• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.21-38
• /
• 1993

In order to investigate the influence of recycling, a laboratory method simulating the papermaking process was used for assessing the effects of recycling on fiber properties. Sw-BKP, Hw-BKP and BGP were disintegrated and beaten to about 42$^{\circ}$SR-44$^{\circ}$SR by a valley beater. After beating, these pulps were dewatered by centrifuge and dried at 90$^{\circ}C$ for 72hrs. This recycling process(sequence of wetting, defiberating, dewatering and drying) was repeated seven times. Physical, mechanical and optical properties of recycled pulps were evaluated by TAPPI Standards. Morphological changes occurred through recycling process was observed by SEM. Sheet density decreased with recycling. The largest drop in density occurred during the first recycling. The porosity values decreased with recycling. Mechanical properties such as tensile, burst strength and folding endurance, decreased with recycling. However tear strength of Sw-BKP and mixtured pulp increased at the first recycling. Optical properties such as brightness, opacity and light scattering coefficient, increased with recycling. However, brightness of mixtured pulp gradually decreased with recycling. Fibrillated outer layer of the fiber was gradually removed from the surface with recycling. As a result of recycling, crinkles on the fiber surface were found to be more folded.

• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.259-266
• /
• 2017

In a contemporary fashion along with the advance of high technology, development of a new material is being increasingly emphasized and the need of creative convergence using a computer is being expanded. As a global designer who appeared through association between Japan and the West, Issey Miyake has been continually pursuing a new challenge and a solution using high technology, leading the globalization of Japanese fashion. This research aims at examining design characteristics of Issey Miyake collection's A-POC showing a new paradigm, that is, an innovative clothing manufacture system to input information on materials, colors and shapes into a textile machine based on the computer program and manufacture a cylindrical fabric for completion of seamless clothing without sewing or cutting. A-POC is evolving continually through the development of new materials including recycled fibers and organics together with diversification of processing technology. Besides, it shows design characteristics including an integrated manufacturing method, autonomy for customers' selection, practicality for comfortable wearing by the majority, environment friendly idea to reduce waste of fabrics and materials and a new presentation through convergence of exhibition concepts of modern art. This research on Issey Miyake's A-POC characteristics is expected to present a role of fashion designers in a new design idea and paradigm of contemporary clothing using high technology.

• Journal of the Korea Concrete Institute
• /
• v.14 no.2
• /
• pp.148-155
• /
• 2002

This research investigates the moisture and aging effects of wastepaper fiber-cement composites. Wastepaper fibers is obtained by a dry process. Wastepaper fiber-cement composites was manufactured by the hatscheck process. The effects of moisture and aging on the performance of wastepaper fiber-cement composites were investigated through accelerated laboratory tests simulating the effects of moisture sensitivity and wet-dry cycles as well as freeze-thaw cycles and long-term drying. They were shown to possess acceptable moisture and aging performance compared with virgin fiber cement composites.

• Advanced Composite Materials
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2007

Composite materials consisting of crushed carbon fiber reinforced plastics (CFRP) pieces and acrylonitrile-butadiene-styrene (ABS) resin were prepared by an injection mold method to solve the problem of recycling of CFRP. The electrical properties, such as electrical resistivity, alternating current impedance and electromagnetic interference (EMI) shielding effect, were measured for the composites. The electrical resistivity of the composites showed a percolation type of conduction behavior and no difference between parallel and perpendicular to the injection direction was observed for CFRP content higher than the critical value. Measurement of alternating current impedance revealed that the conduction mechanism is attributed to the direct conductive paths generated by distributed carbon fibers; however, strong frequency dependence of the impedance was observed for the CFRP content near the critical one. The frequency dependence of the impedance is caused by the inter-fiber connection and can be expressed as a simple equivalent circuit. The absorption component of shielding effect (SE) was smaller than the expected value estimated from its resistivity. The decline of SE is thought to be caused by the decrease in effective thickness due to fiber orientation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.72-78
• /
• 2006

The extraction properties of the biological waste originated from the Tobacco industry were evaluated. The biological waste have been recycled and transformed into a valuable material, so called a reconstituted tobacco sheet(Recon) by the papermaking process. In this process, The mechanical extraction process, which divides the mixed raw material slurry into the soluble stock and the insoluble stock, could affect not only the quality of final Recon product but also the productivity of whole Recon making process. This study investigated the effects of the extraction process on the slurry properties in detail. In order to quantify the amounts of the solubles which resided in the insoluble fibers, the washing treatment of the stock before and after squeezing process was applied. The amounts of the residual solubles showed little changes according to each stage of the extraction process. The fractionation of the slurry showed the difference in the amount of soluble in the stock depending on the size of the biological waste. After the extraction process, the bigger size fiber portion contained about 19%(by weight) in soluble after pressing but the smaller size fiber portion 9% in soluble. The fractionation ratio of the stocks also was changed by the screw press process, which could demonstrate the physical effects of the mechanical extraction.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.14-20
• /
• 2007

The effects of blending starches with different gelatinization temperatures on the development of ply-bond strength were systematically investigated using a three component mixture design technique. Oxidized corn starches with different gelatinization temperatures were blended with natural corn starch and sprayed for plybonding. Optimum blend ratio for maximizing plybond strength improvement for the starch blends was 40% of natural starch, 27% of oxidized starch with low gelatinization temperature and 33% of oxidized starch with high gelatinization temperature. Starch granules with the lowest gelatinization temperature gelatinizes at the lowest temperature, while the natural corn starch gelatinizes at later stage of drying. The improvement of plybond strength with starch blends were verified on machine trial as well. Plybond strength improvement obtained from the machine trial was lower than that achievable with handsheets, which was attributed to the lower internal bond strength of the linerboards made from recycled fibers.

• Advanced Composite Materials
• /
• v.16 no.2
• /
• pp.181-194
• /
• 2007

This paper presents the mechanical properties of a composite consisting of acrylonitrile-butadiene-styrene (ABS) resin mixed with carbon fiber reinforced plastics (CFRP) pieces (CFRP/ABS). CFRP pieces made by crushing CFRP wastes were utilized in this material. Nine kinds of CFRP/ABS compounds with different weight fraction and size of CFRP pieces were prepared. Firstly, tensile and flexural tests were performed for the specimens with various CFRP content. Next, fracture surfaces of the specimens were microscopically observed to investigate fracture behavior and fiber/resin interface. Finally, the tensile modulus and strength were discussed based on the macromechanical model. It is found that the elastic modulus increases linearly with increasing CFRP content while the strength changes nonlinearly. Microscopic observation revealed that most carbon fibers are separated individually and dispersed homogeneously in ABS resin. Epoxy resin particles originally from CFRP are dispersed in ABS resin and seem to be in good contact with surrounding resin. The modulus and strength can be expressed using a macromechanical model taking account of fiber orientation, length and interfacial bonding in short fiber composites.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.5 s.118
• /
• pp.9-15
• /
• 2006

Wet compaction test (WCT) is a fiber evaluation method where wet fibers are compressed at one side of a cylinder and water drains out from the other side. The consistency of the fiber furnishes and their pressures are recorded during the test. In the previous study we found that WCT results always gave better coefficients of determination in fiber furnish drainage, and paper properties (density, tensile, tear, and burst strength) than those of WRV (water retention value). Fiber freeness and fiber length correlated well with drainage and tear strength of the furnishes, respectively; however, their correlations were very much improved by combining the WCT results. In this study, we used the WCT test for fractionated fiber furnishes to see whether improvement of the WCT is possible. We found that strength properties such as breaking length and burst index were correlated better with the fractionated long fiber furnishes. Drainage was greatly affected by the presence of short fiber furnishes. We used bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) as fiber furnishes in this study. Fiber fractionation can be performed on-line in these days by using multifractor and WCT can be used as an on-line test in papermachine in the future.

• Advances in concrete construction
• /
• v.11 no.3
• /
• pp.239-253
• /
• 2021

The behavior of concrete containing waste glass as a replacement of cement or aggregate was studied previously in the most of researches, but the present investigation focuses on the recycling of waste glass powder as a substitute for silica fume in high strength concrete (HSC). This endeavor deals with the efficiency of using waste glass powder, as an alternative for silica fume, in the flexural capacity of HSC beam. Thirteen members with dimensions of 0.3 m width, 0.15 m depth and 0.9 m span length were utilized in this work. A comparison study was performed considering HSC members and hybrid beams fabricated by HSC and conventional normal concrete (CC). In addition to the experiments on the influence of glass powder on flexural behavior, numerical analysis was implemented using nonlinear finite element approach to simulate the structural performance of the beams. Same constitutive relationships were selected to model the behavior of HSC with waste glass powder or silica fume to show the matching between the modeling outputs for beams made with these powders. The results showed that the loading capacity and ductility index of the HSC beams with waste glass powder demonstrated enhancing ultimate load and ductility compared with those of HSC specimens with silica fume. The study deduced that the recycled waste glass powder is a good alternative to the pozzolanic powder of silica fume.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.297-307
• /
• 2017

This research was performed to use recycling wood fiber from waste MDF as raw materials for manufacturing of interior decorative accessories. Virgin fiber of Pinus rigida for manufacturing MDF and recycling fiber from manufactured MDF with virgin fiber were dyed by using reactive dyes (Bis-monochlorotriazine and Vinyl sulfone type), vat dyes (Anthraquinone type), direct dyes (Diazo type) such as red, yellow and blue, and natural dyes using gardenia or sappan wood, and they were examined to evaluate their dyeing properties and sunlight fastness. The hue of virgin fiber and recycling fiber were 4.2YR, and 4.4YR, respectively, which showed red-yellowish color. The recycling fiber looked a little darker than the virgin fiber, where $L^*$ values of the recycling fiber showed a little lower. Reactive, vat and direct dyes dyed well both the virgin and recycling fibers. The recycling fiber showed a little higher values of colour yield and a little lower in $L^*$, but it seemed that there was no significant difference. The Hue values of the recycling fiber and the virgin fiber dyed with sappan wood were 4.4YR and 4.0YR, showing no difference between/after dyeing. However the Hue values of the recycling fiber and the virgin fiber dyed with gardenia were 7.4YR and 6.9YR, respectively. Those values were much higher than the values of the fibers dyed with other chemical dyes. But the fibers dyed with gardenia showed poor sunlight fastness.