• Transactions of Materials Processing
• /
• v.27 no.1
• /
• pp.28-36
• /
• 2018

Electromagnetic forming is a type of high-speed forming process to deform a workpiece through a Lorentz force. As the high strain rate in an electromagnetic-forming simulation causes infeasibility in determining constitutive parameters, we employed inverse parameter estimation in the previous study. However, the inverse parameter estimation process required us to spend considerable time, which leads to an increase in computational cost. To overcome the computational obstacle, in this research, we applied two types of surrogate modeling methods and compared them to each other to evaluate which model is best for the electromagnetic-forming simulation. We exploited an artificial neural network and we reduced-order modeling methods. During the construction of a reduced-order model, we extracted orthogonal bases with proper orthogonal decomposition and predicted basis coefficients by utilizing an artificial neural network. After the construction of the surrogate models, we verified the artificial neural network and reduced-order models through training and testing samples. As a result, we determined the artificial neural network model is slightly more accurate than the reduced-order model. However, the construction of the artificial neural network model requires a considerably larger amount of time than that of the reduced-order model. Thus, a reduced order modeling method is more efficient than an artificial neural network for estimating the electromagnetic forming and for the rapid approximation of structural simulations which needs repetitive runs.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.4
• /
• pp.361-367
• /
• 1995

This study has been carried out to investigate the filteration performance of Electrostatically Stimulated Fabric Filter(ESFF) at high temperature condition. The electric field was maintained parallel to the fabric surface. The benefits of ESFF are lower residual pressure drop, improvement of fine particle removal efficiency and increasing reduced rate of pressure drop during a filteration cycle, stable operation at higher filtering velocities. According to the variance of filtering velocities and dust loadings, the results are summarized as follows; By imposing an electric field on the filter, the reduced rate of pressure drop was 7.sim.18% at room temperature, and when filtering velocity was 1.8m/min and dust loading was 1g/m$^{3}$, the value of reduced rate of pressure drop was shown the highest. Under the electric field around the filter, the reduced rate of pressure drop was 10.sim.35% at high temperature, and when filtering velocity was 1.8m/min and dust loading was 1g/m$^{3}$, the value of reduced rate of pressure drop was shown the highest. Most of all, at high temperature, the value of reduced rate of pressure drop was resulted to 25%. Also the collecting efficiency was shown clearly improved. By the SEM photo analysis, the number of penetrated particles at the Conventional Fabric Filter was approximately two times that of Electrostatically Stimulated Fabric Filter.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.5
• /
• pp.439-450
• /
• 2008

In this study, the reduced system for the dynamic analysis is proposed and the selection criterion of the primary degrees of freedom is presented considering the relation between natural frequency and external loading frequency. A well-constructed reduced system can assure the accurate representation of the dynamic behavior under arbitrary dynamic loads. For selecting the primary degrees of freedom of the reduced system, we employ the robust two-level condensation scheme of which the reliability has been proven through previous study. In the numerical examples, the reliability of the dynamic analysis based on the reduced system is demonstrated through comparing with those of global system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1070-1077
• /
• 2006

In the present study, sizing and shape optimizations are performed based on the reduced system of large-scaled problem. In the analysis part to achieve efficiency and reliability of computation, two-level condensation scheme is applied. In the construction of reduced system of large scaled problems, it is much more efficient to use sub-domain method. Thus, in the present paper, two-level reduction method combined with sub-domain method is employed. Once the reduced system is constructed, it is straightforward to obtain design sensitivities from the analysis results of the reduced system We use semi-analytic method to obtain design sensitivities. Performance of the efficiency and reliability of the present reduction method in the structural optimization problem is demonstrated through the numerical examples. The present framework of reduction method should serve as a fast and reliable design tool in analysis and design of large-scaled dynamic problems.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.1
• /
• pp.87-91
• /
• 2016

The development of high performance transparent electrode with flexibility have been required for flexible electronics. Here, we demonstrate the silver nanowire and reduced graphene oxide hybrid transparent electrode for replacing brittle indium-tin-oxide electrode by spray coating technique and plasma reduction. The spray coating system is applied to deposit silver nanowire and over coated graphene oxide films and it has a great potential to scale-up. The resistance of silver nanowire transparent electrode is reduced by 10% and the surface roughness is decreased after graphene oxide coating. The over-coated graphene oxide is successfully reduced by $H_2$ plasma treatment and it is effective in increasing the environmental stability of electrode. The lifetime of silver nanowire and reduced graphene oxide hybrid electrode at $85^{\circ}C$ of Celsius degree of temperature and 85% of relative humidity has much increased.

• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.23-27
• /
• 2010

The objective of this study was to map the gene for reduced embryo size in rice using DNA markers. The reduced embryo size mutant was induced from N-methyl-N-nitrosourea (MNU) treated Taichung 65. Genetic analysis revealed that the phenotype of the reduced embryo was controlled by a single recessive gene, designated as re-1. For mapping the gene controlling embryo size, an $F_2$ population was developed from a cross between the Korean Tongil-type, Milyang 23 (Oryza sativa ssp. indica) and the mutant. The ratio of $F_2$ seeds nearly fitted to 3:1 ratio, indicating that this phenotype was controlled by a single recessive gene. Bulked sergeant analysis was performed with SSR markers. The gene for the reduced embryo size was detected on chromosome 1. The gene was further mapped between two SSR markers, RM315 and RM265 on chromosome 1 (approximately 1.5 Mb interval). The linked markers will facilitate selection of this grain character in a breeding program and provide the foundation for positional cloning of this gene.

• Food Science and Industry
• /
• v.49 no.2
• /
• pp.34-44
• /
• 2016

Given that fermented foods, such as kimchi and doenjang, are main food sources for high sodium intake in Korea, there have been needs to develop sodium-reduced kimchi and doenjang with the proper quality. However, small and medium sized business could not actively develop the sodium-reduced products due to lack of techniques and information as well as economical reasons. The most important aspects is to address food safety issues including microbial contaminations in sodium-reduced foods. Hurdle Technology, physical, biological, chemical control technique, would have to be preferentially considered to increase the hygiene safety standards in entire processing steps including raw materials, process water, manufacturing environments, and so on. Once the food hygiene level is stable, the next challenges are to improve the taste of the sodium reduced-products as well as to packaging and storage technologies. The development of a variety of sodium-reduced fermented foods would result in significant mitigation of sodium intake by Korean. This report provides the directions to develop sodium-reduced kimchi, doenjang or pickled food products for small and medium sized business, based on the technical consulting results of sodium reduction project supported by Ministry of Food and Drug Safety in 2015.

• Journal of the FoodService Safety
• /
• v.1 no.1
• /
• pp.19-25
• /
• 2020

A reduced salt, dry-type bulgogi bibimbap with AF-343 was prepared, and the acceptance, antioxidant antimicrobiological safety were investigated. The acceptance of the reduced salt and the AF-343 added sample, RW, showed the highest value of 5.37 among the samples, but it did not differ significantly from the other samples of the standard sample group. The acceptances of the appearance, aroma, texture, and overall acceptance were not significantly different in all samples (p>0.05). In the DPPH radical scavenging activity, the values of SW and RW with the AF-343 were 15.05 and 14.77, respectively, which were significantly higher than the 9.57 and 10.42 obtained for SWO and RWO without AF-343, respectively (p<0.05). Pathogenic microorganisms tests that were either negative or not detected in any of the samples representing hygiene safety were met in the dried bibimbap against Escherichia coli, pathogenic microorganisms, and general bacteriological tests. The aerobic plate counts were 30.0 CFU/g, indicating that the dry type salt-reduced bibimbap containing AF-343 was within the safety range that meets the safety standards of microorganisms in the food code for commercialization. Therefore, high-quality dry-type reduced salt bibimbap with AF-343 is helpful for antioxidant action and effective for skin moisturizing and can be produced without affecting the taste and palatability.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.5-8
• /
• 2006

The effect of annealing time in Metal Organic Deposition(MOD) method was investigated at reduced total pressure. As the total annealing pressure was reduced, the growth rate of YBCO films increased from 0.14nm/sec at atmospheric pressure to 4.2nm/sec at 1 Torr. For the total pres sure of 700, 500, 300, 100, and 1 Torr, the optimal annealing times of 60, 40, 20, 10, 2minutes were found in our experimental conditions. When the an nealing time was short, poor crystallinity or un-reacted phase was obtained. Also, the degradation of YBCO films occurred when exposed longer to the humid ambient at the high annealing temperature. The reduced pressure was found effective to in crease the growth rate and to control the pore size of the YBCO films in MOD method. A fast growth of MOD-YBCO films was realized with high critical current density over $1MA/cm^2$ using reduced pressure annealing. Large pores, usually observed at atmospheric pressure in MOD method, disappeared and also, the number of pores was reduced.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.129-135
• /
• 2016

This study is about ionic water generator filter Recently, a lot of people feel deep interest in health and drinking water. Evaluation of the stability of oxidation-reduced potential (ORP) using the filter of the alkaline water. This study utilizes the three filter of activated carbon, UF, carbon block in alkaline reduced water equipment. Passing the water to the filter is evaluated that the OPR values are stability in accordance with the change of the volume in the bucket. Alkaline reduced water equipment is a system that has the function of making the water reduction. This system is the values of the human body beneficial minerals and ORP are made in the functional water has a very low value than general water. Which has passed through the filter the water in the water negative ions and positive ions through the electrolytic. After electrolysis, the cathode side by water, including $Ca^+$, $K^+$, $Mg^+$, $Na^+$ water gets Alkaline Reduced Water containing the minerals beneficial to the human body. A positive electrode side is made of the organic materials that have an anion such as chlorine (Cl), phosphorus (P), sulfur(S). This experiment uses the Alkaline Reduced Water to adjust the magnitude of the voltage of the electrolysis in the Alkaline Reduced Water. That is 1st step(pH8) 2nd step (pH8.5) 3th step (pH9), 4th step (pH9.5) in the Alkaline Reduced Water and -1st step (pH6.0), -2nd step (pH5.0) used as the acidic oxidation water. When the water passes through the three filter in this system was evaluated whether the ORP values are changed and stabilized. When about 100 liters of water passing through the filter was confirmed that the ORP values are stability and evaluation.