• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.97.2-97.2
• /
• 2008

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.225.1-225.1
• /
• 2008

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1021-1022
• /
• 2007

By enforcing skew of permanent magnet, detent force decreases, but lateral force that acts for vertical direction of moving direction occurs. This force deteriorates various performance of PMLSM as that acts to friction force between mover and LM guide. Therefore, in this paper, V skew model is proposed for lateral force's reduction and simulation results are compared to experimental value.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.134-137
• /
• 2007

By enforcing skew of permanent magnet, detent force decreases, but lateral force that acts for vertical direction of moving direction occurs. This force deteriorates various performance of PMLSM as that acts to friction force between mover and LM guide. Therefore, in this paper, V skew model is proposed for lateral force's reduction and simulation results are compared to experimental value.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권5호
• /
• pp.214-220
• /
• 2001

This paper presents the design schemes for the improvement of force characteristics in a controlled permanent magnet liner synchronous motor (Controlled-PM LSM). The dependence of motor performance on the various design schemes, such as the slot shapes, the magnetization patterns of permanent magnet and the skewing, has been investigated in detail by using finite element method (FEM). The analysis results are verified by the experiment that is performed by a testing machine. From this study, it is known that the skewing of the magnet is the most efficient method in the aspects of detent force reduction and higher force density.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.793-798
• /
• 2011

Numerous methods are available for reducing the end-effect force of linear machines. Majority of these methods focus on redesigning the poles or slots. However, these methods require additional manufacturing cost and decrease the power density. The current paper introduces another approach to reduce the end-effect force. The new approach is a method of tuning the input phase current magnitudes individually. According to the proposed method, reduction of the end-effect force could be achieved without redesigning the poles/slots or attaching auxiliary poles/slots. The proposed method is especially applicable when the target motor is very expensive or will be used for a special mission, such as hauling army vehicles equipped with three single-phase inverters. The validity of the suggested method was exemplified by the finite element method with three-phase permanent-magnet linear synchronous motor.

• 전기학회논문지
• /
• 제58권6호
• /
• pp.1105-1109
• /
• 2009

This paper deals with a polynomial thrust equation of a permanent magnet linear synchronous motor that is considered by a skew and overhang effects of permanent magnet. The skew length, the overhang length, the width and height of permanent magnet, the teeth length and air-gap length which effect to the flux density of air-gap are selected as variables of the polynomial thrust equation. Polynomial thrust equation is elicited by the 6 parameters. The results are satisfied that the values by polynomial thrust equation are compared ones by using 3-dimensional finite element analysis and experiment.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.777-783
• /
• 2007

In this paper, we present a novel control approach for linear motor-based transfer systems in which friction reduction and enhancement of control performance are considered. In general, in such systems friction effects from rails and wheels, and internal bearings complicate control scheme since in particularly its dynamics are arbitrarily changed due to mass variation, detent force of motor systems, and gaps among stators. Our control approach is achieved to reduce this undesired friction dynamics using fuzzy system. We construct hybrid control approach for this control system which Is composed of a nominal control and a vertical control against friction. Fuzzy parameter vector is optimally determined from iterative simulation experiments. We demonstrate its superiority via numerical simulations comparing with a traditional control method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.137-139
• /
• 2006

단 1차형 영구자석 선형 동기 전통기(PMLSM)는 디텐트력과 단부력에 의한 큰 토크 리플을 갖는 문제점이 있다. 본 논문에서는 영구자석 선형 통기 전동기의 디텐트력을 줄이기 위해 영구자석의 극수와 전기자의 슬롯수의 비를 변경한 새로운 구조의 단 1차형 영구자석 선형 동기 전동기를 제안하였으며, 단부력을 줄이기 위하며 고정자의 길이 조정 및 챔퍼링을 통하여 영구자석 선형 동기 전동기를 설계하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.165-167
• /
• 2007

영구자석 선형 동기 전동기(PMLSM)는 코깅력과 단부력에 의한 큰 추력 리플을 갖는 문제점이 있다. 본 논문에서는 영구자석 선형 동기 전동기의 디텐트력을 줄이기 위해 영구자석의 극수와 전기자의 슬롯수의 비를 변경한 새로운 구조의 단 1차형 영구자석 선형동기 전동기를 제안하였으며, 단부력을 줄이기 위하여 전기자의 길이 조정 및 챔퍼링을 통하여 영구자석 선형 동기 전동기를 설계하였다.