• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1115-1122
• /
• 2002

The present experiment investigates the effects of pore density f of aluminum foam heat sinks, the jet-to-jet spacing X and the nozzle plate-to-target surface spacing H of 3$\times$3 square impinging arrays on the averaged Nusselt number. The performance of the aluminum foam heat sinks and the rectangular plate heat sink is evaluated in terms of the enhancement factor. /equation omitted/. The multiple impinging jet with X/d=4.0 displays higher Nusselt numbers than single impinging jet for 12.0$\leq$H/d$\leq$20.0. With the variation of the jet-to-jet spacing, the aluminum foam heat sink of 10 PPI show higher Nusselt numbers than the 20 and 40 PPI aluminum foam heat sinks. Further, the 10 PPI aluminum foam heat sink demonstrates 26% higher enhancement factor than the rectangular plate heat sink in the range of 7000$\leq$Re$\leq$11000.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.98-109
• /
• 2016

The flow and heat transfer characteristics of a heat exchanger having rectangular pin-fin in the flow direction have been investigated numerically. On the bottom plate, the convective boundary conditions for the hot side was given, and the fins were arranged in a channel-type geometric model using the periodic boundary condition in the span-wise direction. Three-dimensional numerical calculations for the flow and conjugate heat transfer problem were conducted using SIMPLE algorithm and $k-{\varepsilon}$ turbulence model. For the slanted pin-fin models, it was found that the downward cooling flow is generated due to the downward pressure gradient component, which can enhance the heat transfer performance near the bottom surface and the fin stem region. Four different inclined angles were considered in the Reynolds number range of 13,500-55,000. The aero-thermal performance of the slanted pin-fin heat exchangers, such as the volume and area goodness factors, were summarized and compared with the baseline plate-fin type heat exchanger quantitatively.

• 태양에너지
• /
• 제17권3호
• /
• pp.67-73
• /
• 1997

공기는 열전도 계수가 낮으므로 밀폐공간 내에서 적당한 형태를 형성하여 자연대류 열전달을 촉진 시키다면 태양열 집열기로서 건물 난방에 이용할 수 있고, 또 자연대류가 일어나지 않도록 유동을 억제 시킨다면 매우 훌륭한 단열재로 사용할 수 있다. 따라서, 본 연구에서는 건물벽 구조에 따라 내 외벽 사이에 단순 사각 밀폐공간을 형성하여 외벽의 가열부와 내벽의 방열부의 위치를 변화시켜 가며 수치해석을 수행하여 최대 난방 및 단열효과를 얻을 수 있는 새로운 대체 건물벽 개발에 관한 기초 설계 자료를 제시하고자 한다. 연구 결과 부력에 의한 driving force를 얻기 위해서는 방열부가 가열부보다 항상 위쪽에 위치하고 크기는 전체 높이의 1/2 이하일 때 열전달이 촉진됨을 알았다.