• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.345-350
• /
• 2018

Nanomaterials have considerable potential to solve several key challenges in various electrochemical devices, such as fuel cells. However, the use of nanoparticles in high-temperature devices like solid-oxide fuel cells (SOFCs) is considered problematic because the nanostructured surface typically prepared by deposition techniques may easily coarsen and thus deactivate, especially when used in high-temperature redox conditions. Herein we report the synthesis of a self-regenerated Pd metal nanoparticle on the perovskite oxide anode surface for SOFCs that exhibit self-recovery from their degradation in redox cycle and $CH_4$ fuel running. Using Pd-doped perovskite, $La(Sr)Fe(Mn,Pd)O_3$, as an anode, fairly high maximum power densities of 0.5 and $0.2cm^{-2}$ were achieved at 1,073 K in $H_2$ and $CH_4$ respectively, despite using thick electrolyte support-type cell. Long-term stability was also examined in $CH_4$ and the redox cycle, when the anode is exposed to air. The cell with Pd-doped perovskite anode had high tolerance against re-oxidation and recovered the behavior of anodic performance from catalytic degradation. This recovery of power density can be explained by the surface segregation of Pd nanoparticles, which are self-recovered via re-oxidation and reduction. In addition, self-recovery of the anode by oxidation treatment was confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM).

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권5호
• /
• pp.114-122
• /
• 2007

강구조물의 고력볼트 마찰접합부에 있어서 마찰면의 부식은 장기적으로 마찰력 감소와 접합부 내력저하를 초래한다. 본 연구는 고력볼트 접합부의 부식을 방지하고 소요 역학적 성질을 만족시키기 위해 접합부의 마찰면에 Zn/Al 금속용사 방청처리 한 고력볼트 접합부를 대상으로 마찰면의 표면처리방법과 피막두께를 주요 변수로 하여 인장시험을 실시하였고, 실험으로 부터 마찰면 표면거칠기와 미끄럼계수를 측정하였다. 무도장 샌드블라스트 처리한 접합부 및 샌드블라스트 처리 후 금속용사를 실시한 볼트 접합부의 미끄럼 계수는 국내 규준의 규정 값과 비교하여 동등 이상의 우수한 미끄럼계수 값을 나타냈다.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.29-37
• /
• 2016

본 논문에서는 유한요소해석을 이용하여 복합재 연소관의 금속 보스에 대한 형상 최적설계기법을 제안하였다. 복합재 연소관의 구조 안전성을 위해 연소관 내압에 의한 돔 부위의 섬유응력과 보스 체결 볼트의 응력을 제한하였고, 경량화를 위해 보스의 무게를 목적함수로 설정하였다. 또한 반응표면법을 이용하여 특성치에 대한 반응표면모델을 구축하였다. 그리고 분산분석을 이용해 각 특성치에 대한 설계변수의 유의성을 평가하고 회귀분석을 통해 구축된 모델의 적합성을 검증하였다. 최적화를 위해 순차이차계획법 알고리즘을 이용하였고, 도출된 최적형상에 대한 구조해석을 수행함으로써 제안한 기법의 효용성을 검증하였다.

• 구강회복응용과학지
• /
• 제20권1호
• /
• pp.19-29
• /
• 2004

The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the incisal reduction(2.0mm, 2.5mm, 3.0mm) and axial inclination ($4^{\circ}$, $8^{\circ}$, $12^{\circ}$) of the lower canine. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and a universal testing machine was used to measure the fracture strength. The results of this study were as follows : 1. The fracture strength of the ceramic crown with 3.0mm depth and $12^{\circ}$ inclination was the highest(1377N). Crowns of 2.0mm depth and $4^{\circ}$ inclination had the lowest strength (731 N). 2. There were no significant differences of the fracture strength by axial inclination in same incisal reduction group. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin irrespective of incisal reduction.

• Journal of Electrochemical Science and Technology
• /
• 제7권4호
• /
• pp.298-305
• /
• 2016

The development of non-precious metal based electrocatalysts is highly desired for the oxygen reduction reaction (ORR) as alternates to noble metal based ORR electrocatalysts. Herein, we report mononulcear copper(II) complex $[CuLbpy]ClO_4$ (L=4-[(2-hydroxyphenylimino)methyl]benzoic acid) containing poly(allylamine.HCl) polymer (PAlACuLbpy) as an electrocatalyst for oxygen reduction reaction (ORR). PAlACuLbpy was mixed with poly(acrylic acid) and tetraethylortho silicate to prepare a composite and then deposited on the screen printed electrode surface. The modified electrode (PAlACuLbpy/PCE) is highly stable and showed a quasi-reversible redox behavior with $E_{1/2}=-0.2V$ vs. Ag/AgCl(3 M KCl) in 0.1 M phosphate buffer at pH 7 under argon atmosphere. PAlACuLbpy/PCE exhibited a remarkable ORR activity with an onset potential of -0.1 V vs Ag/AgCl in 0.1 M PB (pH 7) in the presence of oxygen. The kinetics for ORR was studied by rotating disk voltammetry in neutral aqueous medium and the results indicated that the number of electrons involving in the ORR is four and the conversion products are water and hydrogen peroxide.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.78-78
• /
• 2013

Recently, many platinoid metals like platinum and ruthenium have been used as an electrode of microelectronic devices because of their low resistivity and high work-function. However the material cost of Ru is very expensive and it usually takes long initial nucleation time on SiO2 during chemical deposition. Therefore many researchers have focused on how to enhance the initial growth rate on SiO2 surface. There are two methods to deposit Ru film with atomic layer deposition (ALD); the one is thermal ALD using dilute oxygen gas as a reactant, and the other is plasma enhanced ALD (PEALD) using NH3 plasma as a reactant. Generally, the film roughness of Ru film deposited by PEALD is smoother than that deposited by thermal ALD. However, the plasma is not favorable in the application of high aspect ratio structure. In this study, we used a bis(ethylcyclopentadienyl)ruthenium [Ru(EtCp)2] as a metal organic precursor for both thermal and plasma enhanced ALDs. In order to reduce initial nucleation time, we use several methods such as Ar plasma pre-treatment for PEALD and usage of sacrificial RuO2 under layer for thermal ALD. In case of PEALD, some of surface hydroxyls were removed from SiO2 substrate during the Ar plasma treatment. And relatively high surface nitrogen concentration after first NH3 plasma exposure step in ALD process was observed with in-situ Auger electron spectroscopy (AES). This means that surface amine filled the hydroxyl removed sites by the NH3 plasma. Surface amine played a role as a reduction site but not a nucleation site. Therefore, the precursor reduction was enhanced but the adhesion property was degraded. In case of thermal ALD, a Ru film was deposited from Ru precursors on the surface of RuO2 and the RuO2 film was reduced from RuO2/SiO2 interface to Ru during the deposition. The reduction process was controlled by oxygen partial pressure in ambient. Under high oxygen partial pressure, RuO2 was deposited on RuO2/SiO2, and under medium oxygen partial pressure, RuO2 was partially reduced and oxygen concentration in RuO2 film was decreased. Under low oxygen partial pressure, finally RuO2 was disappeared and about 3% of oxygen was remained. Usually rough surface was observed with longer initial nucleation time. However, the Ru deposited with reduction of RuO2 exhibits smooth surface and was deposited quickly because the sacrificial RuO2 has no initial nucleation time on SiO2 and played a role as a buffer layer between Ru and SiO2.

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.9-13
• /
• 2003

Plasma polymerized organic thin films were deposited on Si(100), glass and metal substrates at $25∼100 ^{\circ}C$ using thiophene and toluene precursors by PECVD method. In order to compare physical and electrochemical properties of the as-grown thin films, the effects of the RF plasma power in the range of 30∼100 W and deposition temperature on both corrosion protection efficiency and physical properties were studied. We found that the corrosion protection efficiency ($P_{k}$), which is one of the important factors for corrosion protection in the interlayer dielectrics of microelectronic devices application, was increased with increasing RF power. The highest $P_{k}$ value of plasma polymerized toluene film (85.27% at 70 W) was higher than that of the plasma polymerized thiophene film (65.17% at 100 W), indicating inhibition of oxygen reduction. The densely packed and tightly interconnected toluene film could act as an efficient barrier layer to the diffusion of molecular oxygen. The result of contact angle measurement showed that the plasma polymerized toluene films have more hydrophobic surface than those of the plasma polymerized thiophene films.

• 자원리싸이클링
• /
• 제25권4호
• /
• pp.49-53
• /
• 2016

주석 폐자원으로부터 회수된 주석 조금속을 메탄술폰산 전해액에서 전해정련을 수행하여 고순도 주석을 회수하고자 하였다. 전해정련층 표면형상을 관찰한 결과 주석 전해정련 시 glycol계 유기첨가제를 통해 균일하게 주석이 전착되었고, 수지상 형상 및 박리현상은 발생하지 않았다. 주석 조금속 및 전해정련층의 순도를 ICP-OES로 분석한 결과 주석 조금속은 은, 구리, 납, 니켈 등의 불순물이 함유되어 97.280 wt.%의 주석순도를 나타내었고, 전해정련을 수행 후 순도 분석결과 주석의 순도는 99.956 wt.%으로 증가하였다. 순환 전압전류 시험결과 유기첨가제는 주석 전해정련 시 불순물의 환원반응을 억제 또는 가속시키는 역할을 하는 것으로 판단된다.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.49-55
• /
• 2000

In manufacturing the all-ceramic crown whick look close to natural teeth, the effectiveness of the improved technique is expectected the technique of the heat treatment of gold plating coating die was experimented of a refractory cast model. The following results were obtainde 1. An advantage of build up on east die with out manufacturing veneer, crown, core, or masking(reduction of technical process, and retrenchment of time and money) 2. Esthetically more close to natural teeth than other technique 3. Easy to remove a refractors cast die 4. In manufacturing ceramo-metal crown the enomous effectiveness was obtainde on applying in the areas of cervical margin, the metal surface, and in the treatment of pinhole.

• 한국토양환경학회지
• /
• 제4권1호
• /
• pp.97-108
• /
• 1999

금속 철(Fe$^{0}$ )에 의한 TNT의 환원실험을 회분식 반응조를 사용하여 환원 상태에서 연구하였다. 실험 결과, 환원에 의한 TNT의 농도감소는 유사 1차 반응으로 나타났고 반응상수는 반응조에 첨가한 철의 표면적에 선형적으로 비례하였으며, 교반 속도 60 rpm에서의 반응상수는 0.0981$min^{-1}$m$^{-2}$ L로 측정되었다. Triaminotoluene로 추정되는 최종산물이 용액내에 축적되었다. 철 표면에 흡착된 물질을 용출하기 위하여 acetonitrile혹은 물(인산염 완충액, pH=7.0)로 추출을 시도하였으나 용출되는 물질은 극히 미량이었다. 또한, 용액 내에서 생물학적 분해에서의 주요 중간산물인 aminodinitrotoluenes은 검출되지 않았다. 그러므로, 철에 의한 TNT의 환원시 니트로기의 환원이 순차적으로 발생하여 아미노기를 형성하지 않고, 3개의 니트로기에 대하여 동시에 발생하는 것으로 사료된다. 이에 TNT의 환원 모델을 제시하였다.