• Journal of Mechanical Science and Technology
• /
• v.20 no.3
• /
• pp.358-365
• /
• 2006

The hydraulic pump of an Electro-hydrostatic Actuator should be able to quickly feed large volume of oil into hydraulic cylinder in order to reduce the response time. On the other hand, it should be also able to precisely dispense small amount of oil through low-speed operation so that the steady state position control error of the actuator can be accurately compensated. Within the scope of axial piston type hydraulic pumps, this paper is focused on the investigation how the surface treatment of their cylinder barrel with TiN plasma coating can contribute to the reduction of the friction and wear rate of valve plate in the low-speed range with mixed lubrication. The results showed that the friction torque of the valve plate mated with a TiN coated cylinder barrel could be reduced to 22% of that with an uncoated original one when load pressure was 300 bar and rotational speed 100 rpm. It means that the torque efficiency of the test pump was expected to increase more than 1.3% under the same working condition. At the same time, the wear rate of the valve plate could be reduced to $40\sim50%$.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.3
• /
• pp.95-102
• /
• 2013

It is indispensable to modern society metal processing since the industrialized rapidly, but it is a metalworking cutting fluid immediately. In addition, this means selecting a emulsion on the basis of quality criteria processing method, the material of the material, cutting depth, cutting speed, Djourou fence Liang, and surface roughness, cutting oil, the shape of the device based on the emulsion, I will be the structure of the tank, filtration equipment also changes. In particular, acting bacteria is now breeding in response to the passage of time due to metal ion degradation due to heat generated hydraulic fluid leakage, humidity tung, during processing, seep from processing material at the time of processing the water-soluble cutting oil for generating the malodor by dropping significantly the performance of the cutting oil to corruption from, sometimes by introducing various additives to suppress spoilage in advance. In this study, we expect the effect of the cost reduction in the extension of fluid replacement cycle through the application of the management apparatus and deep understanding in the management of cutting fluid, the working environment through the understanding and interest of workers in the production site more than anything I try to become useful for the improvement.

• Journal of the Korean Dietetic Association
• /
• v.15 no.3
• /
• pp.262-277
• /
• 2009

Fresh-cut foods have been widely used in the school foodservice industry due to their convenience and saving effects of labor and working hours. This study evaluated the effectiveness of using fresh-cut foods in school foodservice with respect to cost efficiency, customer satisfaction, employee satisfaction, and productivity. First, in terms of cost efficiency, the cost of the fresh-cut food per meal price significantly increased by 2.6% via the new production plan. Meanwhile, the costs of labor and food wastes significantly decreased by 3.0% and 0.3%, respectively, after implementing the new plan. Second, customer satisfaction towards foodservice significantly increased, from 2.94 points prior to the new plan to 3.45 points. Third, foodservice productivity such as of the number of meals per full-time equivalent employee increased by 5.7 meals, from 143.0 meals to 148.7 meals after intervention. The productivity index of work hours for producing a meal also increased and was reflected by a work time reduction of 0.77 minutes, specifically from 4.25 minutes to 3.48 minutes. The labor cost per meal also decreased by 29.9 won, from 331.91 won to 301.97 won, but there was no significant difference. Through these results, we identified that using pre-process foods in school foodservice has positive effects on labor saving, customer satisfaction, and employee work satisfaction.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.99-105
• /
• 2019

Unlike typical a dynamic positioning (DP) system, a DP-assisted mooring system must determine a set point (SP) that can ensure a mooring tension safety range to prevent an excessive increase in mooring tension. In this paper, a new algorithm for determining the SP is suggested in order to reduce the tension on all the mooring lines. To determine the SP, a working area around the vessel is represented by a rectangular grid. Thus, the size of the grid area is limited considering the offset of a vessel with a mooring system. At each grid's nodes, the resultant tension from all the mooring lines is estimated using the time history of the tension and vessel's position. The results of static analyses for each grid position are used to estimate the global tension. Consequently, the SP is automatically selected as a position satisfying criterion for minimizing the total tension. In order to validate the suggested algorithm, a motion simulation with the control system in the time domain and a discussion of the results are presented.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.9
• /
• pp.35-44
• /
• 2018

Purpose - In endless competition, companies pursue cost reduction and work efficiency. So, entrepreneurs try to increase job intensity, which may lead to job stress and high turnovers because of job burnout. But, Information systems are acknowledged as a work support tool that secures work convenience and the productivity of employees. In this study, we aimed to confirm the effects of information systems in reduing the work overload of employees in a human resource intensive industry. Research design, data and methodology - This is based on the job demands-resources model, conducting an empirical analysis of surveys given to hospital employees working in a human resource intensive industry. Results - The research revealed that information systems reduced the work overload of employees in a human resource intensive industry. Conclusion - This study confirmed the effects of information systems as a job resource based on JD-R theory, and presentation of empirical results indicated that information systems alleviate employee job overload and increases job satisfaction in the medical services industry. In the medical services industry, using electronic health record system decreases in work overload, which results in employees gaining time for self-development and time management, reducing job stress, and leading to job satisfaction.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.3
• /
• pp.9-20
• /
• 2016

This study compared the effect of green light consequent on maximum brightness 85 lx and intial brightness 15 lx, and its accompanying psychological, physiological response. 1) As a result of psychology(general stress evaluation, Symptom Checklist-90-Revision) evaluation, all stress evaluation items mostly showed a decrease, and they are comparatively positively evaluated in minimum brightness 15 lx comparing to maximum brightness 85 lx. 2) Physiological (Heart Rate Variability) evaluation result was included in stable range in all cardiovascular system variables after light stimulus in time of comparison with the standard range; in addition, the Heart Rate Variability evaluation result was found to be stable in all cardiovascular system variables except Low Frequency in minimum brightness 15 lx comparing to maximum brightness 85 lx. 3) Green light was found not to appear as a stimulating factor in the human body in time of space projection, being found to be effective in stability of mind and body, and reduction in stress. Thus, it was found that green light functioned as an emotional, relaxing tranquilizer by working on the sympathetic nervous system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.162-169
• /
• 2000

This study was carried out to develop a continuously variable-speed transmission(CVT) for agricultural tractor. A full-toroidal CVT mechanism with four discs and six rollers was selected as a device for changing speed ratio continuously. In the step of system layout design, the sizes of roller cylinders and end-load cylinder, which were critical factors for controlling the variator, were designed. Also the control pressure range was designed to limit the contact pressure of variator. In order to make the maximum speed of vehicle as 30km/h, the planetary gear and the six pairs of gears were designed. Also the hydraulic clutch, silent chain, hydraulic manifold and electronic controller were designed. After the design, a prototype with CVT controller was developed and tested. The speed of vehicle was changed continuously to the speed set by driver and the settling time was about 0.52 second at the step-response test (reduction ratio of variator 2.0 to 1.0), which was acceptable as a response time for working with tractor.

• Smart Media Journal
• /
• v.5 no.1
• /
• pp.130-136
• /
• 2016

In this paper, the real time monitoring system for the abnormal state of marine algae does not detect the plankton which may directly cause the red tide or the water bloom. But checks both oxygen reduction and nitrogen reduction in water, which indicates the characteristics of zooplankton and phytoplankton respectively, and this system makes a module that monitors in real time the temperature and the illumination of the water, which are indirect factors, with sensors placed in and outside the water, and this module transmits signals periodically at specific intervals to a sever that builds up data base, and the data collected in these ways will be analyzed and compared with the standard data from Ministry of Oceans and Fisheries, and then these data will be made the adequate form of information to be provided to the users as visual information, thus, this system intends to make a red tide and water bloom monitoring system tailored for individual fish farm businesses that has local characteristics and can quickly operate outside working hours, which differs from the existing wide area detecting and monitoring systems.

• Transactions of Materials Processing
• /
• v.28 no.4
• /
• pp.203-211
• /
• 2019

In this study, the weight of type IV pressure vessel is optimized through the burst pressure condition using the finite element analysis (FEA) based on the genetic algorithm (GA). The optimization design variables include the thickness of composite layers and the winding angles. The optimized design variables are validated using the numerical simulations for the pressure vessel. Consequently, the weight is decreased by about 6.5% as compared to the previously reported results for Type III pressure vessel. Additionally, a method which reduces the entire optimization time is proposed. In the original method, the population size is constant across all generations. However, the proposed method could reduce the workload through the reduction of the population size by half for every 25 generations. Thus, the proposed method is observed to increase the weight by about 0.1%, however, the working time for the optimization could be decreased by about 46.5%.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.54.3-55
• /
• 2016

DEEP-South Scheduling and Data reduction System (DS SDS) consists of two separate software subsystems: Headquarters (HQ) at Korea Astronomy and Space Science Institute (KASI), and SDS Data Reduction (DR) at Korea Institute of Science and Technology Information (KISTI). HQ runs the DS Scheduling System (DSS), DS database (DB), and Control and Monitoring (C&M) designed to monitor and manage overall SDS actions. DR hosts the Moving Object Detection Program (MODP), Asteroid Spin Analysis Package (ASAP) and Data Reduction Control & Monitor (DRCM). MODP and ASAP conduct data analysis while DRCM checks if they are working properly. The functions of SDS is three-fold: (1) DSS plans schedules for three KMTNet stations, (2) DR performs data analysis, and (3) C&M checks whether DSS and DR function properly. DSS prepares a list of targets, aids users in deciding observation priority, calculates exposure time, schedules nightly runs, and archives data using Database Management System (DBMS). MODP is designed to discover moving objects on CCD images, while ASAP performs photometry and reconstructs their lightcurves. Based on ASAP lightcurve analysis and/or MODP astrometry, DSS schedules follow-up runs to be conducted with a part of, or three KMTNet telescopes.