• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.42-50
• /
• 2001

In this paper, the effects of scale formation in engine water jacket upon the thermal durability of engine itself and its component parts were studied. To understand the effect of quality of water, a full load engine endurance test for 50 hours was carried out with not-treated underground water. The followings were found through the tested engine inspection after the endurance test; 1-2 mm thick scale formation in the engine water jacket, valve seat wear, piston top land scuffing, piston pin stick, and cylinder bore scuffing in siamese area. In order to understand the causes of above test results, the heat rejection rate to coolant, the metal surface temperature of combustion chamber, and the oil and exhaust gas temperatures were measured and analyzed. The scale formed in the engine water jacket played a role as thermal insulator. The scale formed in the engine reduced the heat rejection rate to coolant and it caused to increase the metal surface temperature. The reduced heat rejection rate to coolant increased the heat rejection rate to oil and exhaust gas and increased the oil and exhaust gas temperature. Also, the reasons of valve seat wear, piston top land scuffing and cylinder bore scuffing, and piston pin stick quantitatively analyzed in this paper.

• 한국지반공학회논문집
• /
• 제21권3호
• /
• pp.65-77
• /
• 2005

본 연구에서는 계단식 보강토 옹벽에 대한 측소 모형실험 수행하고 그 결과를 토대로 계단식 보강토 옹벽의 파괴 메카니즘을 분석하였다. 보강토 옹벽의 모형설험은 5m 높이의 현장옹벽에 대해 상사법칙을 적용하여 축소$\cdot$모사하였으며 상사법칙 적용 결과에 따라 보강재를 선택하여 실험을 실시하였다. 또한, 파괴 메카니즘 분석을 위해 자중에 의한 파괴를 성공적으로 유도하였다. 실험결과를 토대로 보강토 옹벽의 상$\cdot$하단 옹벽의 이격거리와 보강재 길이가 파괴 양상에 미치는 영향을 분석하였으며 아울러 현재 적용되고 있는 설계기준의 타당성 검토하였다.

• 한국터널지하공간학회 논문집
• /
• 제9권4호
• /
• pp.343-349
• /
• 2007

터널 화재와 관련된 축소모형실험연구는 기본적인 데이터는 제공할 수 있지만, 축소모형과 실물화재간의 정확한 이론적 상사관계가 정립되어 있지 않기 때문에 실물화재에 대한 직접적인 분석을 하기에는 어려움이 따른다. 이에 산소소모율법을 적용하여 열방출율과 같은 물리량의 측정이 가능한 실물화재실험장치인 대형칼로리미터를 개발하였다. 이를 이용하여 차량의 화재시 열방출율을 측정하기 위한 실물실험을 실시하였으며, 그 결과 차량의 열방출율은 $2.3{\sim}3.4\;MW$로 측정되었다. 이는 PIARC에서 권고하는 차량의 열방출율과 유사한 범위로서 개발된 실물화재평가장치의 신뢰성을 확인할 수 있음은 물론이고 향후 관련 연구에 매우 유용하게 이용될 수 있을 것이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.849-854
• /
• 2002

From the analysis results of some as-built drawings in national roadway bridges in Korea, many bridge piers are expected to show complex shear-flexural behaviour under earthquakes. But the previous research works about the seismic evaluation of bridges considered flexural behaviour RC piers only. In addition, the past bridge design specifications in Korea didn't include limitation on the amount of longitudinal lap splices in the plastic hinge zone of piers. Thus a large majority of non-seismically designed bridge piers in Korea may have lap splices in plastic hinge zone. In this study, prototype pier was selected among existent bridge piers whose failure mode is expected to be complex shear-flexural mode. And then, full scale and 1/2 reduced scale model RC piers with various longitudinal lap splice details were constructed. From the quasi static test results on these model RC piers, the effect of longitudinal lap splices on the seismic performance of bridges piers was analyzed. And the seismic capacity of the non-seismically designed shear-flexural RC piers was evaluated.

• 한국대기환경학회지
• /
• 제17권4호
• /
• pp.347-354
• /
• 2001

SCR (Selective Catalytic Reduction) process is presently considered as one of the most effective techniques for removing nitric oxides from exhaust gases. In this study, based on the conceptually designed SCR reactor of 500 MW coal fired power plant. a reduced scale (1/20) SCR reactor model was made to analyze the flow pattern in front of catalyst layer according to the guide vane's design factors such as the number, interval, and angle of vanes. The results of the test were compared to those numerical simulation in order to assure the reliability of two methods. On the basis of our study. the critical Reynolds number (2.0$\times$ 10$^{5}$ ) was proposed for ensuring the similarity between the reduced scale model and the prototype of SCR reactor. Optimum design parameters of guide vanes were determined as follows, 4 vanes, the first vane angle of 93$^{\circ}$, and the vane intervals of 0.85 S/n, 1.05 S/n, 1.1 S/n, 1.0S/n, 1.0S/n (S: the distance of duct, n: the number of guide vanes). The excellent agreement between the results of the numerical simulation and the reduced scale model provides the validation of two methods for prediction of flow through SCR reactor.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.194-205
• /
• 2009

In geotechnical engineering, the mechanical characteristics of soil, the main material of geotechnical engineering, is highly related to the confining stress. Reduced-scale physical modeling is often conducted to evaluate the performance or to verify the behavior of the geotechnical systems. However, reduced-scale physical modeling cannot replicate the behavior of the full-scale prototype because the reduced-scale causes difference of self weight stress level. Geotechnical centrifuges are commonly used for physical model tests to compensate the model for the stress level. Physical modeling techniques using centrifuge are widely adopted in most of geotechnical engineering fields these days due to its various advantages. In this paper, fundamentals of geotechnical centrifuge modeling and its application area are explained. State-of-the-art geotechnical centrifuge equipment is also described as an example of KOCED geotechnical centrifuge facility at KAIST.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.79-86
• /
• 2000

This paper presents the results of a parametric study on the behavior of tunnel face reinforced with horizontal pipes. A series of reduced-scale model tests was carried out to in an attempt to verify previously performed three-dimensional numerical modeling and to investigate effects of reinforcement layout on the tunnel face deformation behavior The results of model tests indicate that the tunnel face deformation can significantly reduced by pre-reinforcing the tunnel face with longitudinal members and thus enhancing the tunnel stability. In addition, the model tests results compare fairly well with those from the previously performed three-dimensional finite element analysis. Therefore, a properly calibrated three dimensional model may effectively be used in the study of tunnel face reinforcing technique.

• 척추신경추나의학회지
• /
• 제9권2호
• /
• pp.21-33
• /
• 2014

Objectives : This study was to report the improvement of the patient with multiple sclerosis treated by Korean Medical treatment. Methods : The patient diagnosed as multiple sclerosis treated by acupuncture, bee venom pharmacupuncture, chuna manual therapy, and herbal medicine. To evaluate the effects of korean medicine, we used manual muscle test(MMT), the standard for assessment of the effect of stroke treatment, functional system(FS), visual analog scale(VAS). Results : 1. The patient's pain and optic dysfunction were reduced by the above therapy. 2. There was no change in manual muscle test(MMT), but there was mild improvement in finger joints function in the standard for assessment of the effect of stroke treatment. 3. In functional system(FS) scale, there was enhancement in optic function within a range. And there was improvement in expanded disability statue scale(EDSS) from 4.0 to 3.0. 4. In visual analog scale(VAS), there was considerable improvement from 9 to 6. Conclusions : The korean medical treatment was reduced pain and optic dysfunction.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권8호
• /
• pp.371-377
• /
• 2005

This paper Presents the Potential gradient characteristics of structure grounding electrode when a test current flows through grounding electrode. In order to analyze the potential gradient of ground surface on structure grounding electrode, the reduced scale model has been used. The potential gradient has been measured and analyzed for types of structure using the hemispherical grounding simulation system in real time. The structures were designed through reducing real buildings and fabricated with four types on a scale of one-one hundred sixty. The supporter was made to put up with weight of structure and could move into vertical, horizontal, rotary direction. When a test current flowed through structure grounding electrodes, ground potential rise was the lowest value at electric cage type(type B). According to resistivity and absorption percentage In concrete attached to structure, the potential distribution of ground surface appeared differently.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.337-344
• /
• 2001

Some as-built drawings in national roadway bridges in Korea were examined. There are many bridge piers, whose aspect ratios are in the vicinity of 2.5. These columns are expected to do shear-flexure behaviour and have large scale effect between full and reduced scale model. In the study, full and 1/2 scale model tests on the shear-flexure behaviour columns were carried out. The seismic performance of existing bridge piers without seismic details were examined by Quasi Static Test