• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.542-551
• /
• 2023

본 논문에서는 바텀애시 골재에 천연 잔골재를 혼입한 다공성 콘크리트의 열적 특성을 분석하였다. 본 연구에서는 바텀애시 골재에 천연 잔골재를 사용하여 각 골재의 재료 특성을 파악 한 후, 다공성 콘크리트의 골재로 사용하였다. 물-바인더 비는 0.25으로 고정하여, 가압다짐을 0.5, 1.5 및 2.5 MPa 수준으로 지정하여 다공성 콘크리트 시편을 제작하였다. 단위질량, 총 공극률 및 열전도도 실험을 진행하고 분석을 수행하였다. 가압다짐 수준이 증가하고, 천연잔골재 혼입률이 증가하면 단위질량과 열전도도 값은 증가하였으며, 총 공극률 값은 감소하였다. 또한, 다공성 콘크리트의 단위질량과 총 공극률, 열전도도 상관관계 그래프를 제시하여 해외 실험 사례와 비교 분석하였다. 이후 실험 결과에 대한 회귀 분석을 진행하여 상관계수(R²) 값을 분석하였다.

• 한국건설순환자원학회논문집
• /
• 제4권1호
• /
• pp.96-100
• /
• 2009

모재콘크리트의 품질이 각기 다른 순환잔골재의 특성을 모르타르 시험에 의해 비교 고찰하였다. 모재콘크리트 강도가 클수록 밀도가 컸으며, 부착 시멘트페이스트의 공극량이 감소하므로 흡수율은 작게 나타났다. 순환잔골재를 사용한 모르타르의 압축강도 및 휨강도 특성은 신모르타르의 계면영역과 순환잔골재에 부착된 모르타르의 강도에 의해 지배적인 영향을 받으며, 모재콘크리트의 강도가 작을수록 다공성 재료가 되므로 강도발현이 작게 나타났다. 재령 180일에서 순환잔골재를 사용한 모르타르의 건조수축은 약 $1800{\sim}2000{\mu}m/m$ 정도로 천연잔골재를 사용한 모르타르보다 1.5배 정도 크게 나타났는데 이것은 순환잔골재에 부착된 모르타르가 다공성으로 흡수율이 크기 때문에 나타난 결과로 판단된다. 그러나 동결융해시험에서 순환잔골재를 사용한 모르타르의 내구성은 천연골재와 비슷한 수준으로 모재콘크리트의 강도에 의한 영향은 크지 않은 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.225-227
• /
• 2011

This study investigates the effect of crushed fine aggregate and chemical admixture (durability improvement agent, named DIA) on blast furnace slag-based brick. The control brick was made with recycled fine aggregate of 100% and, no cement was used. Test results showed that all specimens developed similar strength, except for the specimen without partial replacement of crushed fine aggregate at 3 days. However, it is interesting to note that this specimen without crushed fine aggregate resulted in the highest strength at 7 days. In addition, the DIA had a major effect on the absorption ratio of brick specimens. For the brick specimens with partial replacement of crushed fine aggregate with 10%, the addition of DIA with only 1% was enough to satisfy the code regulated by KS F 4004.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.95-104
• /
• 2005

습식 및 건식 생산방식에 의해 생산된 양질의 재생 잔골재를 사용한 콘크리트의 특성을 분석하여 콘크리트용 재생 잔골재로서의 활용가능성에 대해 연구 분석한 결과는 다음과 같다. 재생 잔골재 콘크리트의 공기량은 재생 잔골재의 생산시 포함된 모르타르로 인해 치환률 증가에 따라 공기량이 상승되는 것으로 나타났다. 하지만 건식 생산된 잔골재를 사용한 콘크리트의 경우, 공기량의 증가율이 상대적으로 낮았다. 슬럼프는 습식 및 건식 생산공정과는 관계없이 재생 잔골재의 치환율이 증가됨에 따라 전체적으로 감소되는 경향을 보였다. 이는 재생 잔골재에 있는 모르타르 입자가 콘크리트의 잉여수를 흡착하여 유동성을 저하시켰기 때문인 것으로 판단된다. 압축강도는 재생 잔골재 치환율이 증가함에 따라 전반적으로 감소되는 것으로 나타났으나, 배합에 따라 재생 잔골재 치환율 25, 50%에서 물시멘트비 감소효과에 의한 부분적 증가 현상도 나타났다. 이러한 현상은 조기재령에서도 동일하게 나타나 재생골재콘크리트의 현장적용시에도 응결지연 등에 대한 우려는 없을 것으로 판단된다. 인장강도 결과 역시, 습식 및 건식 재생 잔골재 혼입률 25% 수준에서 가장 우수한 인장강도를 보였다 이를 종합하면, 재생 잔골재의 종류 및 물리적 성질에 따라 다소 차이는 예상되나, 콘크리트용 골재로서 건식 및 습식 생산된 재생 잔골재를 콘크리트용 골재로서 대체 사용하는 경우, 물시멘트비 등에 따라 다소 차이는 있었으나 전반적으로 치환율 25%이하에서는 물리적 역학적 성질에 심각한 저하 현상 없이 콘크리트의 제성질 발현이 가능한 것으로 판단된다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.411-414
• /
• 2003

This study is performed to examine the physical and mechanical properties of recycled polymer concrete using recycled coarse aggregate and recycled fine aggregate. Tests for compressive strength, flexural strength and pulse velocity with replacement ratio of recycled coarse aggregate and recycled fine aggregate are performed. As a result, compressive strength, flexural strength and pulse velocity of polymer concrete containing recycled coarse aggregate are in the range of $826{\sim}849kgf/cm^2,\;192{\sim}200kgf/cm^2\;and\;3,932{\sim}4,000m/s$, respectively. Compressive strength, flexural strength and pulse velocity of polymer concrete containing crushed stone only are $805kgf/cm^2,\;197kgf/cm^2$ and 3,931 m/s, respectively. Accordingly, recycled aggregates is expected that can be utilizing as an aggregate of polymer concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.46-47
• /
• 2015

This study has analyzed the engineering characteristics of resource-cycling mortar according to the variation of fine aggregate type using illite with high development potentials by setting the goal as developing eco-friendly construction materials. As a result, while flow has increased if recycled fine aggregate and waste refractory are used separately or mixing them adequately in case of flow and compressive strength, the flow had somewhat declined followed by illite replacement. However, the possibility of such usage is determined to be adequate if used by mixing illite, recycled fine aggregate and waste refractory properly due to the dry shrinkage effect.

• Advances in concrete construction
• /
• 제9권2호
• /
• pp.207-215
• /
• 2020

This paper describes the experimental studies carried out to determine the properties of fresh and hardened concrete with Recycled Plastic Waste (RPW) as a partial replacement material for fine aggregates. In the experimental study, RPW was used for replacing river sand and manufactured sand (M sand) aggregates in concrete. The replacement level of fine aggregates was ranging from 5% to 20% by volume with an increment of 5%. M40 grade of concrete with water cement ratio of 0.40 was used in this study. Two different types of RPW were used, and they are (i) un-activated RPW and (ii) activated RPW. The activated RPW was obtained by alkali activation of un-activated RPW using NaOH solution. The hardened properties of the concrete determined were dry density, compressive strength, split tensile strength, flexural strength and ultrasonic pulse velocity (UPV). The properties of the concrete with river sand, M sand, activated RPW and un-activated RPW were compared and inferences were drawn. The effect of activation using NaOH solution was investigated using FT-IR study. The micro structural examination of hardened concrete was carried out using Scanning Electron Microscopy (SEM). The test results show that the strength of concrete with activated RPW was more than that of un-activated RPW. From the results, it is evident that it is feasible to use 5% un-activated RPW and 15% activated RPW as fine aggregates for making concrete without affecting the strength properties.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.124-125
• /
• 2020

In this study, the characteristics of fine aggregates produced according to the jaw crush crushing gap variation were studied and analyzed in terms of recycled aggregates, and the experiments were conducted in terms of grading, density, water absorption, unit volume weight, grain shape. It was shown that the quality of the fine aggregate was affected by the shape of the morphological crushing.

• 대한건축학회논문집:구조계
• /
• 제34권8호
• /
• pp.3-11
• /
• 2018

In this study, total nine R/C beams, designed by the PVA Fiber with ground granulated blast furnace slag and recycled fine aggregate were constructed and tested under monotonic loading. In the material development, micromechanics was adopted to properly select the optimized range of the composite based on steady-state cracking theory and experimental studies on the matrix and interracial properties. Experimental programs were carried out to improve and evaluate the structural performance of the test specimens: the load-displacement, the failure mode, the maximum strength, and ductility capacity were assessed. Test results showed that test specimens (BSPR-20, 40) was increased the maximum load carrying capacity by 3~6% and the ductility capacity by 9~14% in comparison with the standard specimen (BSS). And the specimens (BSPR-60, 80, 100) was decreased the maximum load carrying capacity by 0~4% and the ductility capacity by 79% in comparison with the standard specimen (BSS) respectively.

• 대한건축학회논문집:구조계
• /
• 제34권11호
• /
• pp.11-18
• /
• 2018

In this study, seven R/C beams, designed by the steel fiber with ground granulated blast furnace slag and recycled fine aggregate were constructed and tested under monotonic loading. In the material development, micromechanics was adopted to properly select the optimized range of the composite based on steady-state cracking theory and experimental studies on the matrix and interracial properties. Experimental programs were carried out to improve and evaluate the structural performance of the test specimens: the load-displacement, the failure mode, the maximum strength were assessed. Test results showed that test specimens (BSSR-20, 40, 60, 80) were increased the maximum load carrying capacity by 2~9% and the ductility capacity by 10~22% in comparison with the standard specimen (BSS) respectively. And the specimens (BSSR-100) was decreased the maximum load carrying capacity by 5% and the ductility capacity by 44% in comparison with the standard specimen (BSS) respectively.