• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1049-1052
• /
• 2002

The aligning between the punch and die governs no only the burr formation characteristics but also the life time of the punch and die in the sheet metal blanking process. There are many ways to adjust the two elements in the general punching systems but in the case of micro punch system, the punch size is reduced to a few tenth of micrometer range and the general aligning methods are almost impossible to apply. The image processing is the most widely used method in micro punch aligning, but in order to apply the method, it needs quite a large space for visionary system to approach the punch-die aligning zone. In this paper, the new punch-die aligning method with using the total capacitance between the punch and die hole is proposed. In this method, the tip surface of the punch tool locates at the same plane of the die surface and the capacitance variation between the two elements are measured. When the center of the two elements are coincided, the capacitance is minimized, but when the align Is changed to any direction, the capacitance between the two elements increase. In order to verify the feasibility of this method, the aligning and punching tests was performed.

• ETRI Journal
• /
• 제38권5호
• /
• pp.847-857
• /
• 2016

Broadcasting services such as multi/single channel HDTV and 3DTV/2DTV use a multi-channel encoder that changes the bitrate and composition of the video service depending on the time. However, this type of multi-channel encoder could cause a longer latency owing to the variable bitrate and relatively bigger size of the buffers, which results in the same delay as in 3DTV even for a conventional DTV service. On the other hand, systems built based on separate encoders, each of which is optimized for the target service, might not have such latency problems. Nevertheless, there might be a distortion problem in the image and sound at the time of a switchover between two encoders with different output bitrates and group of picture structures. This paper proposes a system that can realize a seamless video service conversion using two different video encoders optimized for each video service. An overall functional description of the video service change control server, which is a main control block for the proposed system, is also provided. The experiment results confirm the seamless switchover and reduced broadcasting latency of DTV services compared with a broadcasting system composed of a multi-channel encoder system.

• 대한기계학회논문집B
• /
• 제32권8호
• /
• pp.574-581
• /
• 2008

The characteristics of combustion and flow for a lean premixed flame in lab-scale gas turbine combustor was studied through experiment and numerical analysis. From the experiment, flame structure and heat release rate were obtained from OH emission spectroscopy. Qualitative comparisons were made line-integrated OH chemiluminescence image and abel-transformed one. NOx analyzer was implemented to get the characteristic of NOx exhaust from the combustor. From the numerical analysis, the thermal distribution and characteristic of recirculation zone with the change of fuel-air mixing degree, the characteristic of methane distribution with equivalence ratio in the combustor respectively. Total heat release rate is increased with increasing equivalence ratio. Thermal Nox is reduced with increasing fuel-air mixing degree. Increasing equivalence ratio results in the decrease of the size of reaction zone and alteration of the position of the reaction zone into the entrance of the combustor.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.382-388
• /
• 2012

본 논문에서는 ARM Cortex-A9 듀얼코어 플랫폼에서 지원하는 병렬처리 기법 중 하나인 Advanced SIMD기반의 NEON을 적용한 H.264/AVC 고속화 움직임추정 방법론을 연구하였다. 다양한 움직임추정 방법 중 하나인 전역탐색기법에 NEON을 적용하여 각 매크로블록의 SAD 연산횟수를 1/4 감소시켰다. 해당 매크로블록의 픽셀 값들을 8개의 16bit NEON 레지스터에 할당하였고, NEON에서 지원하는 Intrinsic 함수를 사용하여 동시에 128bit 연산을 수행하였다. 이러한 방법으로 계산된 SAD 값들 중 최소 SAD 값을 가지고 정확한 모션벡터를 선정했다. 그 결과 영상의 크기 및 매크로블록의 크기에 따라 성능이 평균 30% 이상 향상되는 효과를 검증하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권1호
• /
• pp.10-14
• /
• 2015

Video Content owners seek to squeeze the maximum amount of revenue from their assets via distribution into more territories. Digital Cinema Package(DCP), trusted solution to distribute protected content to theaters, caters to relatively small user base, which limits revenue. With the growth of the Internet & other digital media, the economics of media content has changed dramatically. Security remains main concern to deliver content to millions of consumers using intelligent digital display devices like Tablets, Smartphones, Smart TVs, Desktop & Laptop. By making the video content available to this segment securely, content owners will benefit from increased revenue. Through this paper we propose Open Source HomeDCP model to distribute the content to home users for offline viewing. We propose to include other open source CODEC than JPEG2000/MPEG2, which are specifically designed for theatrical performance. Final image size will be further reduced considering the display device resolution where video will be finally played. Key Delivery Message(KDM) system to be altered to suit new devices. This will be a big boost to Content Economy as content owners would be able to distribute the content securely to the wider audience & ensure more revenue.

• 대한금속재료학회지
• /
• 제49권8호
• /
• pp.619-627
• /
• 2011

The poisoning effect of Zr in aluminum alloys was investigated by analyzing the filtered cakes of aluminum alloy melt taken with the $Prefil^{(R)}$ footprinter through a variety of analytic instruments, SEM/EDX, Auger, and TEM. Experimental results indicated that the morphology and chemical composition of the aluminum alloys were not modified with the addition of Zr, which is to previous belief that Zr poisoning is caused by modification of $(Ti_{1-x}Zr_x)Al_3$. On the other hand, $TiAl_3$ surroundig $TiB_2$ particles was modified and its lattice parameter was more mismatched by increasing Zr content, leading to less nucleation rate. This is also supported by the observation that the poisoning effect is reduced when Ti is added, resulting in a lower content ratio of Zr to Ti. These results suggest that extra Ti should be added to eliminate the poisoning effect of Zr in aluminum alloys containing Zr.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1293-1308
• /
• 2020

In fine-tuning-based transfer learning, the size of the dataset may affect learning accuracy. When a dataset scale is small, fine-tuning-based transfer-learning methods use high computing costs, similar to a large-scale dataset. We propose a mid-level feature extractor that retrains only the mid-level convolutional layers, resulting in increased efficiency and reduced computing costs. This mid-level feature extractor is likely to provide an effective alternative in training a small-scale medical image dataset. The performance of the mid-level feature extractor is compared with the performance of low- and high-level feature extractors, as well as the fine-tuning method. First, the mid-level feature extractor takes a shorter time to converge than other methods do. Second, it shows good accuracy in validation loss evaluation. Third, it obtains an area under the ROC curve (AUC) of 0.87 in an untrained test dataset that is very different from the training dataset. Fourth, it extracts more clear feature maps about shape and part of the chest in the X-ray than fine-tuning method.

• 한국인터넷방송통신학회논문지
• /
• 제24권1호
• /
• pp.181-187
• /
• 2024

이미지 공간에서 무작위로 회전된 객체에 대한 분류 성능이 우수한 기법으로는 군 등변 CNN과 steerable 필터를 이용한 CNN 등이 있다. 본 논문에서는 이들의 수학적 구조를 설명하고 구현 방법을 소개한다. 기존의 CNN을 포함한 세 개의 모델에 대하여 동일한 필터 수를 갖도록 구현한 다음, 무작위로 회전된 MNIST를 이용하여 실험하고 이들의 성능을 비교분석한다. 실험 결과에 의하면 steerable CNN은 CNN보다 6.5% 이상의 인식률 향상을 보여준다. 특히, steerable CNN은 학습할 파라미터의 수가 상대적으로 적어서 훈련 데이터셋의 크기를 줄여도 성능 열화가 비교적 크지 않음을 실험 결과로 확인한다.

• 한국멀티미디어학회논문지
• /
• 제9권4호
• /
• pp.434-442
• /
• 2006

본 논문에서는 모니터와 모바일 디스플레이간의 복잡한 색 정합 과정을 단순화시키는 3차원의 색 정합 look-up table(LUT)을 설계하였다. 여기에서 영상의 색은 CIEXYZ 혹은 CIELAB 등의 장치 독립적인 색 공간에서 처리되며, 색역의 차이를 보상하기 위해 색역 사상이 수행된다. 장치 의존적인 RGB 색 공간에서 장치 독립적인 색 공간으로의 변환은 디스플레이 특성화 과정을 수행함으로써 이루어진다. 기존의 S-curve 모텔을 이용하여 모바일 LCD 를 특성화 하면 모바일 LCD의 채널 색도 변화와 채널 의존 특성으로 인해 특성화 오차가 허용 오차보다 커지게 된다. 본 논문에서는 R, G, B, C, M, Y, K 성분의 X, Y, Z의 전기-빛 입출력 곡선을 모두 이용하여 특성화 오차를 줄였다. 제안한 색 정합 LUT 와 복잡하고 단계적인 색 정합 절차 사이의 색 정합 결과 영상 비교 실험을 통해 허용오차 내의 영상을 재현할 수 있는 색 정합 LUT의 최소 크기가 64($4{\times}4{\times}4$)라는 것을 확인하였다.

• 인터넷정보학회논문지
• /
• 제18권1호
• /
• pp.21-26
• /
• 2017

본 논문에서는 홍채정보로 개인인증을 위한 USB-OTG(Uiversal Serial Bus On-the-go) 영상인식 모듈을 설계한다. 개인인증을 위해 사용자가 스마트 폰 버튼을 누를 필요가 없도록 스마트 기기를 안면주위의 여러 장의 안면영상을 획득 후, 눈 깜박임에 의한 화소 값 차로 안면과 홍채영역을 검색하는 영상인식 알고리듬을 제안한다. 본 연구에서는 인접한 눈을 뜬 영상과 눈을 감은 영상을 감지한 안면과 홍채 영상의 프레임 화소 값의 차이를 사용한다. 또한, 홍채 영역분할에 의한 동공과 홍채영역 위치를 빠르게 찾을 수 방법을 활용한다. 제안한 빠른 홍채영역의 위치탐색은 눈 영역의 적정한 그리드 크기에 의해 결정할 수 있다. 안면과 홍채영역의 제한된 영역을 탐색하는 홍채인식 카메라 모듈의 USB-OTG 인터페이스 통한 인접영상의 프레임 차이에 의해 검출할 수 있도록 설계하였다. 이로서 스마트 디바이스 사용자가 홍채 인식을 위해 눈을 깜빡이지 않고 대기해야 하는 불편함을 제거함으로써 사용자 편의성을 증대시킬 것으로 기대한다.