• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.649-658
• /
• 2006

Recently, Software Development was applied to new-approach methods as a various form : client-server system and web-programing, object-orient concept, distributed development with a network environments. On the other hand, it be concerned about the distributed development technology and increasing of object-oriented methodology. These technology is spread out the software quality and improve of software production, reduction of the software develop working. Futures, we considered about the distributed software development technique with a many workstation. In this paper, we discussed optimal release problem based on a stochastic differential equation model for the distributed Software development environments. In the past, the software reliability applied to quality a rough guess with a software development process and approach by the estimation of reliability for a test progress. But, in this paper, we decided to optimal release times two method: first, SRGM with an error counting model in fault detection phase by NHPP. Second, fault detection is change of continuous random variable by SDE(stochastic differential equation). Here, we decide to optimal release time as a minimum cost form the detected failure data and debugging fault data during the system test phase and operational phase. Especially, we discussed to limitation of reliability considering of total software cost probability distribution.

• Asia Marketing Journal
• /
• v.8 no.1
• /
• pp.105-132
• /
• 2006

The major purpose of this study is to investigate the impact of environmental uncertainties and logistics resources capabilities mediated by relational norms and logistics services on logistics performance in the industrial products. The 272 data were collected from the key informants who were working at the logistics-related departments in the H Heavy Industries & Construction and HSD Engine. The following results were verified using structural equation modeling. First, environmental uncertainties such as dynamism and heterogeneity unexpectedly had insignificant effects on relational norms such as information exchange and flexibility and logistics services such as product availability and on-time delivery. Second, logistics resource capabilities showed unique effects based upon its component's characteristics. For example, Logistics Information Systems did not have direct impact on logistics services but had indirect effect on logistics services via relational norms. On the other hand, logistics resources such as logistics specific assets and transportation service competencies had direct impact on logistics services but not on relational norms. Third, relational norms between transaction partners significantly affected logistics services but had insignificant effects on logistics performance such as logistics costs reduction and delivery qualities. Fourth, consistent with several studies, excellent logistics services between industrial purchaser and suppliers based upon relational norms did have significant effect on logistics performance such as delivery consistency and delivery qualities. Finally, the empirical results in this study could be strategic logistics management guidelines based upon the theoretical relationships among the environmental uncertainties, logistics information systems, logistics resources, relational norms, logistics services, and logistics performance.

• Journal of Korean Public Health Nursing
• /
• v.7 no.2
• /
• pp.53-66
• /
• 1993

By this time, a few of previous studies of factors related to separation from their jobs and job satisfaction only have dealt with the separation rate. the cause of separation and related factors that induce job satisfaction and incentive factors, the actualities of morale some suggestions for reduction of the separation rate. This study is attempted to determine factors that have effect on job satisfaction of national hospital nurses. and to proide information and materials for the development of the administration of nursing through the appreciation of factors influencing on job satisfaction between isolated ward nurses and general ward nurses working at national hospitals. 185 nurses of national hospitals responsed th this study, and were divided into two groups. Group 1: 57 nurses working at isolated wards for tuberculosis patients and Group 2 : 128 nurses at general wards. Relevant data were collected from August, 5, 1992 through August 20, 1992. The questionnaire consisted of 8 genalized items and 4 items concerning job satisfaction. The collected data were processed with SPSS, and the relationship among vaviables was analyzed by means of $X^2-test$, Pearson Correlation, Multiple Regression. The results of this study are as follows: 1. There is no significant difference between two groups in terms of generalized items. Age distributions show $44.3\%$ under the category of less than 34. and $55.7\%$ under the category more than 35, $19.3%$ was single and $74.6\%$ was married respectively. 2. $79.4\%$ of the nurses have the desire to have in-service education under the satisfactory physical environments such as welfare system, accommodating structures and facilities, instruments or management systems of the hospital, but under the category of unsatisfactory circumstances, $60.3\%$ have the intention of having in- service education. The concern in terms of in-service education shows statistically significant difference between two groups $(X^2=8.85,\;p<0. 05)$. This result accepts the hypothesis that good physical environments could intensify interests in service education. 3. The extent of satisfaction related to psychological environments is heightend according to good physical environments. In result, the hypothesis that the extent of satisfaction in terms of physical environments could raise satisfaction about psychological environment is accepted. 4. In the light of the extent of satisfaction about physical environments, $33.3\%$ of isolated ward nurses are satisfied with physical environments, but only $11.7\%$ of general ward nurses are satisfied. $(X^2=10.88,\; p<0.01)$. This result shows that the satisfaction degree about phusicalenvironments of isolated war nurses was higher than that of general ward nurses in spite of high physical and psychological risks due to exposure to infection. Consequently. the hypothesis was rejected that the satisfaction degree about physical environments would be lower in isolated ward nurses than in general ward nurses. 5. The fact that $87.7%$ of isolated ward nurses took interest in service education and $53.19\%$ of general ward nurses took interest in service education demonstrats that isolated ward nurse have more interest in service education than gerneral ward nurses. The result shows that the hypothesis is accepted that isolated ward nurses would have mor interests in service education than general ward nurses. 6. In the extent of satisfaction about physical environments such as morale human relationship promotion, there is no significant difference between two groups in terms of statistics. The hypothesis is rejected that satisfaction about psychologic environments would be high in isolated ward nurses than in general ward nurses. In conclusion. factors influencing on job satisfaction are considered to have effect on. another, and also interdisciplinary amelioration of factors accompanied with systematic inter cooperative investigation is necessary.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.5
• /
• pp.13-21
• /
• 2019

There are many cuts or natural rock slopes that remain stable for a long time in the natural environment with steep slopes ($65^{\circ}$ to $85^{\circ}$). In terms of design practice, the rock mass consisting of similar rock condition and geological structures is defined as a good continuum rock slope, and during the process of decision making angle of this rock slope, it will be important to establish the geotechnical properties estimating method of the continuum rock on the process of stability analysis in the early stages of design and construction. In this study, the stability analysis of a good continuum rock slope that can be designed as a steep slope proposed a practical method of estimating the shear strength by induced from the Hoek-Brown failure criterion, and in addition, the design applicability was evaluated through the stability analysis of steep rock slope. The existing method of estimating the shear strength was inadequate for practical use in the design, as the equivalent M-C shear strength corresponding to the H-B envelope changes sensitively, even with small variations in confining stress. To compensate for this problem, it was proposed to estimate equivalent M-C shear strength by iso-angle division method. To verify the design applicability of the iso-angle division method, the results of the safety factor and the displacement according to the change in angle of the cut slope constructed at the existing working design site were reviewed. The safety factor is FS=16~59 on the 1:0.5 slope, FS=12~52 on the 1:0.3 slope, most of which show a 10~12 percent reduction. Displacement is 0.126 to 0.975 mm on the 1:0.5 slope, 0.152 to 1.158 mm on the 1:0.3 slope, and represents an increase of 10 to 15%. This is a slightly change in normal proportion and is in good condition in terms of stability. In terms practical the working design, it was confirmed that applying the shear strength estimated by Iso-angle division method derived from the H-B failure criterion as a universal shear strength for a good continuum rock mass slope was also able to produce stable and economic results. The procedure for stability analysis using LEM (Limit Equilibrium Analysis Method) and FEM (Finite Element Analysis Method) will also be practical in the rock slope where is not distributed fault. The study was conducted by selecting the slope of study area as a good rock condition, establishing a verification for which it can be applied universal to a various rock conditions will be a research subject later on.

• Korean Journal of Social Welfare
• /
• v.58 no.3
• /
• pp.135-168
• /
• 2006

This study reviewed pension reform's overall characteristic and(anticipated) positive negative effect in OECD countries's and then analysed middle-old age's retirement transition and determinants of full/gradual retirement through the $3{\sim}7th$ Korea Labor and Income Panel considering that Korea has been aging society quickly and it is necessary to suggest not only solution of early retirement and working age reduction but also pension reform. As a result of this study, about 1/4 of 50 years and older have been continuing to work through various pathways after retirement and 98% among fully retired older who passed by re-employment step of occupational status including retirement are still searching for jobs. This showed that it is also inappropriate to typical retirement concept itself on the lines of labour market participation in Korea and part-time/temporary work or self-employment have been used by means of alternatives of maintaining works for middle-old ages. However, the duration of changed occupational status of gradual retirees is mostly only $1{\sim}2$ years. Therefore it is necessary to support the gradual retirement to minimize a term of income insecurity and promote the work of the old ages who have will and capacity of work. Most of all, partial pension system which is main program of gradual retirement, should make the rules that beneficiaries are those who age less than pensionable age and benefit levels should be actuarial fairness together with pension system and provide substantial help. But, the introduction of partial pension system is not the only way to solve and needs overall social economic approach. Especially guarantee the increase of quantitative qualitative employment for middle-old ages linking labor market policy and supporting gradual retirement not ought to be abused to force the part time works and early retirement route against their own will.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1976

This paper is the third one of the study on balanced type oscillating mole-drainer, the first one was presented in No 9. Gyeongsang College Report and the second one in Vol. 17, No.4 of the KSAE. In the first part of this study, the characteristics of traction forces between the nonoscillating earth working equipments and oscillating ones was compared. A model of the balanced type oscillating mole-drainer, which composed of a mechanism that may reduce the machine vibration, was designed following the dimensional analysis and similitude technique. The model test was carried out to clarify the balancing mechanism of the oscillating parts and other parts of the machine. In the light of the results from the model tests, a prototype machine was made for experimental purpose. Results from the field test by a reported in the near future. In the second report, the model tests were carried out under the same soil conditions, i.e, . oscillating frequency, running velocity, and oscillating amplitude, etc. It was clear that use of balanced type oscillating model could substantially reduce the vibration of the whole system of the machine, when compared with the nonoscillating type model. In this paper(the third report), results of investigation on the traction force, power requirement, and moment. etc, is presented. Analysis of variance technique was used for analyzing the effect of the frequency, amplitude, and running velocity on the draft force, torque, power requirements, and moments. The results obtained from the model tests are as follows, 1) By practicing a balanced-type oscillating mole-drainer, it was possible to reduce the traction resistance by 55.1-61. 2 percent of traction resistance, however, was 1.75 - 1.95 times greater than the value of resistance which was induced by use of a mole-drainer with single bullet. The resistance of rear shank against soil was considered as a main causing factor of the above results. 2) As the oscillation frequency was increased, the traction resistance was decreased. Considering on the effect of oscillation the greater the amplitude, and the slower the running velocity was, the greater the reduction ratio of traction resistance was. 3) The ratio of the traction resistance of oscillating mole-drainer to that of non-oscillating one could be represented as a function of dimensionless variable (V/$Af$). The results from the tests were well agreed with the reported results from the experim ents on oscillation plow or hoe. 4) By taking a lower value of (V/$Af$), reducing the traction resistance was possible. This fact meant, however, that the efficiency of mole drain practice would be lower. 5) It was experimentally confirmed under the same condition of soil that the variable (R/$rD1^3$) could be represented as a function of a variable($V^2/gD$) when a non\ulcornerocillating mole-drainer was used. 6) When a oscillating mole-drainer was used, the variable(R/$rD_1^{3}$) could be represented as a function of two variables ($v^2/gD_1$) and (V^2/gD_1$). 7) The torque was not affected by a change of frequency. However, a relation of proportionality existed between torque and amplitude, running velocity, and ratio of bullet diameter. When a balanced type oscillating mole-drainer with two bullets was used, torque was increased by 52.8-78. 4 percent and total power requirement was also increased. 8) Total power requirement was increased linearly in accordance with the increasing frequency, 41.96 percent of total power was used for oscillating action. The magnitude of total power requirement was 1. 8-9. 4 times greater than that of a non-oscillating mechanism. In the view point of power requirement, it was not advisable to increase the frequency, amplitude, running velocity, and ratio of bullet diameter at the same time. 9) Only the positive moment occured in the rear shank. Change of the diameter of a rear bullet, could not affect the balancing against the soil resistance. It was necessary for rear bullet to have a large resistance against soil only when the rear bullet was in backward motion. 10) Within an extent of the experimental base, optimum limits for several design factors were A=0.5cm, $f$=22.5Hz, V=O. 05m/sec, and $\lambda$=1.0 By adapting these values traction resistance was reduced by 40 percent and vibration acceleration wa s reduced by 60 percent. Even though the total , power requirements for operating a balanced type oscillation mechanism was greater ~than that of non-oscillating one, using a oscillating mechanism would be more effective. Because a balanced type oscillating mechanism is used, tractive resistance will be reduced and then the lighter . tractive equipment could be used.

• Journal of National Security and Military Science
• /
• s.9
• /
• pp.313-340
• /
• 2011

The National Defense Reformation bill of "National Defense Reformation 2020" which have been constantly disputed and reformed by the government went through various levels of complementary measures after the North Korean sinking on the Republic of Korea (ROK) Naval Vessel "Cheonan". The final outcome of this reform is also known as the 307 Plan and this was announced on the 8th March. The reformed National Defense Reformation is to reduce the number of units and military personnel under the military structure reformation. However, in order for us to undertake successful National Defense Reformation, the use of privatized civilian resources are essential. Therefore according to this theory, the ROK Ministry of National Defense (MND) have selected the usage of privatized resources as one of the main core agenda for the National Defense Reformation management procedures, and under this agenda the MND plans to further expand the usage of private Especially the MND plans to minimize the personnel resources applied in non-combat areas and in turn use these supplemented personnel with optimization. In order to do this, the MND have initiated necessary appropriate analysis over the whole national defense section by understanding various projects and acquisition requests required by each militaries and civilian research institutions. However for efficient management of privatized civilian resources, first of all, those possible efficient private resources which can achieve optimization will need to be identified, and secondly continuous systematic reinforcements will need to be made in private resource usage legislations. Furthermore, we would need to consider the possibility of labor disputes because of privatization expansion. Therefore, full legal and systematic complementary measures are required in all possible issue arising areas which can affect the combat readiness posture. There is another problem of huge increase in operational expenses as reduction of standby forces are only reducing the number of soldiers and filling these numbers with more cost expensive commissioned officers. However, to overcome this problem, we would need to reduce the number of positions available for active officers and fill these positions with military reserve personnel who previously had working experiences with the related positions (thereby guaranteeing active officers re-employment after completing active service). This would in tum maintain the standards of combat readiness posture and reduce necessary financial budgets which may newly arise. The area of maintenance, supply, transportation, training & education duties which are highly efficient when using privatized resources, will need to be transformed from military management based to civilian management based system. For maintenance, this can be processed by integrating National Maintenance Support System. In order for us to undertake this procedure, we would need to develop maintenance units which are possible to be privatized and this will in turn reduce the military personnel executing job duties, improve service quality and prevent duplicate investments etc. For supply area, we will need to establish Integrated Military Logistics Center in-connection with national and civilian logistics system. This will in turn reduce the logistics time frame as well as required personnel and equipments. In terms of transportation, we will need to further expand the renting and leasing system. This will need to be executed by integrating the National Defense Transportation Information System which will in turn reduce the required personnel and financial budgets. Finally for training and education, retired military personnel can be employed as training instructors and at the military academy, further expansion in the number of civilian professors can be employed in-connection with National Defense Reformation. In other words, more active privatized civilian resources will need to be managed and used for National Defense Reformation.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.970-976
• /
• 2011

Strip tiller equipment was developed to reduce soil erosion in the slope land for highland agricultural area. The equipment consisted of 4 rows strip tillage device and fertilizer applicator. The field was tilled in 10 cm width and in 10 cm depth by the equipment, of which tilled surface was 16.7% of full-width tillage. The working time and fuel consumption of the equipment were $3.8hours\;ha^{-1}$ and $24.4L\;ha^{-1}$ respectively, which were 59% and 74% less than those of the conventional tillage. Fertilizer efficiency of the equipment in cultivation of Chinese cabbage was 1.7, 1.6 and 1.5 times higher in nitrate, phosphorous and potassium respectively, than conventional tillage. When the equipment was used after covering of rye residue, the quantity of runoff was 49~67% lower than the conventional tillage. And the quantity of soil loss were 1.3 and $0.2Mg\;ha^{-1}$ at right after and 30 days after planting of Chinese cabbage respectively, while 11.5 and $4.1Mg\;ha^{-1}$ in conventional tillage. In conclusion, the strip tillage equipment developed in this study can be applicable to slope land, so that soil loss of 90% can be reduced.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.110-114
• /
• 2014

Purpose: The advancement in PET/CT test devices has decreased the test time and popularized the test, and PET/CT tests have continuously increased. However, this increases the exposure dose of radiation workers, too. This study aims to measure the radiation shielding rate of $^{18}F-FDG$ with a strong energy and the shielding effect when worker wore an apron during the PET/CT test. Also, this study compared the shielding rate with $^{99m}TC$ to minimize the exposure dose of radiation workers. Materials and Methods: This study targeted 10 patients who visited in this hospital for the PET/CT test for 8 days from May 2nd to 10th 2013, and the $^{18}F-FDG$ distribution room, patient relaxing room (stand by room after $^{18}F-FDG$ injection) and PET/CT test room were chosen as measuring spots. Then, the changes in the dose rate were measured before and after the application of the APRON. For an accurate measurement, the distance from patients or sources was fixed at 1M. Also, the same method applied to $^{99m}TC's$ Source in order to compare the reduction in the dose by the Apron. Results: 1) When there was only L-block in the $^{18}F-FDG$ distribution room, the average dose rate was $0.32{\mu}Sv$, and in the case of L-blockK+ apron, it was $0.23{\mu}Sv$. The differences in the dose and dose rate between the two cases were respectively, $0.09{\mu}Sv$ and 26%. 2) When there was no apron in the relaxing room, the average dose rate was $33.1{\mu}Sv$, and when there was an apron, it was $22.3{\mu}Sv$. The differences in the dose and dose rate between them were respectively, $10.8{\mu}Sv$ and 33%. 3) When there was no APRON in the PET/CT room, the average dose rate was $6.9{\mu}Sv$, and there was an APRON, it was $5.5{\mu}Sv$. The differences in the dose and dose rate between them were respectively, $1.4{\mu}Sv$ and 25%. 4) When there was no apron, the average dose rate of $^{99m}TC$ was $23.7{\mu}Sv$, and when there was an apron, it was $5.5{\mu}Sv$. The differences in the dose and dose rate between them were respectively, $18.2{\mu}Sv$ and 77%. Conclusion: According to the result of the experiment, $^{99m}TC$ injected into patients showed an average shielding rate of 77%, and $^{18F}FDG$ showed a relatively low shielding rate of 27%. When comparing the sources only, $^{18F}FDG$ showed a shielding rate of 17%, and $^{99m}TC$'s was 77%. Though it had a lower shielding effect than $^{99m}TC$, $^{18}F-FDG$ also had a shielding effect on the apron. Therefore, it is considered that wearing an apron appropriate for high energy like $^{18}F-FDG$ would minimize the exposure dose of radiation workers.