• Advances in concrete construction
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2019

The possibility of using recycled coarse glass aggregates as a substitute for natural crushed stone are relatively limited. In order to promote it for engineering application, this paper reports the effect of coarse glass aggregate on mechanical behavior of concrete. The coarse aggregates are substituted for coarse glass aggregate (CGA) as 0%,20%,40%,60%,80% and 100%.The results show that increasing the coarse glass aggregate content cause decrease in compressive strength, the elastic modulus, the splitting tensile strength, the flexural strength. An equation is presented to generate the relationship between cube compressive strength and prism compressive strength, the relationship between cube compressive strength and elastic modulus, the relationship between cube compressive strength and splitting tensile strength, the relationship between cube compressive strength and flexural strength of coarse glass concrete.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.81-90
• /
• 2022

There are several ways to improve software performance by using existing software. So, the developments of some programs are the most promising ways. However, traditional part programming studies usually assume that the components are recycled "as is". Existing models of component objects only provide limited support for partial adjustments, namely white box technologies ( copy-paste & inheritance) and the black-box methods (such as mixing and encapsulation). These technologies have problems related to recovery, efficiency, implementation of indirect costs, or their own problems. This paper suggests as JALTREE, The Black Box adaptation technology, which allows us for the implementation of previous components, but we need configurable the interface types, for measuring the adaptability. In this article we discussed the types of adjustments including component interfaces and component composition. An example of customizing JALTREE and component can be illustrated in several examples

• Advances in concrete construction
• /
• v.12 no.6
• /
• pp.461-467
• /
• 2021

Polyethylene-terephthalate (PET) from bottle waste and linear low-density polyethylene (LLDPE) from barrels and tanks waste are widely available and need to be recycled. Recycling them in concrete and mortar is an alternative solution for their disposal. In this study various quantities of sand (5%, 10%, 15% and 20%) were substituted by powder from LLDPE waste. In addition, PET waste fibers (corrugated, straight) were added to the mortar with different percentages (0.5%, 1%, 1.5% and 2%) of cement mass. This paper evaluate the mechanical and physical properties of the composites in fresh (workability, air content and density) and hardened state (compressive and flexural strength, water absorption and total shrinkage). From the experimental results, it can be concluded that the strengthening in tensile of the mortar with plastic waste corrugated fibers is improved. Other important results are that the water absorption and the density rate are less than that of the ordinary mortar.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.31-32
• /
• 2023

In this paper, in order to utilize recycled aggregate as an alternative to natural resources in the construction industry, the physical properties of red mud-added soil concrete according to the type of aggregate and amount of binder were reviewed. The results of using waste asphalt concrete as a natural aggregate substitute were SPS-KSCICO- It was found to satisfy the compressive strength standards for parking lots of 001-2006, and its applicability in the construction industry was judged.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.67-73
• /
• 2010

Paper packaging materials are essential in protection and transportation of commercial or industrial products. Raw materials for packaging paper production are mainly obtained from various grades of waste paper. For this reason, the recycled fibers from waste paper would probably have possibility of containing heavy metals. This study was focused on the development of optimum pre-treatment method for the quantitative analysis of mercury. The optimum pre-treatment for open digestion system were obtained at the treatment conditions of acid combination with $HNO_3/HCl/H_2O_2$ or $HNO_3/H_2SO_4$ at $80^{\circ}C$. The optimum pre-treatment conditions in closed digestion system were determinated by the acid combination with $HNO_3/HCl/H_2O_2/HF$ in microwave at 320 W for 20 min. The recovery rate in open digestion system was 85~94% and in closed digestion system was indicated as about 100%. Therefore, the closed system is superior than the open system in pre-treatment method for the quantitative analysis of mercury, and the detected mercury contents in the sample of KOCC, AOCC and kraft sack paper were measured below 1 ppm.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.123-129
• /
• 2015

There are two kinds of cartons for beverage packaging, one is aseptic brick (AB) type and the other is gable top (GT). In this study, AB and GT were used as a raw material of recycled paper to investigate the recyclability at their varied blending ratios. Fiber consistency at pulping decreased as the blending ratio of AB increased. As a result, a lot of fines were generated from AB and flakes from GT increased because shear force in pulper decreased. Bulk of handsheets was more than $2.0cm^3/g$, and ISO brightness decreased as the blending ratio of AB increased. The best condition to recycle beverage cartons is to discriminate each cartons separately because of differences in the composition. However, there are problems such as the limit of the collection system and social costs. Therefore, it is assumed that the blending ratios of AB should be adjusted at less than 20% for effective recycling of beverage cartons.

• Journal of Apiculture
• /
• v.34 no.4
• /
• pp.315-323
• /
• 2019

Large amounts of sludge produced by paper mill industries represent one of the most serious environmental problems in the world. Recently, beekeepers living in the neighborhood of the paper mill in Hwasan County, Youngcheon city, GB, Korea, became alarmed that honey bee colonies were dying off suddenly across the neighborhood. A preliminary study was conducted to evaluate the toxicity (oral, fumigation, repellent) of recycled solid paper mill sludge (SPMS) and leachate paper mill sludge (LPMS) to honey bee workers under laboratory conditions, and to analyze the volatile organic compounds(VOC). The SPMS and LPMS were separately subjected to a liquid-liquid extraction (LLE) at three temperatures to extract VOC(highest VOC yields: 1.52% SPMS and 0.34% LPMS). A total of 70 chemicals were detected in the VOC of paper mill sludges, of which 49 and 21 volatile organic compounds from SPMS and LPMS, respectively. The SPMS was dominated by high degree presence of stanols (saturated sterols), such as cholestanol, cholestan-3-ol and also saturated hydrocarbons. However, LPMS was characterized by the absence of sterols. Both SPMS and LPMS showed an influence on the olfactory behavior of honey bee on Y-tube assay, with repulsion rates of 72 and 68%, respectively. Both SPMS and LPMS at concentration of 100mg/mL caused higher honey bee oral mortality than the untreated controls at 48, 72, 96 and 120 hours after treatment(highest oral mortality at 120 hr: 85.74%(SPMS); 93.51 % (LPMS)). A similar pattern was observed when honey bees were tested to fumigant toxicity. Both SPMS and LPMS caused significant higher mortality than the untreated control 24 hour after the exposure (highest fumigation mortality at 120 hr: 69.4% (SPMS); 56.8% (LPMS)). These preliminary results indicated that paper mill sludge could be partly responsible for sudden death and disappearance of honey bees, especially in hot humid summer days. With climate change, the risk of environmental chemical exposure to honey bee would pose greater attention.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.78-86
• /
• 2005

Hwaseonji(Korean traditional paper) used for writing and painting has been made from the mulberry bast-fiber and the short-length fiber pulps, wood pulps. However, besides wood pulps, other short-length fiber pulps also can be used instead of wood pulps. Hence, this research was carried out to make the various Hwaseonjis with the different properties, using the five kinds of short-length fiber pulps respectively. The short-length fiber pulps used in this research were softwood bleached kraft pulp(SwBKP) hardwood bleached kraft pulp(HwBKP), rice-straw bleached sulfite pulp(RsBSP), bamboo bleached kraft pulp(BbBKP) and recycled pulp from vellem paper(RP). And, the mixture ratios of the mulberry bast-fiber pulp and short-length fiber pulps were 100:0, 80:20, 60:40, 40:60 and 20:80. After various Hwaseonjis were made from different mixtures mentioned above with hand-made method, physical properties and chinese ink blot property of each paper were measured. The strengthes were the highest in the Hwaseonji made from the mixture of the mulberry bast-fiber pulp and SwBKP. However, chinese ink blot property and smoothness were better when RsBSP, BbBKP or RP were mixed into the mulberry bast-fiber pulp. As a result, the various kinds of Hwaseonjis which the users can choose based on their needs were made.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.22-40
• /
• 2015

Cellulose fibers is one of the most abundant in nature. It has many distinctive features: abundant in nature, biodegradable, non-toxic, eco-friendly, sustainable, easy to fabricate, hydrophilic, and cost-effective. Cellulose fibers, known as pulp, is produced from cellulose-containing materials by the pulping process. As the raw material, wood has been most commonly used while recycled pulp has been also used to some degree. Thus, pulp usually refers to wood pulp. Generally, the pulp and paper industry is regarded as the commodity market where the cost should be much more important than the quality. It also belongs to a mature market where the growth is slow, or even in decline. Accordingly, technological development has been rather stagnant for the industry. Recently, however, the pulp and paper industry has faced very serious challenges. First, due to digital technology, there has been a steady decline in the need for pulp and paper products. The digital industry has continuously replaced printed products such as books, newspapers, and magazines. Second, there has been a trend initiated by developed countries to limit the use of wood as the raw material for the sake of environmental protection. This forces the industry to find a more efficient use of wood pulp as well as finding alternative, non-wood sources. Third, as an individual becomes wealthier and more conscious of health-care, the quality of a product becomes more important than the cost. Thus, a paradigm shift is needed from the cost-conscientious to the quality conscientious. The objective of this article is to review the technologies aimed at engineering cellulose fibers for producing high-value added paper products.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.35-45
• /
• 2014

Confocal Reflection Microscopy (CRM) was applied to investigate external fibrillation of different types of fibers such as Kajaani reference fiber, Whatman filter fiber, thermomechanical pulp (TMP), and recycled TMP fiber. It was confirmed that the CRM images are created from surface structures of the fiber cell wall. Confocal Laser Scanning Microscopy (CLSM) captured overall shape of the fiber, but minute details of the surface of the fiber were missed. CRM captured the minute details of the fiber surface. From the CRM and CLSM images, it was observed that the CRM images mainly appeared on the fiber surfaces. External fibrillation of the fiber occurs at the fiber surface, not inside the cell wall. Thus, it was concluded that investigation on the external fibrillation of the fiber was possible by utilizing CRM images. A direct qualtitative and quantitative method for analysis of external fibrillation of fiber was demonstrated by utilizing surface area to volume ratio, volume fraction, and roughness calculated from 3-dimensional images reconstructed from stacks of CRM images from the different fibers.