• Journal of Nutrition and Health
• /
• v.42 no.1
• /
• pp.5-13
• /
• 2009

Mushrooms have become a largely untapped source of powerful new pharmaceutical products that poses anti-inflammatory, and antimutagenic, and antioxidant activities. The antioxidant effects of the mushroom may be partly explained by protecting cellular components against free radical. The aim of this study was to investigate the protective effect of chaga mushroom against diabetes, via the mitigation of oxidative stress and reduction of blood glucose, in streptozotocin-induced diabetic rats. Rats were rendered diabetic by intravenous administration of STZ through tail at a dose of 50 mg/kg. Animals were allocated into four groups with 8 rats each. The control and diabetic control group were fed with standard rat feed. The other diabeic groups, the low chaga extract group and the high chaga extract group were fed ad libitum using 0.5 g/kg and 5 g/kg of chaga mushroom extract, respectively, for 4 weeks. The blood glucose levels in the two chaga extract groups showed a tendency to decrease but did not reach statistical significance after the supplementation. Leukocyte DNA damage, expressed as tail length, was found to be significantly lower in the high chaga extract group than in the diabetic control group (p > 0.05). Plasma level of total radical-trapping antioxidant potential (TRAP) was tend to be higher in the high chaga extract group compared with the diabetic control group. Erythrocyte antioxidant enzyme activities of two groups did not differ. Although we did not obtain beneficial effect on lowering blood glucose levels in the STZ-induced diabetic rats, this results suggest that the chaga mushroom extracts may initially act on protecting endogenous DNA damage in the short-term experiment.

• Journal of Nutrition and Health
• /
• v.55 no.3
• /
• pp.321-329
• /
• 2022

Riboflavin and its derivatives, flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD), are key components of mitochondrial energy metabolism and oxidation-reduction reactions. Proposed dietary reference intakes for Koreans (KDRIs), that is, estimated average requirements (EARs), for riboflavin, based on current knowledge of riboflavin and riboflavin derivative levels, and glutathione reductase activity, are 1.3 mg/d for men aged 19-64 years and 1.0 mg/d for women aged 19-64 years. By applying a coefficient of variance of 10%, reference nutrient intakes (RNIs) were set at 1.5 mg/d for men aged 19-64 years and 1.2 mg/d for women aged 19-64 years. Likewise, EARs and RNIs of riboflavin intake were proposed for all age groups and women in specific life stages such as pregnancy. Mean adult riboflavin intake for adults aged ≥ 19 years was 1.69 mg/d in Korea National Health and Nutrition Examination Survey (KNHANES) 2020, which was 124.9% of EAR according to the 2020 KDRIs. In the 2015-2017 KNHANES study, the mean riboflavin intake from foods and supplements was 2.79 mg/d for all age groups, and 32.7% of individuals consumed less riboflavin than EAR according to the 2020 KDRIs. For those that used supplements, mean intakes were 1.50 mg/d for riboflavin from foods, 10.26 mg/d from supplements, and 11.76 mg/d from food and supplements, and 5.5% of individuals consumed less riboflavin than EAR. Although the upper limit of riboflavin has not been established, the merits of increasing supplement use warrant further consideration. Also, additional epidemiologic and intervention studies are required to explore the role of riboflavin in the etiology of chronic diseases.

• Resources Recycling
• /
• v.33 no.4
• /
• pp.47-61
• /
• 2024

As a recycling technology for recovering zinc contained in large amounts in electric arc furnace dust (EAFD), the most commercialized technology in the world is the Wealz Kiln Process. The Wealz Kiln Process is a process in which components such as Zn and Pb in EAFD are reduced/volatile (endothermic reaction) in high-temperature Kiln and then re-oxidized (exothermic reaction) in the gas phase and recovered in the form of Crude zinc oxide (60wt%Zn) in the Bag Filter installed at the rear end of Kiln. In this study, an experimental Wealz kiln was produced to investigate the optimal process variable value for practical application to the recycling process of large-scale kiln on a commercial scale. Additionally, Pellets containing EAFD, reducing agents, and limestone were continuously loaded into Kiln, and the amount of input, heating temperature, and residence time were examined to obtain the optimal crude zinc oxide recovery rate. In addition, the optimal manufacturing conditions of Pellets (drum tilt angle, moisture addition, mixing time, etc.) were also investigated. In addition, referring to the SiO₂-CaO-FeO ternary system diagram, the formation behavior of a low melting point compound, a reaction product inside Kiln according to the change in the basicity of Pellet, and the reactivity (adhesion) with the castable constructed on the inner wall of Kiln were investigated. In addition, in order to quantitatively investigate the possibility of using anthracite as a substitute for Coke, a reducing agent, changes in the temperature distribution inside Kiln, where oxidation/reduction reactions occur due to an increase in the amount of anthracite, the quality of Crude zinc oxide, and the behavior of tar in anthracite were also investigated.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.543-553
• /
• 2023

The current status of domestic a agalmatolite mines in South Korea was investigated with a view to establishing a stable supply of agalmatolite and managing its demand. Most mined agalmatolite deposits were formed through hydrothermal alteration of Mesozoic volcanic rocks. The physical characteristics of pyrophyllite, the main constituent mineral of agalmatolite, are as follows: specific gravity 2.65~2.90, hardness 1~2, density 1.60~1.80 g/cm³, refractoriness ≥29, and color white, gray, grayish white, grayish green, yellow, or yellowish green. Among the chemical components of domestic agalmatolite, SiO₂ and Al₂O₃ contents are respectively 58.2~67.2 and 23.1~28.8 wt.% for pyrophyllite, 49.2~72.6 and 16.5~31.0 wt.% for pyrophyllite + dickite, 45.1 and 23.3 wt.% for pyrophyllite + illite, 43.1~82.3 and 11.4~35.8 wt.% for illite, and 37.6~69.0 and 19.6~35.3 wt.% for dickite. Domestic agalmatolite mines are concentrated mainly in the southwest and southeast of the Korean Peninsula, with some occurring in the northeast. Twenty-one mines currently produce agalmatolite in South Korea, with reserves in the order of Jeonnam (45.6%) > Chungbuk (30.8%) > Gyeongnam (13.0%) > Gangwon (4.8%), and Gyeongbuk (4.8%). The top 10 agalmatolite-producing mines are in the order of the Central Resources Mine (37.9%) > Wando Mine (25.6%) > Naju Ceramic Mine (13.4%) > Cheongseok-Sajiwon Mine (5.4%) > Gyeongju Mine (5.0%) > Baekam Mine (5.0%) > Minkyung-Nohwado Mine (3.3%) > Bugok Mine (2.3%) > Jinhae Pylphin Mine (2.2%) > Bohae Mine. Agalmatolite has low thermal conductivity, thermal expansion, thermal deformation, and expansion coefficients, low bulk density, high heat and corrosion resistance, and high sterilization and insecticidal efficiency. Accordingly, it is used in fields such as refractory, ceramic, cement additive, sterilization, and insecticide manufacturing and in filling materials. Its scope of use is expanding to high-tech industries, such as water treatment ceramic membranes, diesel exhaust gas-reduction ceramic filters, glass fibers, and LCD panels.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.3
• /
• pp.197-201
• /
• 2007

Oil soluble licorice extract(licorice extract) is an officially approved cosmetic component as a whitening ingredient in Korea. The durability of licorice, during which the whitening effect can be maintained in optimum condition, must be accurately defined. Since the cosmetics durability under real condition is relatively longer than its development time. It is needed to predict the real durability interval from the experimental measurement under simulated operating conditions. We analyzed the relationship between the licorice lifetime and the high temperature condition by using Arrhenius equation. We have established the constant stress test with temperature of $50^{\circ}C$, $55^{\circ}C$, and $60^{\circ}C$ condition, within which no formulation change of licorice products is expected for the accelerated stress test. In this paper, the lifetime of licorice in cosmetics was defined as time period for its 10% contents reduction. We observed that the lifetime of licorice is 580 h at $50^{\circ}C$, 319 h at $55^{\circ}C$ and 166 h at $60^{\circ}C$. Using the above experimental data, we obtained the equation for the relationship between the licorice lifetime and temperature as follows; log(lifetime)=-35.0243 + 1.15322$\times$(11604.83/temperature). From this equation, the lifetime of licorice at $25^{\circ}C$ can be estimated as 26 months. The estimated result was verified by measuring full lifetime of licorice. In fact, there was no significant difference between the estimated lifetime and real measurement within 95 % significance level. This study can be applied to other useful cosmetic components for the fast estimation of the exact durability.

• Microbiology and Biotechnology Letters
• /
• v.38 no.4
• /
• pp.420-427
• /
• 2010

A process for manufacturing virally-safe bovine amniotic membrane(BAM) has been developed for biological dressing. BAM was harvested from a healthy bovine placenta, and then the epithelium was removed. The remaining stromal layer was consecutively disinfected with 70% ethanol and 0.05% sodium hypochlorite. The stromal layer was incubated in a decellularization solution containing 0.25%(w/v) trypsin to remove the cellular components. The resulting acelluar BAM was lyophilized to preserve its biochemical and structural integrity. The BAM was packed and exposed to 25 kGy of gamma irradiation for sterilization purpose. Histological, electron microscopical, and biochemical observations showed that the acellualr BAM had intact structural integrity of three dimensional collagen fibers and contained several growth factors, accelerating wound healing, such as EGF (Epidermal growth factor), KGF (Keratinocyte growth factor), and FGF (Fibroblast growth factor). Bovine herpes virus (BHV), bovine viral diarrhoea virus (BVDV), bovine parainfluenza virus type 3 (BPIV-3), and bovine parvovirus (BPV) were chosen as the biological indicators for validation of viral safety of the acellular BAM. Samples from relevant stages of the production process were spiked with each virus and subjected to viral inactivation processes. Viruses were recovered from the samples and then titrated immediately. All the viruses tested were completely inactivated to undetectable levels within 1 h of 70% ethanol treatment. Enveloped viruses such as BHV, BVDV, and BPIV-3 were more effectively inactivated than BPV by 0.05% sodium hypochlorite treatment. BHV, BVDV, and BPIV-3 were completely inactivated to undetectable levels by 25 kGy of gamma irradiation. Also BPV was effectively inactivated by 25 kGy of gamma irradiation. The cumulative log reduction factors of BHV, BVDV, BPIV-3, and BPV were ${\geq}$13.30, ${\geq}$14.32, ${\geq}$15.22, and ${\geq}$7.57, respectively. These results indicate that the production process for acelluar BAM has a sufficient virus-reducing capacity to achieve a high margin of the virus safety.

• Journal of Animal Science and Technology
• /
• v.49 no.3
• /
• pp.359-368
• /
• 2007

Holstein cows(n=12) were assigned to one of three diets containing control diet and diets containing a microbial culture, 50ml(T1) and 100ml(T2) SDN(R)(amicrobial culture), per day. The basal diet containing concentrate mixture, corn silage and timothy hay were fed midlactating cows for 12 weeks. Milk production tended to be higher for cows fed T2 diet (20.8kg/day) than fed T1(19.7kg/d) and control diet (19.2kg/day).  There was a tendency of an increase in 4% FCM for cows fed T2 diet(19.6kg/day) than T1(18.8kg/d) and control diet(18.4kg/day). Milk components were not found to be different between cows fed control diet and SDN(R) diets. There was a tendency an increase in milk protein for cows fed control diet(3.43%) compared with microbial diets, T1 and T2(3.08% and 3.20%). However, milk protein production was not significantly different between control diet(0.65kg/d) and T1(0.61kg/d) or T2(0.67kg/d). Somatic cell counts for cows fed T1(72,000) and T2(60,000/ml) were lower than cows fed control diet (108,000/ml) (P<0.05). In conclusion, the cows that were fed diets containing SDN(R) as a microbial culture resulted a tendency of an increase in milk production and a reduction of somatic cell counts which indicates improved milk quality and hygiene.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.1102-1107
• /
• 2003

To study the effects of substances in paeonia seeds (Paeonia lactiflora Pall.) on lipid metabolism, crude methanol extract and secondary ether-soluble fraction out of defatted methanol extract and trans-resveratrol were prepared from the seeds and added to 0.5% (w/w) cholesterol diets for rats. Male Sprague-Dawley rats weighing 120$\pm$11 g were divided into six experimental groups: control group with no extra supplement, 0.1% (MP1) and 0.2% methanol extract (MP2) supplemented groups, 0.05% (EP1) and 0.1% ether-soluble fraction (EP2) supplemented groups and 0.02% resveratrol supplemented group. Experimental diets were fed ad libitum to the rats for 3 weeks. Body weight gains and food efficiencies were not different among the six experimental groups. Relative liver weights were lower in EP2 group compared to those in control group, but serum GOT and GPT levels of paeonia seed groups including trans-resveratrol group were not different from those of the control group. Serum total cholesterol levels reduced in EP2 and resveratrol groups but HDL-/total cholesterol ratios significantly increased in the four paeonia groups except EP1 group compared with the control group and serum triglyceride level lowered only in EP2 group than that of the control. However, liver cholesterol levels lowered in the five paeonia groups but triglyceride level lowered in MP2, EP1, EP2 groups than that of the control group. Fecal cholesterol excretion significantly increased in MP2, EP1, and EP2 groups than that of the control group, but bile acid excretions were not changed except that a reduction in EP2 group. These results suggest that paeonia seeds contain substances improving serum lipid status mostly via HDL pathway and resveratrol as monomer is one of the effective components but others including resveratrol oligmer are involved in the lipid improving effect.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.99-107
• /
• 2024

Along with economic growth and industrial development, there is an increasing demand for various electronic components and device production of semiconductor, SMT component, and electrical battery products. However, these products may contain foreign substances coming from manufacturing process such as iron, aluminum, plastic and so on, which could lead to serious problems or malfunctioning of the product, and fire on the electric vehicle. To solve these problems, it is necessary to determine whether there are foreign materials inside the product, and may tests have been done by means of non-destructive testing methodology such as ultrasound ot X-ray. Nevertheless, there are technical challenges and limitation in acquiring X-ray images and determining the presence of foreign materials. In particular Small-sized or low-density foreign materials may not be visible even when X-ray equipment is used, and noise can also make it difficult to detect foreign objects. Moreover, in order to meet the manufacturing speed requirement, the x-ray acquisition time should be reduced, which can result in the very low signal- to-noise ratio(SNR) lowering the foreign material detection accuracy. Therefore, in this paper, we propose a five-step approach to overcome the limitations of low resolution, which make it challenging to detect foreign substances. Firstly, global contrast of X-ray images are increased through histogram stretching methodology. Second, to strengthen the high frequency signal and local contrast, we applied local contrast enhancement technique. Third, to improve the edge clearness, Unsharp masking is applied to enhance edges, making objects more visible. Forth, the super-resolution method of the Residual Dense Block (RDB) is used for noise reduction and image enhancement. Last, the Yolov5 algorithm is employed to train and detect foreign objects after learning. Using the proposed method in this study, experimental results show an improvement of more than 10% in performance metrics such as precision compared to low-density images.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.317-328
• /
• 2019

In this work, we investigated clay and raw materials from China (black clay, red clay, white clay) and Korea (Cheonan clay, Obu clay) used for the manufacture of porcelain products. According to chemical analysis results, feldspar components containing CaO, K₂O, Na₂O and quartz are found in clay materials besides primary clay such as kaollinte, for the clay materials from Korea, which is found more in clay materials from Korea than from China. For the Fe₂O₃ content, governing whiteness of porcelain products, more iron oxide (> 5 %) is found in Korean clays (Cheonan clay, obu clay, red clay) compared to those form China (black, white clay). Through X-ray diffraction analysis, kaolinite and Halloysite are found to be main phases for all the raw materials and second phases such as quartz and pyrophyllite are found. Using these clay materials, raw materials for porcelain products were produced, and the physicochemical properties were investigated for sintered samples. Absorption rate is in order of Baekja-A < Baekja-B < Yeonbuncheong < Jinbuncheong < Cheongja, and the sample, sintered at 1250℃ in reductive atmosphere, exhibits the lowest absorption rate. Comparing the color of the sintered samples, the samples sintered in oxidative atmosphere (L^* value: 86~95 %) show higher whiteness value than those sintered in reductive atmosphere (L^* value: 81~93 %). For the Cheongja and Buncheong, the samples sintered in reductive atmosphre shows higher whiteness, L^* values, and low a^*/b^* value, which is due to reduction of iron oxide (Fe₂O₃).