• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.131-141
• /
• 2004

This study deals with the procedure of safety improvement, productivity increase, and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind, the necessity, and the concept of preventive maintenance, and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss, comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.1
• /
• pp.29-36
• /
• 2011

This study analyzed the convenience and productivity before and after adopting self-propelled power transportation devices to the harvest and transportation of fruit and vegetable products in the Gyeongbuk region, by applying the REBA and RULA techniques. In the REBA analysis, the work risk was low with 4~6 points before adoption which became 2~3 points after adoption. As for the RULA analysis, work loading appeared to have decreased with 6~7 points before adoption which became 3~4 points after adoption. The annual work time reduction was about 48~179 hours while labor costs were reduced to 364~1,345 thousand won annually. This indicated a labor cost reduction effect of about 10~15%. Therefore, the adopted self-propelled power transportation devices appeared to prevent musculo skeletal diseases of the human body and also improve productivity even after using it for long hours according to the REBA, RULA measures level.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.05a
• /
• pp.225-230
• /
• 2005

A study is for the approach that we could reduce the logistics costs through uprising the efficiency, complying to the demand in time, stock management based on the general production plan in the point of SCM. We will take following steps to get the goal. First, we will overview the physical distribution expenses annually. Second, will find the main cause of optimal load loss by improper container and lack of delivery flexibility to the demand. Third, the goal will be inferred through the fast information share based on organic relationship, the establishment of general production plan, the improvement of stock management plan. By way of this process, it can be accomplished expense reduction as well as flexible establishment of the reduction of worker's load.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.2
• /
• pp.41-56
• /
• 2005

A study is for the approach that we could reduce the logistics costs through uprising the efficiency, complying to the demand in time, stock management based on the general production plan in the point of SCM. We will take following steps to get the goal. First, we will overview the physical distribution expenses annually. Second, will find the main cause of optimal load loss by improper container and lack of delivery flexibility to the demand. Third, the goal will be inferred through the fast information share based on organic relationship, the establishment of general production plan, the improvement of stock management plan. By way of this process, it can be accomplished expense reduction as well as flexible establishment of the reduction of worker's load.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.145-154
• /
• 2003

By optimizing the radiation protection the collective dose and individual dose could be reduced during YGN #4 $5^{th}$ outage in 2001. The collective doses for the two high radiation jobs decreased to 85% and 65% of expected doses. The proportion of workers with low dose (below 1mSv) exposure increased 4% while the proportion of workers with over 3mSv and 5mSv exposure are decreased to 2%, 1% respectively. But none is exposed over 8mSv for the annual dose. To aid decision of utilizing the robot, cost- benefit analysis was performed and reasonable point was proposed to use the robot. For the first time job, repeated ALARA meeting and mock up training were implemented to set up working procedure by identifying the trouble. To easily set up standard procedure, mockup process was videotaped and reviewed during ALARA meeting. Monitoring is a good approach to chase radiological working condition such as working time, dose rate. behavior of workers, especially for high radiation work. Those data were estimated and adjusted from the stage of work planning to mock up. At the stage of actual work the monitoring data were compared to the estimation and recorded to database. This database will not only be used as a powerful tool for dose optimization at the following outage but also as a guideline to dose constraint set up for optimization for each specific situation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.373-376
• /
• 2001

In this paper to cope with the reduction of products life-cycle as the variety of products along with the various demands of consumers, a virtual simulator is developed to make the changeover of manufacturing line efficient to embody a virtual simulation similar to a real manufacturing line. The developed virtual simulator can design a layout of a factory and make the time scheduling. Every factory has one simulator so that one product can be manufactured in the factories to use them as virtual factories. We suggest a scheme that heightens the ability to the diversity of manufacturing models by making the information of manufacturing lines and products models to be shared. The developed system embodies a virtual manufacturing line on the simulation using various manipulators and work cells as manufacturing components. we develop a virtual simulator system on Window 98/NT environment of Microsoft, operating system using of the greater part of PC user. Window program have a merit making GUI environment that programmer can use without the expert knowledge about hardware. A suer with the simulator can utilize an interface that makes one to manage the separate task process for each manufacturing module, change operator components and work cells, and easily teach tasks of each task module.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.581-590
• /
• 2008

A SWP method is a revolutionary dewatering method. The conventional dewatering method, deep-well method, had ever occurred a civil appeal caused by the well depletion in compliance with the reduction of the groundwater level over a wider area considerably by the deep-well pumping from homogeneous sand-layer ground for a dry-work, while pump groung excavation working in Sendai city, Japan 10 years ago. it'd developed with the problematic proposal to find the new method which can lower the groundwater level only within the sheet pile without any reduction of groundwater outside of the sheet pile and until currently steady improvement came. It's been confirmed with plenty of executional results that there was almost no decreasing of water-level from surroundings, over so many construction-sites including vertical shafts which completely does not enter into non-water permeable layer and pumping ground etc. The SWP method in this time has been introducing initially and carried into a the execution tentatively at a construction-site and made a various result get through the execution.

• Human Ecology Research
• /
• v.53 no.1
• /
• pp.49-66
• /
• 2015

This study analyzes the effects of women's labour force participation and work-family reconciliation support on life-cycle fertility in Korea. The analysis is based on the longitudinal data from Korean Labour and Income Panel Study (KLIPS), which include the available information on life-cycle fertility and employment history. Employing a dynamic model of fertility, we estimated the life-cycle fertility of all the 15-49 years old women considered in this study by using a duration model. The major results of this study were as follows: First, women's labour force participation had a negative effect on the first birth, second birth, and all births (transition to births starting at different parities). Women's employment tended to lengthen the interval between births. Second, the availability of maternal leave had a positive effect on the first birth and all births for working women. Providing maternal leave to working women decreased the opportunity cost of childbearing and in turn, reduced the interbirth interval of women. However, the availability of parental leave had no significant effect on the births of working women. Third, the financial support for childcare had a positive effect on the first birth and all births. The economic support for childcare led to the reduction in the interbirth interval of women by increasing the probability of births. The use of a childcare center for the first child, which substitutes for the time that women needed to take care of their children, classified as time-intensive consumption goods, did not have any effect on the second birth. Fourth, the part-time employment of women had a positive effect on the second birth. A flexible working time schedule tended to decrease the interval between the first and the second births.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.2
• /
• pp.107-114
• /
• 1999

This paper presents an application of artificial neural networks(ANN) to assess the dynamic security of power systems. The basic role of ANN is to provide assessment of the system's stability based on training samples from off-line analysi. The critical clearing time(CCT) is an attribute which provides significant information about the quality of the post-fault system behaviour. The function of ANN is a mapping of the pre-fault, fault-on, and post-fault system conditions into the CCT's. In previous work, a feed forward neural network is used to learn this mapping by using the generation outputs during the fault as the input data. However, it takes significant calculation time to make the input data through the network reduction at a fault as the input data. However, it takes significant calculation time to make the input data through the network reduction at a fault considered. In order to enhance the speed of security assessment, the bus data and line powers are used as the input data of the ANN in thil paper. Test results show that the proposed neural networks have the reasonable accuracy and can be used in on-line security assenssment efficiently.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.818-827
• /
• 2008

In this paper, we propose a new noise estimation and reduction algorithm for stationary and nonstationary noisy environments. This approach uses an algorithm that classifies the speech and noise signal contributions in time-frequency bins. It relies on the ratio of the normalized standard deviation of the noisy power spectrum in time-frequency bins to its average. If the ratio is greater than an adaptive estimator, speech is considered to be present. The propose method uses an auto control parameter for an adaptive estimator to work well in highly nonstationary noisy environments. The auto control parameter is controlled by a linear function using a posteriori signal to noise ratio(SNR) according to the increase or the decrease of the noise level. The estimated clean speech power spectrum is obtained by a modified gain function and the updated noisy power spectrum of the time-frequency bin. This new algorithm has the advantages of much more simplicity and light computational load for estimating the stationary and nonstationary noise environments. The proposed algorithm is superior to conventional methods. To evaluate the algorithm's performance, we test it using the NOIZEUS database, and use the segment signal-to-noise ratio(SNR) and ITU-T P.835 as evaluation criteria.