• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.16-22
• /
• 2008

We fabricated thermally-evaporated 10 nm-Ni/30 nm and 70 nm Poly-Si/200 nm-$SiO_2/Si$ structures to investigate the thermal stability of nickel silicides formed by rapid thermal annealing(RTA) of the temperature of $300{\sim}1100^{\circ}C$ for 40 seconds. We employed for a four-point tester, field emission scanning electron microscope(FE-SEM), transmission electron microscope(TEM), high resolution X-ray diffraction(HRIXRD), and scanning probe microscope(SPM) in order to examine the sheet resistance, in-plane microstructure, cross-sectional microstructure evolution, phase transformation, and surface roughness, respectively. The silicide on 30 nm polysilicon substrate was stable at temperature up to $900^{\circ}C$, while the one on 70 nm substrate showed the conventional $NiSi_2$ transformation temperature of $700^{\circ}C$. The HRXRD result also supported the existence of NiSi-phase up to $900^{\circ}C$ for the Ni silicide on the 30 nm polysilicon substrate. FE-SEM and TEM confirmed that 40 nm thick uniform silicide layer and island-like agglomerated silicide phase of $1{\mu}m$ pitch without residual polysilicon were formed on 30 nm polysilicon substrate at $700^{\circ}C\;and\;1000^{\circ}C$, respectively. All silicides were nonuniform and formed on top of the residual polysilicon for 70 nm polysilicon substrates. Through SPM analysis, we confirmed the surface roughness was below 17 nm, which implied the advantage on FUSI gate of CMOS process. Our results imply that we may tune the thermal stability of nickel monosilicide by reducing the height of polysilicon gate.

• Progress in Medical Physics
• /
• v.11 no.1
• /
• pp.49-57
• /
• 2000

New method about the dose optimization problem in radiation treatment was researched. Since all conditions are more complex and there are more relevant variables, the solution of three-dimensional treatment planning is much more complicate than that of current two-dimensional one. There(ore, in this study, as a method to solve three-dimensional dose optimization problem, the considered variables was minized and researched by reducing the domain that solutions can exist and pre-determining the important beam parameters. First, the dangerous beam range that passes critical organ was found by coordinate transformation between linear accelerator coordinate and patient coordinate. And the beam size and rotation angle for rectangular collimator that conform tumor at arbitrary beam position was also determined. As a result, the available beam position could be reduced and the dependency on beam size and rotation angle, that is very important parameter in treatment planning, totally removed. Therefore, the resultant combinations of relevant variables could be greatly reduced and the dose optimization by objective function can be done with minimum variables. From the above results, the dose optimization problem was solved for the two-dimensional radiation treatment planning useful in clinic. The objective function was made by combination of dose gradient, critical organ dose and dose homogeniety. And the optimum variables were determined by applying step search method to objective function. From the dose distributions by optimum variables, the merit of new dose optimization method was verified and it can be implemented on commercial radiation treatment planning system with further research.

• Composites Research
• /
• v.29 no.4
• /
• pp.145-150
• /
• 2016

Polyvinylidene fluoride (PVDF) as a representative polymer with the piezoelectric property has been studied since the 1960s. Crystalline structure of poly(vinylidene fluoride) polymer is composed of five different crystal structure of the polymer as a semi-crystalline. Among the various crystal structures, ${\beta}-type$ crystal exhibits a piezoelectricity because the permanent dipoles are aligned in one direction. Generally ${\beta}-form$ crystal structure can be obtained through the transformation of the ${\alpha}-form$ crystal structure by the stretching and it can increase the amount through the after treatment as poling process after stretching. ${\beta}-form$ crystal structure the PVDF fibers produced by wet spinning is formed through a diffusion mechanism of a polar solvent in the coagulation bath. However, it has a disadvantage that the diffusion path of the solvent remains as pores in the fiber because the fiber solidification occurs simultaneously with the diffusion of the polar solvent. These pores play a role in reducing effect of poling process owing to effect of disturbances acting on the polarization by the electric field. In this work, the drying method using the microwave was introduced to remove more effectively the residual solvent and the pore within PVDF fibers produced through wet-spinning process and piezoelectric PVDF fibers was produced by transformation of the remaining ${\alpha}$ form crystal structure into ${\beta}-crystal$ structure through the stretching process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1905-1911
• /
• 2015

Melanin is one of the most important factors affecting skin color. Melanogenesis is the bioprocess of melanin production by melanocytes in the skin and hair follicles and is mediated by several enzymes, such as tyrosinase, tyrosinase related protein (TRP)-1, and TRP-2. Convenient enzymatic transformation of the simple phenol pyrogallol with polyphenol oxidase originating from pear to an oxidative product, purpurogallin, was efficient. The structure of the pyrogallol oxidation product was identified on the basis of spectroscopic methods. The biotransformation product purpurogallin showed significant inhibitory effects against both melanin synthesis and tyrosinase activity in a dose-dependent manner in B16 melanoma cells. In addition, purpurogallin significantly attenuated melanin production by inhibiting TRP-1, and TRP-2 expression through modulation of their corresponding transcription factors, and microphthalamia- associated transcription factor in B16 cells. Consequently, purpurogallin derived from convenient enzymatic transformation of pyrogallol might be a beneficial material for reducing skin hyperpigmentation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.804-810
• /
• 2002

The code division multiple access(CDMA) system capacity is limited by the amount of interference of the system. To reduce the unnecessary interference, this paper proposes optimized cell identification codes for site selection diversity transmission(SSDT) power control in wideband code division multiple access system of third generation partnership project(3GPP). The main objective of SSDT power control is to transmit on the downlink from the primary cell, and thus reducing the interference caused by the multiple transmission. In order to select a primary cell, each cell is assigned a temporary identification(ID) and user equipment(UE) periodically informs a primary cell ID to the connecting cells during soft handover. The non-primary cells selected by UE do not transmit the dedicated physical data channel(DPDCH) to reduce the interference. A major issue with the SSDT technology is the impact of uplink symbol errors on its performance. These errors can corrupt the primary ID code and this may lead to wrong decoding in the base station receivers. The proposed SSDT cell ID codes are designed to minimize the problem and to be easily decoded using simple fast Hadamard transformation(FHT) decoder.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.801-824
• /
• 2022

Recently, United Nations found that 38% of global carbon emissions are generated in the building sector, surpassing other industries (32%) and transportation (23%), and ESG is actively used as a way to reduce carbon emissions in the building sector, led by overseas advanced countries. In Korea, as the National Pension Service announced "Consider ESG with more than 50% of investment assets" this year, the move to introduce ESG in the building sector is accelerating, centering on construction companies and asset management companies. However, as the domestic ESG evaluation system is still mainly focused on corporate governance and social responsibility, interest in the environmental sector is lagging behind that of advanced countries. As ESG in the building sector is expected to grow rapidly over the next 10 years, I would like to suggest the following development directions. The first is the expansion of the incentive system. In order for the government to successfully implement policies related to ESG in the building sector, incentive system such as tax reduction and building standards should be expanded further than now in addition to negative systems such as rent restrictions and punishment taxes due to regulatory violations. Second, standardized ESG standards are established. Rather than creating an independent Korean ESG standard that is far from global standards, it is necessary to organize the common parts of global standards and evaluation methods and create and provide guidelines in the form of standard textbooks that can be used equally by all stakeholders. Third, it is an effort to link ESG in the building sector with Digital Transformation(DX). This is because actual energy savings and carbon emission reduction can be realized only when the operation method of the building sector, which is operated mainly by manpower, is digitalized and converted to an intelligent way.

• Journal of KIISE
• /
• v.42 no.2
• /
• pp.242-254
• /
• 2015

In this paper, we address the problem of improving the performance of multi-step k-NN search using multi-dimensional indexes. Due to information loss by lower-dimensional transformations, existing multi-step k-NN search solutions produce a large tolerance (i.e., a large search range), and thus, incur a large number of candidates, which are retrieved by a range query. Those many candidates lead to overwhelming I/O and CPU overheads in the postprocessing step. To overcome this problem, we propose two efficient solutions that improve the search performance by reducing the tolerance of a range query, and accordingly, reducing the number of candidates. First, we propose a tolerance reduction-based (approximate) solution that forcibly decreases the tolerance, which is determined by a k-NN query on the index, by the average ratio of high- and low-dimensional distances. Second, we propose a coefficient control-based (exact) solution that uses c k instead of k in a k-NN query to obtain a tigher tolerance and performs a range query using this tigher tolerance. Experimental results show that the proposed solutions significantly reduce the number of candidates, and accordingly, improve the search performance in comparison with the existing multi-step k-NN solution.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.445-455
• /
• 2009

Microbiological sulfate reduction is the transformation of sulfate to sulfide catalyzed by the activity of sulfate-reducing bacteria using sulfate as an electron acceptor. Low solubility of metal sulfides leads to precipitation of the sulfides in solution. The effects of microbiological sulfate reduction on in-situ precipitation of arsenic and copper were investigated for the heavy metal-contaminated soil around the Songcheon Au-Ag mine site. Total concentrations of As, Cu, and Pb were 1,311 mg/kg, 146 mg/kg, and 294 mg/kg, respectively, after aqua regia digestion. In batch-type experiments, indigenous sulfate-reducing bacteria rapidly decreased sulfate concentration and redox potential and led to substantial removal of dissolved As and Cu from solution. Optimal concentrations of carbon source and sulfate for effective microbial sulfate reduction were 0.2~0.5% (w/v) and 100~200 mg/L, respectively. More than 98% of injected As and Cu were removed in the effluents from both microbial and chemical columns designed for metal sulfides to be precipitated. However, after the injection of oxygen-rich solution, the microbial column showed the enhanced long-term stability of in-situ precipitated metals when compared with the chemical column which showed immediate increase in dissolved As and Cu due to oxidative dissolution of the sulfides. Black precipitates formed in the microbial column during the experiments and were identified as iron sulfide and copper sulfide. Arsenic was observed to be adsorbed on surface of iron sulfide precipitate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.101-106
• /
• 2020

This paper relates with the VS-QE-MMA (Varying Stepsize-Quantized Error-MMA) based on the varying stepsize for improving the equalization performance in the QE-MMA adaptive equalization algorithm that is possible to reducing the intersymbol interference occurred at channel. The SE-MMA use the high-order statistics of transmitted signal and sign of error signal. The QE-MMA was appeared for the H/W implementation easiness substitutes the multiplication and substraction into the shift and substraction in the updating the tap coefficient based on the power-of-two operation of error signal magnitude. The QE-MMA gives degradation of equalization performance due to the such simplification of arithmetic operation. For improving this problem, the propose algorithm, namely VS-QE-MMA, applies the varying stepsize of the nonlinear transformation of error signal. It was confirmed by simulation that the VS-QE-MMA gives better performance than current QE-MMA in the same channel and signal to noise ratio. As a result of simulation, the VS-QE-MMA has more better performance in the every performance index, and it was also confirmed that the varying stepsize effect can be obtained in the greater than 10dB of signal to noise ratio.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.2
• /
• pp.59-63
• /
• 1998

Three different male-sterile cytoplasmic lines and their common maintainer 'Zhenshan 97B' and two elite restorer lines were used to study cytoplasmic effects on agronomic trait manifestation per se under different nitrogen supply levels. The result showed that cytoplasmic effects could be modified by nitrogen environments. The cytoplasmic effect on grain yield under 150 kg N/ha varied depending on crosses, while it was significantly negative in most crosses under both 60 and 330 kg N/ha. The correlation and path-coefficient analyses suggested that it was expected to improve cytoplasmic effects through reducing maximum tillers and increasing the percentage of productive tillers, leading to increased productive tillers and higher yield in hybrid rice by the aid of cultural practice and genetic transformation. This study also revealed that the same cytoplasm in different combinations had differential effect under the same nitrogen environment, indicating that cytoplasmic effect was produced by interaction of nuclear genes with cytoplasm rather than cytoplasm per se. These results indicated the usefulness of evaluating diverse cytoplasmic sources in various nuclear genotypes bred for hybrid rice breeding program. The finding also suggested that negative cytoplasmic effect could be effectively overcome by elite restorer lines through the interaction of nuclear genes with female cytoplasm.