• 한국통신학회논문지
• /
• 제33권10C호
• /
• pp.820-828
• /
• 2008

H.264/AVC 동영상 부호화 표준은 높은 부호화 효율을 위해서 가변 블록 크기 부호화, 1/4 화소 정확도의 움직임 예측, 다중 참조 프레임 사용, 율-왜곡 최적화 등과 같은 기법을 도입하였다. 그러나 이러한 부호화 방법들은 움직임 예측에 필요한 복잡도를 크게 증가시키는 단점이 있다. 특히 다중 참조 프레임 움직임 예측을 수행함으로써 증가되는 계산량은 탐색되는 참조 프레임의 개수에 따라 선형적으로 비례하여 늘어난다. 따라서 본 논문에서는 다중 참조 프레임 움직임 예측에서 탐색되는 참조 프레임의 개수를 효율적으로 조절함으로써 복잡도를 크게 줄일 수 있는 방법을 제안한다. 제안하는 알고리듬은 인터 $16{\times}16$ 모드와 인접 블록의 최적 참조 프레임 정보를 이용하여 나머지 화면간 모드들에서의 불필요한 탐색 과정을 생략한다. 실험 결과는 제안하는 방법을 적용함으로써 영상의 화질과 비트율의 큰 변화 없이 부호화 행 시간을 평균 58.54% 정도의 큰 폭으로 감소시킴을 보인다. 또한 이 방법은 다른 고속 움직임 예측 알고리듬을 같이 적용함으로써 추가적인 성능 향상을 얻을 수 있는 확장성을 가진다.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.245-250
• /
• 2009

We propose a digital holographic interference analysis method based on a 2-frame phase-shifting technique for measuring an optical mirror surface. The technique using 2-frame phase-shifting digital interferometry is more efficient than multi-frame phase-shifting techniques because the 2-frame method has the advantage of a reduced number of interferograms, and then takes less time to acquire the wanted topography information from interferograms. In this measurement system, 2-frame phase-shifting digital interferograms are acquired by moving the reference flat mirror surface, which is attached to a piezoelectric transducer, with phase step of 0 or $\pi$/2 in the reference beam path. The measurements are recorded on a CCD detector. The optical interferometry is designed on the basis of polarization characteristics of a polarizing beam splitter. Therefore the noise from outside turbulence can be decreased. The proposed 2-frame algorithm uses the relative phase difference of the neighbor pixels. The experiment has been carried out on an optical mirror which flatness is less than $\lambda$/4. The measurement of the optical mirror surface topography using 2-frame phase-shifting interferometry shows that the peak-to-peak value is calculated to be about $0.1779{\mu}m$, the root-mean-square value is about $0.034{\mu}m$. Thus, the proposed method is expected to be used in nondestructive testing of optical components.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.312-317
• /
• 1996

This paper compares the output voltage control strategies of three-phase PWM inverter for uninterruptible power supply. The feedforward control, feedforward/feedback control, and decoupled feedback control in both the synchronous reference frame and the stationary reference frame are examined. In particular, it is shown that the response of the decoupled feedback controller in the synchronous reference frame can be improved by pole-zero cancellation method. It is also shown that the pole-zero cancellation method reduces to the deadbeat control, when it is implemented with digital controller.

• 방송공학회논문지
• /
• 제23권5호
• /
• pp.718-721
• /
• 2018

최근 차세대 국제 비디오 압축 표준 제정에 딥러닝을 이용하여 비디오 부호화 효율을 향상시키기 위한 다양한 시도가 이루어지고 있다. 본 논문에서는 참조프레임 리스트에 포함된 복원 프레임을 이용하여 현재 프레임의 가상 참조프레임을 딥러닝으로 생성하여 화면 간 예측 부호화에 이용하는 알고리즘을 제안한다. 실험에 따르면 제안 알고리즘은 HEVC 참조 소프트웨어 대비 Random Access 실험 환경에서 평균 1.9%의 BD-rate 감소 효율을 제공한다.

• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.183-190
• /
• 2000

본 연구에서는 피에조콘 시험의 유한요소해석을 점탄소성 bounding surface 구성모델과 large displacement large deformation 개념을 이용하여 수행하였다. 이에 따라 구성모델, 가상일의 방정식 및 관련 유한요소 식 등을 Updated Lagrangian reference frame에서 formulation 하였으며 지반의 거동은 theory of mixtures를 통하여 설명하였다. Theory of mixtures 역시 Updated Lagrangian reference frame에서 formulation하였다. 구성모델 중 점성 부분이 전체 formulation 과정에 중요한 영향을 미친다는 사실이 고찰되었다. 유한요소 해석의 결과는 실내에서 실시한 대형 모델시험의 결과와 비교, 분석하였다. Formulation 과정은 'I' 결과는 'II'에서 설명된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.292-294
• /
• 2007

Recently, for satisfying many application demands such as coding delay, computing power, transporting channel characteristic, etc, many profiles are supported in video coding standards. Therefore, in transcoding between same standards or between other standards, the functional difference of profiles supported by application occur many problems. In this paper, transcoding MPEG-2 main profile to H.264/AVC baseline profile which has restriction in the number of reference frame is focused. In this case, the bidirectional prediction supported in MPEG-2 main profile is not supported in H.264/AVC baseline profile. Also, in the restriction of reference frame, motion vectors in the MPEG-2 decoder as predictor should be adjusted. In this paper, the proposed algorithm is based on the characteristic of which motion. vector is uniform according to the distance from reference frame. The adaptive search techniques through the determination of the uniformity extremely reduce the computational complexity.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2012년도 추계학술대회
• /
• pp.259-262
• /
• 2012

In this paper, we propose a new fast algorithm for effective scene change detection. The proposed algorithm exploits Otsu threshold matching technique, which was proposed earlier. In this method, the current and the reference frames are divided into square blocks of particular size. After doing so, the pixel histogram of each block is generated. According to Otsu method, every histogram distribution is assumed to be bimodal, i.e. pixel distribution can be divided into two groups, based on within-group variance value. The pixel value that minimizes the within-group variance is said to be Otsu threshold. After Otsu threshold is found, the same procedure is performed at the reference frame. If the difference between Otsu threshold of a block in the current frame and co-located block in the reference frame is larger than predefined threshold, then a scene change between those two blocks is detected.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권2호
• /
• pp.107-115
• /
• 2006

In this paper, a new speed sensorless control based on an instantaneous reactive power is proposed for the interior permanent magnet synchronous motor(IPMSM) drives. In proposed algorithm, the current observer estimates the line currents and the estimated speed can be yielded from the voltage equation because the information of speed is included in back EMF. To implement speed sensorless control, the current observer is composed by using the voltage equation of the IPMSM in the stationary reference frame fixed to the stator. The estimated speed of the rotor is composed by using the voltage equation of the IPMSM in the rotating reference frame fixed to the rotor The estimated speeds to minimize the speed error compensated by using the instantaneous reactive power. The instantaneous reactive power is calculated on the rotating reference frame fixed to the rotor. The effectiveness of the preposed algorithm is confirmed by the experiments.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.391-397
• /
• 2011

An inductance measurement method for interior permanent magnet synchronous machine (IPMSM) is proposed in this paper. In this method, the motor is measured at standstill condition, and only a 3-phase voltage source, an oscilloscope and a DC voltage source are required. Depending on the deductive dq-axis voltage equations in the stationary frame of reference, the dq-axis inductances at different current magnitude and vector angle can be calculated by the measured 3-phase voltages and currents. And hence, the saturation and cross-magnetizing effect of the inductances are measurable. This paper introduces the principle equations, experiment setup, data processing, and results comparison on the concentrated-winding and distributed-winding IPMSMs.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.718-725
• /
• 2009

To get instantaneous reference data in a single power system with vector space phasors, the instantaneous load current is adopted as a phase and another new signal, which is delayed through filtering by the phase-delay property of a low-pass filter, is used as the secondary phase. Because the two-phases have a different phase, the instantaneous value of the harmonic current can be obtained without a time-delay in calculation. The reference voltage is created by multiplying the coefficient k by the compensation current using the rotating reference frame synchronized with the source-frequency. To verify the validity of the proposed control method, experiments are carried out on a prototype of the single-phase hybrid active power filter system.