rearrangement of various mismatches in the land register, the cadastre renovation project is being recently conducted. In response to this demand, this paper proposes an image-based rapid parcel boundary demarcation plan using the high resolution aerial image with a GSD (Ground Sample Distance) of 5cm that matches to real ground boundary situation in residential area. To review the feasibility and accuracy of this proposed methodology, we compared the accuracy of parcel boundary point and parcel area extracted from the digital stereo plotting on the basis of results of cadastral boundary surveying and land register over the selected two test areas. The comparative accuracy result of all boundary points by digital stereo plotting is satisfied with accuracy requirement according to the criteria of the enforcement regulation of cadastral surveying, whereas it exceeded allowable error of ${\pm}0.07m$, more strictly specified in the Special Act on Cadastral Renovation. And about 20% of the total 70 parcels extracted by digital plotting are out of area tolerance in Jecheon study area, and 10% of the total 19 parcels in Suwon study area. The parcels exceeding accuracy limit are mostly due to the occlusion caused by building roof or eaves, and the obstacles such as trees existing on the boundary. Furthermore, an object identification is impossible in image because of vague boundary reference in case of nonexistence of man-made structures or natural features. Therefore, the utilization of boundary identification stickers is recommended as a solution for these types of land parcel.