• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.289-296
• /
• 2020

BACKGROUND: There is a need for a revolutionary method to overcome the problem of biochar, which has relatively low adsorption capacity for existing anion pollutants, along with collectively recycling fallen leaves, a kind of forest by-product. Therefore, the objective of this study was to prepare iron-decorated biochar derived from fallen leaves (Fe-FLB), and to evaluate their adsorption properties to Congo red (CR) as anionic dye. METHODS AND RESULTS: The adsorption properties of CR by fallen leaves biochar (FLB) and Fe-FLB were performed under various conditions such as initial CR concentration, reaction time, pH and dosage with isotherm and kinetic models. In this study, Fe-FLB prepared through iron impregnation and pyrolysis of fallen leaves contained 56.9% carbon and 6.3% iron. Congo red adsorption by FLB and Fe-FLB was well described by Langmuir model and pseudo second order model and the maximum adsorption capacities of FLB and Fe-FLB were 1.1 mg/g and 25.6 mg/g, respectively. In particular, it was found that the adsorption of CR was occurred by chemical adsorption process by the outer boundary layer of Fe-FLB. CONCLUSION: Overall, the production of Fe-FLB using fallen leaves and using it as an anion adsorbent is considered to be a way to overcome the problem of biochar with relatively low anion adsorption in addition to the reduction effect of waste.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.46-57
• /
• 2006

This study was carried out for the purpose of recovering the refined gypsum from waste phosphogypsum. The refined gypsum was recovered as a under product of 325 mesh wet screening followed by dehydration and hydration stage. The influence of dehydration temperature and time, dehydration rate, aging time, slurry density of hydration and sonication time on the yield and grade of gypsum were investigated. The refined gypsum of $94{\sim}96%$ grade is recovered in 95% yield by wet screening after selective dehydration and hydration process, from the phosphogypsum. For the better separation efficiency of gypsum, it is recommended to treat the phosphogypsum at the conditions of as follows; 6hr's dehydration at $140^{\circ}C$, hydration slury density of $3{\sim}10%$, hydration temperature of $20{\sim}30^{\circ}C$, hydration time of 2hr. In additions, addition of sodium citrate 0.005M and sonication of $5{\sim}10min.$ are effective for increase the recovery of gypsum. On the other hand, aging the dehydrated gypsum 16 hours or longer make decrease the recovery of gypsum remarkably.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.36-43
• /
• 2024

Fishing net waste (FNW) constitutes over half of all marine plastic waste and is a major contributor to the degradation of marine ecosystems. While current treatment options for FNW include incineration, landfilling, and mechanical recycling, these methods often result in low-value products and pollutant emissions. Importantly, FNWs, comprised of plastic polymers, can be converted into valuable resources like syngas and pyrolysis oil through pyrolysis. Thus, this study presents a process for generating high-purity hydrogen (H₂) by catalytically pyrolyzing FNW in a CO₂ environment. The proposed process comprises of three stages: First, the pretreated FNW undergoes Ni/SiO₂ catalytic pyrolysis under CO₂ conditions to produce syngas and pyrolysis oil. Second, the produced pyrolysis oil is incinerated and repurposed as an energy source for the pyrolysis reaction. Lastly, the syngas is transformed into high-purity H₂ via the Water-Gas-Shift (WGS) reaction and Pressure Swing Adsorption (PSA). This study compares the results of the proposed process with those of traditional pyrolysis conducted under N₂ conditions. Simulation results show that pyrolyzing 500 kg/h of FNW produced 2.933 kmol/h of high-purity H₂ under N₂ conditions and 3.605 kmol/h of high-purity H₂ under CO₂ conditions. Furthermore, pyrolysis under CO₂ conditions improved CO production, increasing H₂ output. Additionally, the CO₂ emissions were reduced by 89.8% compared to N₂ conditions due to the capture and utilization of CO₂ released during the process. Therefore, the proposed process under CO₂ conditions can efficiently recycle FNW and generate eco-friendly hydrogen product.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.3
• /
• pp.27-39
• /
• 2009

The main objective of this study is to investigate the characteristics of combustion by analyzing fuel gases from a combustion equipment with various combustion conditions for refuse-derived fuels (RDFs). CO gas is a parameter for indicating of incomplete combustion during a combustion process. The lowest CO gas was produced when the experiment conditions were m=2 under air-fuel condition and $800^{\circ}C$. $CO_2$ gas is a final product after complete combustions. The highest amount of $CO_2$ gas was produced when the experiment conditions were m=2 under air-fuel condition and $800^{\circ}C$. The highest level of $SO_2$ gas was produced in S.1 sample containing the highest sulfur. The highest level of NOx gas was produced in S.1 sample with the highest nitrogen content and air-fuel condition of m=2 under temperature of $800^{\circ}C$. HCl gas that is generated by reacting with metals catalyst through oxygen catalyst reaction during combustion process is a precursor of dioxin formation. The higher level of HCl gas was produced in the sample with higher chlorine content. The lowest level of HCl gas was produced when the experiment conditions were air-fuel condition of m=2 and $800^{\circ}C$. The lowest level of $NH_3$ gas was generated when the experiment condition was m=2 under air-fuel condition and after 3 minutes. Air-fuel condition is more important to create $NH_3$ gas than operating temperatures. Higher level of $H_2S$ gas was generated in S.1 sample with the higher sulfur content and was created in RDFs that contain higher mixture ratios of sewage sludge and food wastes. A result of combustion, gases and gases levels from the combustion of S.1 and S.2 were very similar to the combustion of a stone coal. As results of this research, when evaluating the feasibility of the RDFs, the RDFs could be used as auxiliary and main fuels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.981-986
• /
• 2000

In the process of tuna for food, the unprocessed parts of the whole fish range from 30 to 35%, which are mostly used as animal feed stuff, and wasted. Thus, preliminary study on the recycling of the by-product was done to ultimately produce highly valuable products. The study was peformed on skin, skin flesh, tail flesh, dark flesh and abdominal flesh of the tuna. First, crude protein was the most abundant in the skin at 26.31%. About 21% of the crude protein were found in the other samples. Second, crude fat was greatly obtained in the skin at 15.58%. Interestingly, only 0.75% of crude fat was found in the dark flesh. Third, vitamin C and vitamin B group were highly measured in the abdominal flesh and the dark flesh, respectively. Importantly, docosahexaenoic acid (DHA, C22 : 6 $\omega$ -3) and eicosapentaenoic acid (EPA, C22 : 6 $\omega$ -3) which are highly unsaturated fatty acids, were abundant in the skin and skin flesh. To determine the effect of high temperature to the unprocessed parts, the samples were exposed to steam for 30 min. After this processing, 15-methylhexadecanoic acid (i-17 : 0) were in- creased in the skin flesh and the dark flesh. Furthermore, 3-hydroxytetradecanoic acid (3-OH 14 : 0), heptadecanoic acid (17 : 0), 2-hydroxyhexadecanoic acid (2-OH 16 : 0) and nonadecanoic acid (19 : 0) hat were not found before with steam were detected. The DHA and EPA in the dark flesh and the DHA in the skin were stable, respectively, even after the treatment.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.67-73
• /
• 2018

In this paper, risk assessment was conducted to verify self - disposal requirements by landfill for exempted incineration ash by using Resrad Ver.6.5 computer code. The result of risk assessment by landfill for the incineration by-product is that individual dose is $6.91{\times}10^{-2}{\mu}Sv\;y-1$ and collective dose is $3.475{\times}10^{-7}man-Sv\;y-1$. It proved that the result meets reference dose of individual dose $10{\mu}Sv\;y-1$ and collective dose 1 man-Sv y-1 for general public. According to the current 'Nuclear Safety Commission Notice [No. 2014-3]', it states that the exempted wastes can be disposed of by incineration, landfill and recycling. However, most of recently documents and papers related to exempted wastes are disposed of by landfill and recyling and it could not confirm the case of exempt by incineration. If the national consensus is derived and treating the waste by using process of incineration is activated, it could be considered to treat low level of radiation wastewater and activated carbon excluded from exempted waste because of nuclide $^3H$ and $^{14}C$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.4
• /
• pp.296-306
• /
• 2014

This study was conducted to survey and analyze the quantity of various organic wastes and to vitalize the utilization of agri-food by-products as raw materials for Total mixed ration (TMR), to improve feed cost savings and the quality of animal products. On-the-spot obstacles for animal farmers, along with legal and institutional alternatives are presented. The results are as follows. First, organic wastes in Korea are managed by the Allbaro system created in the Wastes Control Act, which processes 10,488 tons of cooking oil waste, 832,493 tons of animal and plant residues, 5,740 tons of animal carcasses, 1,171,892 tons of animal residues, and 2,172,415 tons of plant residues including 12,905 tons of rice hull and bran, for a total of 4,205,931 tons. Raw materials for TMR, namely rice hulls and bran as well as plant residues, accounted for 51.7% of the total national organic waste. The top 10 municipalities process 76~100% of all organic wastes and a supply management system is needed for the waste. Second, the 10 major agri-food by-products used as raw materials for TMR are bean curd by-product, rice bran, oil-cake, brewers dried grain, Distiller's Dried Grains with Solubles (DDGS), barley bran, soy sauce by-product, citrus fruit by-product, mushroom by-product and other food by-product (bread, noodles, snacks, etc.). Third, the biggest difficulties in using agri-food by-products are legal obstacles. Because agri-food by-products are regulated as industrial wastes by the Waste Control Act, animal farmers that wish to use them have legal reporting obligations including the installation of recycling facilities. To enable the use of agri-food by-products as raw materials for TMR, waste management system improvements such as 'the end of waste status' and the establishment of more than 10 public distribution centers nationwide are deemed essential.

• Journal of the Korean Society of Earth Science Education
• /
• v.12 no.2
• /
• pp.141-150
• /
• 2019

The purpose of this study is to investigate the effect of the pre-service teacher's maker project learning on self -directed learning ability and creative personality. This study established an eight-week period of experimental treatment from March to April 2019, and the students who participated in the study formed a research group of 75 students in three of their advanced classes who are attending the second semester of B University of Education and taking courses in 'Teaching Research 1'. The experimental treatment of research groups was conducted by the process of producing creative outputs through training of manufacturers. The experimental group of the study group was a process of producing creative output through maker education. The theme was set up to create creative output by group, worked with the main tool, 3D pen, and utilized the recycling material. When the creative output is completed, it is announced by presenting the actual product in each group. The results of the study are as follows. First, project learning by pre-service teachers had an effect on self-directed learning ability. Second, project learning by pre-service teachers had an effect on creative personality. Third, pre-service teachers was interested in learning about the project and responded positively to the students' perception.

• Clean Technology
• /
• v.30 no.2
• /
• pp.113-122
• /
• 2024

In order to better understand carbon dioxide recycling, the carbon dioxide capture characteristics of six different alkaline industrial by-products, including incineration ash, desulfurized gypsum, low-grade quicklime, and steelmaking slag were investigated using a laboratory-scale direct aqueous carbonation reactor. In addition to the dissolution characteristics of each sample, the main reaction structure was confirmed through thermogravimetric analysis before and after the reaction, and the reactive CaO content was also defined through thermogravimetric analysis. The carbon dioxide capture capacity and efficiency of quicklime were determined to be 473 g/kg and 86.9%, respectively, and desulfurized gypsum and incineration ash were also evaluated to be relatively high at 51.1 to 131.7 g/kg and 51.2 to 87.7%, respectively. On the other hand, the capture efficiency of steelmaking slag was found to be less than 10% due to the influence of the production and post-cooling conditions. Therefore, in order to apply the carbonation process to steelmaking slag, it is necessary to optimize the slag production conditions. Through this study, it was confirmed that the carbon dioxide capture characteristics of incineration ash, quicklime, and desulfurized gypsum are at levels suitable for carbonation processes. Furthermore, this study was able to secure basic data for resource development technology that utilize carbon dioxide conversion to produce calcium carbonate for construction materials.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.70-77
• /
• 2012

The Ladle Furnace Slag, about 20% of the electric arc furnace slag, has high content of free CaO and free MgO, which generates the expansion collapse by hydration reaction. Although many researchers have been endeavoring to recycle the EAF reducing slag in construction fields, there is not found the effective recycling method up to now. However, the LFS(Ladle Furnace Slag) contains mineral composition of the system of calcium aluminate with high-reactivity. Therefore, it is possible to developed the quick setting property and the high strength at the early age by the rapid cooling. This study aimed to check the reactive minerals and predict the reactivity with water on the LFS discharged from different steel product plants. The test results show that many types of LFS has hydration reactivity and can use in construction field as a inorganic binder with the rapid setting property.