• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2266-2270
• /
• 2007

Electron transfer of a redox protein at a bare gold electrode is too slow to observe the redox peaks. A novel Nafion-riboflavin functional membrane was constructed during this study and electron transfer of cytochrome c, superoxide dismutase, and hemoglobin were carried out on the functional membrane-modified gold electrode with good stability and repeatability. The immobilized protein-modified electrodes showed quasireversible electrochemical redox behaviors with formal potentials of 0.150, 0.175, and 0.202 V versus Ag/AgCl for the cytochrome c, superoxide dismutase and hemoglobin, respectively. Whole experiment was carried out in the 50 mM MOPS buffer solution with pH 6.0 at 25 oC. For the immobilized protein, the cathodic transfer coefficients were 0.67, 0.68 and 0.67 and electron transfer-rate constants were evaluated to be 2.25, 2.23 and 2.5 s?1, respectively. Hydrogen peroxide concentration was measured by the peroxidase activity of hemoglobin and our experiment revealed that the enzyme was fully functional while immobilized on the Nafion-riboflavin membrane.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.286-287
• /
• 2012

Reset-first resistive switching mechanism based on reduction reaction in HfO2-x with oxygen drift-diffusion was studied. we first report that the indirect evidence of local filamentary conductive path formation in bulk HfO2 film with local TiOx region at Ti top electrode formed during forming process and presence of anion-migration at interface between electrode and HfO2 during resistive switching through high resolution transmission electron microscopy (HRTEM), electron disperse x-ray (EDX), and electron energy loss spectroscopy (EELS) mapping. Based on forming process mechanism, we expected that redox reaction from Ti/HfO2 to TiOx/HfO2-x was responsible for an increase of initial current with increasing the post-annealing process. First-reset resistive switching in above $350^{\circ}C$ annealed Ti/HfO2 film was exhibited and the redox phenomenon from Ti/HfO2 to TiOx/HfO2-x was observed with high angle annular dark field (HAADF) - scanning transmission electron microscopy (STEM), EDX and x-ray photoelectron spectroscopy. Therefore, we demonstrated that the migration of oxygen ions at interface region under external electrical bias contributed to bipolar resistive switching behavior.

• 환경위생공학
• /
• 제16권1호
• /
• pp.66-71
• /
• 2001

The objective of this study was to depict the kinetic behavior of the platinum catalyst for the deep oxidation of aromatic solvents and their binary mixtures. The oxidation kinetics of aromatic solvents, which were benzene, toluene and m-xylene, was studied on a 0.5% $Pt/{\gamma}-Al_2O_3$ catalyst. Deep oxidation of binary mixtures, which were 1:1 in volume, was carried out and the inlet concentration was controlled in the range of 133 and 333ppmv. An approach based on the two-stage redox model was used to analysis the results. The deep oxidation conversion of aromatic solvents was inversely proportional to inlet concentration in plug flow reactor. This trend is due to the zeroth-order kinetics with respect to inlet concentration. The kinetic parameters of multicomponent model were independently evaluated from the single compound oxidation experiments. A simple multicomponent model based on two-stage redox rate model made reasonably good predictions of conversion over the range of parameters studied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.395-396
• /
• 2005

We fabricated self-assembled monolayers(SAMs) onto quartz crystal microbalance(QCM) using viologen, which has been widely used as electron acceptor and electron transfer mediator. We determined the time dependence to resonant frequency shift during self-assembly process and observed the morphology of self-assembled mono layers by STM and investigated the electrochemical behavior of SAMs by cyclic voltammetry. Electrochemical deposition of viologen was investigated using electrochemical quartz crystal microbalance(EQCM). The redox reactions of viologen were highly reversible and the EQCM has been employed to monitor the electrochemically induced adsorption of SAMs during the redox reactions.

• 자원환경지질
• /
• 제40권1호
• /
• pp.29-45
• /
• 2007

전라북도 전주시 지역의 만경강 하천변 충적 대수층에 심도 30m까지 설치된 다중 심도 관정을 이용하여 산화-환원 환경과 관련된 지하수의 생물지구화학적 특성을 조사하였다. 대체로 용존 산소(DO)가 1 mg/L이하의 혐기성 환경이 지배적이었으며, 10-20m 구간에서는 높은 농도의 Fe($14{\sim}37mg/L$)와 Mn($1{\sim}4mg/L$)이 나타나고 그 하부에서는 S(-II) 이온이 검출되었다. 용존 Fe와 Mn이 높은 구간에서는 $O_2,\;NO_3$가 거의 없고, 퇴적물내의 Fe와 Mn의 함량은 심도에 따라 큰 차이 없이 분포하고 있어 전자수용체로서 이용된 Fe(III), Mn(IV)의 환원에 의해 지하수내의 용존 Fe와 Mn의 농도가 높아진 것으로 볼 수 있다. 용존 농도에서 Mn이 Fe에 비해 상대적으로 농도가 높게 나타나는 구간이 더 넓다. 환원 과정에서 전자공여체(electron donor)로 이용될 수 있는 유기 탄소(DOC) 농도가 지하수면 부근에서 급격히 감소하는 것으로 보아 지하수내 유기물은 상부에서 유입되는 것으로 보인다. 20m 하부에서는 $SO_4$가 감소하고 S(-II) 이온이 검출되는 것으로 보아 상부 구간보다는 하부구간에서 $SO_4$ 환원작용이 활발함을 지시한다. 여러 산화-환원쌍으로부터 계산된 산화-환원 전위는 Fe를 포함하는 쌍들간을 제외하고는 모두 일치하지 않아 전체적으로 산화-환원적으로 비평형 상태에 있다고 볼 수 있다. 지하수면 부근을 제외하고는 siderite, rhodochrosite 등의 탄산염 광물의 포화지수가 -2에서 +1의 범위를 보여 이들 광물에 의해 각각 Fe(II), Mn(II) 이온의 농도가 지하수내에서 조절될 수 있음을 보여주며, 20m 하부 심도 구간에서 S(-II) 이온이 검출되는 지점에서는 Fe(II)의 경우 FeS 광물에 의해서도 농도가 조절될 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.132-135
• /
• 1995

This paper describes the electrochemical and photochemical behavior of amphiphilic Os bipyridine compelx adsorbed on SnO$_2$electrodes by the Langmuir-Blodgett(LB) film as monolayer state. Theoretical equation of cyclicvoltammetry for redox species were discussed. And the cyclic voltammogram were simulated taking account theinteraction parameters. From these obtained values, we could fit almost all measured voltammograms with these parameters.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.345-350
• /
• 2018

Nanomaterials have considerable potential to solve several key challenges in various electrochemical devices, such as fuel cells. However, the use of nanoparticles in high-temperature devices like solid-oxide fuel cells (SOFCs) is considered problematic because the nanostructured surface typically prepared by deposition techniques may easily coarsen and thus deactivate, especially when used in high-temperature redox conditions. Herein we report the synthesis of a self-regenerated Pd metal nanoparticle on the perovskite oxide anode surface for SOFCs that exhibit self-recovery from their degradation in redox cycle and $CH_4$ fuel running. Using Pd-doped perovskite, $La(Sr)Fe(Mn,Pd)O_3$, as an anode, fairly high maximum power densities of 0.5 and $0.2cm^{-2}$ were achieved at 1,073 K in $H_2$ and $CH_4$ respectively, despite using thick electrolyte support-type cell. Long-term stability was also examined in $CH_4$ and the redox cycle, when the anode is exposed to air. The cell with Pd-doped perovskite anode had high tolerance against re-oxidation and recovered the behavior of anodic performance from catalytic degradation. This recovery of power density can be explained by the surface segregation of Pd nanoparticles, which are self-recovered via re-oxidation and reduction. In addition, self-recovery of the anode by oxidation treatment was confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM).

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.443-450
• /
• 2011

The three-reactor chemical-looping process (TRCL) for the production of hydrogen from natural gas is attractive for both $CO_2$ capture and hydrogen production. In this study, redox property of $Fe_2O_3$ and $WO_3$ supported with $ZrO_2$ and $MgAl_2O_4$ were studied with temperature programmed oxidation/reduction (TPO/R) experiment. All metal oxides were prepared by ball mill method. Metal oxides supported with $ZrO_2$ showed the good redox property in TPO and TPR tests. Reduction behavior was matched well the theoretical reduction mechanism. Metal oxides supported with $MgAl_2O_4$ formed a solid solution ($MgFe_{0.6}Al_{1.4}O_4$, $MgWO_4$). $Fe_2O_3$ showed more narrow reaction range and lower reaction temperature than $WO_3$.

• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.297-302
• /
• 2007

With aids of square wave voltammetry (SWV) the redox behavior for various combination of polyvalent ions (Sb+Fe, Sb+Zn, Sb+Ce+Ti+Zn) was investigated in alkali-alkaline earth-silica CRT (Cathode Ray Tube) glass melts. The current-potential curve so called voltammogram was produced at temperature range of 1400 to $1000^{\circ}C$ under the scanned potential between 0 and -800 mV at 100 Hz. In the case of the Sb+Fe and Sb+Zn doped melts, peak for $Sb^{3+}/Sb^0$ shown voltammogram was shifted to negative direction comparing to the only Sb doped melts. However, according to voltammogram of Sb+Ce+Ti+Zn doped melt, Ti and Ce except Zn had hardly any influence on the redox reaction of Sb. Based on the temperature dependence of the peak potential, standard enthalpy (${\Delta}H^0$) and standard entropy (${\Delta}S^0$) for the reduction of $Fe^{3+}$ to $Fe^{2+}$, $Sb^{3+}$ to $Sb^0$, $Zn^{2+}$ to $Zn^0$ and $Ti^{2+}$ to $Ti^0$ in each polyvalent ion combination of CRT glass melts were calculated.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.322-324
• /
• 2004

Poly(1-dodecyl-2,5-pyrrylene vinylene) (PDPV) has an extended 1t-conjugated structure and exhibits characteristic spectroscopic features. The PDPV we prepared has an absorption maximum at 510nm and its long absorption tail at ca. 750nm in methylene chloride is due to the long 1t-conjugated system connected to vinyl group. The large red-shift of emission was 625nm upon excitation at 480nm, which suggests the existence of a low emissive state. The emission of PDPV in less-polar solvents decreased markedly relative to that in the more-polar solvents; this observation was ascribed possibly to quenching by a strong vibrational mode of the dodecyl groups of PDPV in less-polar solvents. Furthermore, the emission from the high-energy side had a single decay component (0.1㎱, 49.96%), while that from the low-energy side had two components (0.6㎱, 27.1 %; 2.7㎱, 22.87%). We characterized the redox properties of PDPV by cyclic voltammetry. Every redox peak showed irreversible behavior; the oxidation peaks appeared at 1.7,0.8, and 0.6V and the reduction peak at -0.5V.