• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.633-640
• /
• 2014

In this research, the surface roughness affecting the pressure drop in a pipe used as the steam generator of a PWR was studied. Based on the CFD (Computational Fluid Dynamics) technique using a commercial code named ANSYS-FLUENT, a straight pipe was modeled to obtain the Darcy frictional coefficient, changed with a range of various surface roughness ratios as well as Reynolds numbers. The result is validated by the comparison with a Moody chart to set the appropriate size of grids at the wall for the correct consideration of surface roughness. The pressure drop in a full-scale U-shaped pipe is measured with the same code, correlated with the surface roughness ratio. In the next stage, we studied a reduced scale model of a U-shaped heat pipe with experiment and analysis of the investigation into fluid-structure interaction (FSI). The material of the pipe was cut from the real heat pipe of a material named Inconel 690 alloy, now used in steam generators. The accelerations at the fixed stations on the outer surface of the pipe model are measured in the series of time history, and Fourier transformed to the frequency domain. The natural frequency of three leading modes were traced from the FFT data, and compared with the result of a numerical analysis for unsteady, incompressible flow. The corresponding mode shapes and maximum displacement are obtained numerically from the FSI simulation with the coupling of the commercial codes, ANSYS-FLUENT and TRANSIENT_STRUCTURAL. The primary frequencies for the model system consist of three parts: structural vibration, BPF(blade pass frequency) of pump, and fluid-structure interaction.

• 한국항해항만학회지
• /
• 제34권5호
• /
• pp.383-388
• /
• 2010

본 연구는 크루즈선에 적합한 생물학적 오 폐수처리장치 개발을 위하여 SBR, MBR, MSBR 공정을 Lab scale 실험을 수행하여 오염물 처리 효율과 크루즈선이라는 특수 환경과의 접목성을 검토한 결과 MSBR공정이 처리효율과 장치 운영 면에서 가장 적합한 공정으로 평가되었다. MSBR 공정은 처리 대상 물질이 특정 성분에 국한 되지 않고 유기물, 영양염류, 병원성 미생물 처리에 있어 모두 안정적인 효율을 나타내었으며, 소요용적 및 장치의 운영 면에서도 우수한 결과를 나타내어 선박이라는 특수한 현장 적용에 매우 유리한 공정으로 확인되었다. MSBR 공정의 BOD, COD 및 SS 제거 효율은 99%, 98%, 99%로 나타나 IMO의 규제 기준을 모두 만족하였으며, 총질소와 인의 제거 효율도 76%, 59%로 강화되어 가는 해양오염기준을 충만족시킬 수 있는 공정으로 판단되었다.

• 자원리싸이클링
• /
• 제14권2호
• /
• pp.28-32
• /
• 2005

화합물반도체 제조 공정에서 발생하는 GaAs scrap으로부터 열분해법을 이용하여 갈륨을 회수하기 위한 기초 실험으로 200 g/batch 규모의 진공 열분해 실험을 수행하였고, 이 결과를 이용하여 30 kg/batch 용량의 Packed Tower가 부착된 열분해 장치를 제작하였다. 기초실험 결과 GaAs의 열분해속도는 온도가 높아짐에 따라 커지지만, 특히 1000$^{\circ}C 이상에서는 갈륨의 증기압 또는 증가하므로 갈륨의 회수율이 낮아지는 것을 알 수 있었다. 노 내 압력이 2~2.5${\times}10^{-2} mmHg일 때 1000~1050$^{\circ}C에서 가장 좋은 결과를 보였고, 이때 89% 정도의 갈륨 회수율을 나타내었다. GaAs의 열분해 시 비소의 분압은 온도가 높아짐에 따라 증가하고 융점인 1237$^{\circ}C를 전환점으로 온도는 낮아져도 증기압은 높은 이력현상(Hysteresis)을 보이는데, 이와 같은 특성을 이용하여 산업 생산에 적용한 열분해장치 제작에서는 반응기 위에 충진탑을 설치하였다. 그 결과, 열분해 반응기 내의 온도가 융점 이상의 고온에서도 99% 정도의 높은 회수율을 얻을 수 있었다.

• 대한금속재료학회지
• /
• 제49권4호
• /
• pp.281-290
• /
• 2011

In order to gain better understanding of the selective surface oxidation and its influence on the galvanizability of a transformation-induced plasticity (TRIP) assisted steel containing 1.5 wt.% Si and 1.6 wt.% Mn, a model experiment has been carried out by depositing Si and Mn (each with a nominal thickness of 10 nm) in either monolayers or bilayers on a low-alloy interstitial-free (IF) steel sheet. After intercritical annealing at $800^{\circ}C$ in a $N_2$ ambient with a dew point of $-40^{\circ}C$, the surface scale formed on 590 MPa TRIP steel exhibited a microstructure similar to that of the scale formed on the Mn/Si bilayer-coated IF steel, consisting of $Mn_{2}SiO_{4}$ particles embedded in an amorphous $SiO_{2}$ film. The present study results indicated that, during the intercritical annealing process of 590 MPa TRIP steel, surface segregation of Si occurs first to form an amorphous $SiO_{2}$ film, which in turn accelerates the out-diffusion of Mn to form more stable Mn-Si oxide particles on the steel surface. During hot-dip galvanizing, particulate $Fe_{3}O_{4}$, MnO, and Si-Mn oxides were reduced more readily by Al in a Zn bath than the amorphous $SiO_{2}$ film. Therefore, in order to improve the galvanizability of 590 TRIP steel, it is most desirable to minimize the surface segregation of Si during the intercritical annealing process.

• Structural Engineering and Mechanics
• /
• 제86권3호
• /
• pp.385-397
• /
• 2023

This study presents an experiment and analysis to compare the seismic behavior of full-scale reinforced concrete beam-column joint strengthened by prestressed steel strips, externally bonded steel plate, and CFRP sheets. For experimental investigation, five specimens, including one joint without any retrofitting, one joint retrofitted by externally bonded steel plate, one joint retrofitted by CFRP sheets, and two joints retrofitted by prestressed steel strips, were tested under cyclic-reserve loading. The failure mode, strain response, shear deformation, hysteresis behavior, energy dissipation capacity, stiffness degradation and damage indexes of all specimens were analyzed according to experimental study. It was found that prestressed steel strips, steel plate and CFRP sheets improved shear resistance, energy dissipation capacity, stiffness degradation behavior and reduced the shear deformation of the joint core area, as well as changed the failure pattern of the specimen, which led to the failure mode changed from the combination of flexural failure of beams and shear failure of joints core to the flexural failure of beams. In addition, the beam-column joint retrofitted by steel plate exhibited a high bearing capacity, energy consumption capacity and low damage index compared with the joint strengthened by prestressed steel strip, and the prestressed steel strips reinforced joint showed a high strength, energy dissipation capacity and low shear deformation, stirrups strains and damage index compared to the CFRP reinforced joint, which indicated that the frame joints strengthened with steel plate exhibited the most excellent seismic behavior, followed by the prestressed steel strips.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.236-239
• /
• 2021

AI 기술의 성장과 함께 지식 그래프의 크기는 지속적으로 확장되고 있다. 지식 그래프는 주로 트리플이 연결된 RDF로 표현되며, 많은 RDF 저장소들이 RDF 데이터를 압축된 형태의 ID로 변환한다. 그러나 RDF 데이터의 크기가 특정 기준 이상으로 클 경우, 테이블 탐색으로 인한 높은 처리 시간과 메모리 오버헤드가 발생한다. 본 논문에서는 해시 ID 매핑 테이블 기반 RDF 변환을 분산 병렬 프레임워크인 맵리듀스에서 처리하는 방법을 제안한다. 제안한 방법은 RDF 데이터를 정수 기반 ID로 압축 변환하면서, 처리 시간을 단축하고 메모리 오버헤드를 개선한다. 본 논문의 실험 결과, 약 23GB의 LUBM 데이터에 제시한 방법을 적용했을 때, 크기는 약 3.8배 가량 줄어들었으며 약 106초의 변환 시간이 소모되었다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.260-266
• /
• 2013

This study for establishing specific standards of atrium design aims to discuss design of atrium to consider energy performance according to the types of atrium of office building. In order to evaluate a type and a scale of atrium at the early design stage, modeling details of mass design were set as standards of conceptual design. In the experiment, Project Vasari was used to analyze modeling and energy consumption, based on the LOD 100-step suggested by AIA, because there is no guideline to specify a level of modeling details at each design process. From this analysis, the correlation among a simple-typed atrium and scale and energy load was understood, and the followings are the considerations for designing an atrium. First, the single-sided atrium reduced energy the most, and it was followed by three-sided, two-sided, four-sided and continuous-typed ones. On the whole, they could decrease energy by up to about 15%. Also, the atrium with a wide facade facing in the south was more favorable to reduce energy. Second, planning an atria within 10~30% of the whole building area was more energy efficient. Third, rather than the depth, adjusting the length in designing an atrium could reduce cooling and heating loads by 1.5% per 1m. As explained above, energy performance evaluation considering types and planning elements of atrium helps to assess alternatives in a reasonable way. In particular, considering the use of building needs to be preceded to select a type of atrium, although it is also important to consider its planning elements.

• 인지과학
• /
• 제10권3호
• /
• pp.17-28
• /
• 1999

양안 부등 정보에 근거하여 모사 된 타원형 및 포물선형 반원주체가 관찰거리가 변화함에 딸 체계적으로 왜곡되어 지각되었다. 실험1과 실험3의 두 가지 관찰조건 모두에서, 타원형 반원주체는 45 cm의 관찰거리에서는 실제 모양과 근사하게 지각되었으나 135 cm의 관찰거리에서는 실제 곡면성의 75%로 과소 평가되어 지각되었다. 실험2에서는, 관찰거리에 대한 정보가 풍부할 때, 포물선형 반원주체가 45 cm의 관찰거리에서 실제 곡면성에 비해 118%의 곡면 성을 갖는 것으로 과장되어 지각되었으며, 90 cm의 관찰거리에서는 실제에 근접하여 지각되었고, 135 cm의 관찰거리에서는 실제 곡면성에 비해 85%로 과소 평가되어 지각되었다. 관찰거리에 대한 정보가 감소된 관찰조건에서는 모든 관찰거리에서 실제의 곡면 성 보다 다소 과소 평가되어 지각되었다. 예를 들어, 45 cm의 관찰거리에서는 실제 곡면성에 근접하여 지각되었고, 135 cm의 관찰거리에서는 실제 곡면성에 비해 68%로 과소 평가되어 지각되었다. 이러한 실험 결과들은 시각기제가 양안 부등을 추정한 관찰거리로 척도와(scale) 하여 3차원 모양을 표상 하게 된다는 설명을 지지하고, 이에 대립되는 가정, 즉 거리에 따라 변하지 않는 부등 곡률(disparity curvature)을 탐지해 냄으로써 3차원 모양을 직접 지각할 수 있다는 가정이 타당하지 않음을 시사한다.

• 상하수도학회지
• /
• 제11권1호
• /
• pp.33-41
• /
• 1997

An attempt was made to enhance anaerobic treatment efficiency by adopting the anaerobic sequencing batch reactor(ASBR) process at a thermophilic temperature. Operational characteristics of the ASBR process were studied using laboratory scale reactors and concentrated organic wastewater composed of soluble starch and essential nutrients. Effects of fill to react ratio (F/R) were examined in the Phase I experiment, where the equivalent hydraulic retention time(HRT) was maintained at 5 days with the influent COD of 10g/L. A continuous stirred tank reactor(CSTR) was operated in parallel as a reference. Treatment efficiency was higher for the ASBRs because of continuous accumulation of volatile suspended solids(VSS) compared to the CSTR. However, the rate of gas production and organic removal per unit VSS in the ASBRs was much lower than the CSTR. This was caused by reduced methane fermentation due to accumulation of volatile acids(VA), especially for the case of low F/R, during the fill period. When the F/R was high, maximum VA was low and the VA decreased in short period. Consequently, more stable operation was possible with higher F/R. Effects of hydraulic loading rate on the efficiency was studied in the Phase II experiment, where the organic loading rate was elevated to 3333mg/L-d with the F/R of 0.12. Reduction of organic removal along with rapid increase of VA was observed and the stability of reaction was seriously impaired, when the influent COD was doubled. However, operation of the ASBR was quite stable, when the hydraulic loading rate was doubled and a cycle time was adjusted to 12 hour. It is essential to avoid rapid accumulation of VA during the fill period in order to maintain operational stability of the ASBR.

• 한국전문물리치료학회지
• /
• 제27권4호
• /
• pp.264-271
• /
• 2020

Background: Because a forward-leaning posture can cause increased back muscle activity and pain. Therefore, an innovative method to reduce back muscle activity and pain is required. Objects: This study aimed to investigate the effects of a head support on muscle activity and pain in a forward-leaning posture. Methods: A total of 14 male and 16 female students (average age, 21.65 ± 2.37 years; height, 166.15 ± 7.90 cm; and weight, 60.65 ± 9.00 kg) were recruited for the experiment. Two of them were excluded due to musculoskeletal disorders. The muscle activity and pain in the forward-leaning posture were assessed while participants washed dishes for 7 minutes with and without a head support. The condition of using a head support was randomly performed with a 5-minutes break. To confirm a lumbar flexion angle of 30° during the experiment, myoVIDEO was used, and surface electromyography was used to measure muscle activity. Pain was assessed using a 10-point visual analog scale (VAS). The Wilcoxon signed-rank test was used to analyze the data, with p < 0.05 indicating statistical significance. Results: The cervical, thoracic, and lumbar erector spinae muscle activities significantly decreased with the use of the head support, but there was no significant change in the gluteus maximus. There was a significant decrease in the VAS score for the lumbar erector spinae (p < 0.05), but there was no significant change in the VAS score for the cervical region. Conclusion: The use of a head support in a forward-leaning posture reduced cervical, thoracic, and lumbar erector muscle activity and pain. Therefore, it could be recommended during working in a forward-leaning posture, such as during dishwashing, cooking, and working as a factory employee.