• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1393-1401
• /
• 2013

What is RFID Microchip tag attached to an object, the reader recognizes technology collectively, through communication with the server to authenticate the object. A variety of RFID tags, 13.56Mhz bandwidth RFID card, ISO/IEC 14443 standards based on NXP's Mifare tag occupies 72.5% of the world market. Of the Mifare tags, low cost tag Mifare Classic tag provided in accordance with the limited hardware-based security operations, protocol leaked by a variety of attacks and key recovery vulnerability exists. Therefore, in this paper, Cryptography Scheme and Secure Protocol for Safety Secure Scheme Construction in 13.56Mhz RFID have been designed. The proposed security scheme that KS generated by various fixed values and non-fixed value, S-Box operated, values crossed between LFSR and S-Box is fully satisfied spoofing, replay attacks, such as vulnerability of existing security and general RFID secure requirement. Also, It is designed by considering the limited hardware computational capabilities and existing security schemes, so it could be suit to Mifare Classic now.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.5
• /
• pp.29-40
• /
• 2009

In general, understanding groundwater flow in fractured bedrock is critical during tunnel and underground cavern construction. In that case, borehole data may be useful to examine groundwater flow properties of the fractured bedrock from pre-excavation until completion stages, yet sufficient borehole data is not often available to acquire. This study evaluated groundwater discharge rate into Jikri tunnel in Gyeonggi province using hydraulic parameters, groundwater level data in the later stage of tunneling, national groundwater monitoring network data, and electrical resistivity survey data. Groundwater flow rate into the tunnel by means of analytical method was estimated $7.12-74.4\;m^3/day/m$ while the groundwater flow rate was determined as $64.8\;m^3/day/m$ by means of numerical modeling. The estimated values provided by the numerical modeling may be more logical than those of the analytical method because the numerical modeling could take into account spatial variation of hydraulic parameters that was not possible by using the analytical method. Transient modeling for a period of one year from the tunnel completion resulted in the recovery of pre-excavation groundwater level.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.470-482
• /
• 1995

The Ulchin 3&4, which are 2825 MWt PWRs, adopted Safety Depressurization System (SDS) to mitigate the beyond design basis event of Total Less of Feedwater(TLOFW). In this study the results and methodology of the analyses for the determination of SDS bleed capacity are discussed. The SDS design bleed capacity has been determined from the CEFLASH-4AS/REM simulation according to the following design criteria : 1) Each SDS flow path, in conjunction with one of two High Pressure Safety Injection (HPSI) pumps, is designed to have a sufficient capacity to prevent core uncovery if one SDS path is opened simultaneously with the opening of the Pressurizer Safety Valves (PSVs). 2) Both SDS bleed paths are designed to have sufficient total capacity with both HPSI pumps operating to prevent core uncovery if the Feed and Bleed (F&B) initiation is delayed up to thirty minutes from the time of the PSVs lift. To verify the results of CEFLASH-4AS/REM simulation a comparative analysis kas also been per-formed by more sophisticated computer code, RELAP5/MOD3. The TLOFW event without operator recovery and TLOFW event with F&B are analyzed. The predictions by the CEFLASH-4AS/REM of the transient too phase system behavior are in good qualitative and quantitative agreement with those by the RELAP5/MOD3 simulation. Both of the results of analyses by CEFLASH-4AS/REM and RELAP5/MOD3 have demonstrated that decay heat removal and core inventory make-up can be successfully accomplished by F&B operation during now event for the Ulchin 3&4.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.492-496
• /
• 2010

This experiment was carried out to obtain the maximum quantity of essential oil on the basis of harvesting time, cultivation regions & types, and drying methods. We have selected 6 native and introduced herbs viz. $Thymus$ $quinquecostatus$, $Agastache$ $rugosa$, $Chrysanthemum$ $indicum$, $Rosmarinus$ $officinalis$, $Chamaemelum$ $nobile$, and $Lavandula$ $stoechas$. The quantity of essential oil ranged from 0.06% to 3.46% in all six herbs. Native herbs produce 30.5% higher quantity of oil in comparison to introduced herbs. The quantity of essential oil obtained from $Lavandula$ $stoechas$ was 3.46%, followed by $Rosmarinus$ $officinalis$ 2.89%, while minimum in $Agastache$ $rugosa$ 0.60%. Higher quantity of essential oil obtained if they are cultivated under rain shelter culture (PE film) in comparison to open field conditions. Recovery of essential oil is always high if herbs flower in July. Semi-alpine region was found better than the plain region for herbs production. Quantity of oil is high if oil is extracted from fresh herbs followed by freezed herbs, shade dry and hot wind dry herbs. As far as plant part is concern flower produced maximum oil than any other part.

• Journal of the Korean Society of Food Culture
• /
• v.29 no.4
• /
• pp.364-371
• /
• 2014

The purpose of this study was to estimate usage of vitamin and mineral supplements as over-the-counter (VM-OTC) drugs as well as examine factors associated with VM-OTC usage in Korean adolescents. A total of 1,407 adolescents attending middle or high school in all parts of country were included in the analysis. Prevalence of VM-OTC usage was 56.1%, and it was higher as monthly income, father's education level, and socioeconomic status of family increased (p<0.001). VM-OTC intake was higher in middle school students than in high school students as well as in rural areas or small & mediumsized city residents than big city residents (p<0.01). Subjects mainly received information on VM-OTC mainly from 'family and relatives' (46.6%), whereas only 20.3% received information from experts. Subjects took VM-OTC 'when they are healthy' (49.1%), 'when they feel sick' (17.7%), 'when they are on a diet' (17.3%), and 'when they are stressful' (15.9%). The effectiveness of taking VM-OTC were mainly 'fatigue recovery' (35.0%), 'health improvement' (30.6%), and 'nutritional status improvement' (13.2%). The most frequently used VM-OTC was vitamin C (49.1%), multi-vitamins (18.6%), multi vitamins & minerals (13.2%), and calcium (9.2%). Among VM-OTC users, only 21.9% replied that they usually check the nutrition facts when they buy products, 62.4% follow the recommended dosage, and 9.7% fully understand the nutrition labels of the products. According to logistic regression analysis, the most influential factor affecting VM-OTC use was parents' and siblings' VM-OTC consumption (p<0.001). In addition, school type (middle or high school) (p<0.01), residence (p<0.05), self-concerns about health (p<0.05), father's education level (p<0.05), and socioeconomic status of family (p<0.05) all influenced VM-OTC use. These results show that VM-OTC use is widespread among adolescents, few users actually check and fully understand the nutrition labels when they purchase VM-OTC, and they are highly dependent on unprofessional advice and information. Therefore, it is necessary to educate adolescents to help them select proper VM-OTC and read nutrition labels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.710-718
• /
• 2017

After Typhoon Chaba (No.18, 2016) collided with Manseongri Beach, a coastal improvement project was carried out since strong external forces such as waves, storm surges and wave-induced currents were observed to cause beach deformation. The shoreline, beach area and beach volume were periodically surveyed. On the basis of this field data, the beach deformation that occurred at Manseongri Beach has been formally described. Over three months after beach nourishment work began, the beaches were gradually stabilized in terms of natural external forces. However, this stabilization was interrupted by Typhoon Chaba. After two months of typhoon weather, the beach returned to a stable state and no changes were observed until one year after the beach recovery work. Just after the typhoon hit, the shoreline receded from the northern side, where no reduction of external forces occurred, while the rear beach area submerged by breakwater advanced. Also, the beach volume decreased by $3,395m^3$ after the typhoon, due to erosion that occurred on the northern beach, with deposition taking place on the southern backshore area. Therefore, it has been concluded that the coastal improvement project undertaken at Manseongri Beach has significantly contributed to conservation in areas of wave-dominant sediment transport.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.66-76
• /
• 2021

Electric arc furnace dust (EAFD) contains compounds, such as oxides and chlorides, including large quantities of Zn, Pb and Fe. An efficient and stable method for the extraction of metal elements from EAFD is the Rotary Kiln Process. This method is used to recover Zn in the form of crude ZnO (approximately 60%) via the addition of a reducing agent (coke, anthracite) and limestone (for basicity control) to EAFD. This process is commonly used in industry as well as in research and development. Currently, this method is used in many Korean commercial plants, producing approximately 150,000 tons of Crude ZnO per year. The majority of Zn is found in crude ZnO (approximately 76%). In addition components such as Pb, Cd, Sn, In, Fe, Cl, and F are present as oxides, chlorides, and alkaline compounds. This elements have an adverse effect on the zinc smelting process. Therefore, a refining process that eliminates these impurities is essential. In this study, we developed a process technology that efficiently separates Zn and Pb from byproducts (mainly chlorides). A bag filter was used to collect Zn and Pb generated during the dry purification process of crude ZnO. Pure components were recovered as metals or metal carbonate.

• Journal of Climate Change Research
• /
• v.3 no.3
• /
• pp.211-224
• /
• 2012

Technology for energy recovery from waste can reduce the greenhouse gas emissions. So recently, there are several companies using RDF, RPF, WCF instead of using only coal fuel and it's part of the fuel on the increase. In this study, we developed Wood chip fuel $CO_2$ emission factor through fuel analysis. It's moisture content is 23%, received net calorific value is 2,845 kcal/kg, and received basis carbon is 34%. The result of emission factor is $105ton\;CO_2/TJ$, it's 5.9% lower than 2006 IPCC guideline default factor $112ton\;CO_2/TJ$. The gross GHG(Greenhouse gases) emissions of plant A is $178,767ton\;CO_2 eq./yr$, and Net GHG emissions is $40,359ton\;CO_2 eq./yr$. Therefore, the reduction of GHG emissions is $138,408ton\;CO_2/yr$ through using WCF, and I accounts for 77% of all GHG emissions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.290-298
• /
• 2019

This study investigated a total of 22 types (15 types of natural disasters and seven types of social disasters) of disaster and safety data based on the National Daily Situation Report, Disaster Yearbook and annual Disaster Annals issued by the Ministry of Public Administration and Security. Disaster safety data were collected from the daily situation report of MOIS (Ministry of the Interior and Safety). The number of total data cases were 1,760, of which 656 were natural disasters and 1,104 were social disasters. The disasters were then patternized according to their characteristics. The patterning was conducted to set up the disaster and safety data system designed to keep disaster situations under prompt and effective management. The study analyzed the data associated with the activities in the response and recovery stages according to the disaster type. Furthermore, based on the management activities performed with the flow of time following a disaster, this study classified and proposed disaster and safety data patterns to achieve effective disaster management work by analyzing the characteristics of a disaster and safety data and disaster and safety management procedures. Disasters of high similarity were classified by merging and deleting them. This was done to consider the scalability and mutual linkage so that it can be used in the establishment of national statistical data, such as the disaster annual report and disaster annuity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.307-317
• /
• 2019

To develop sustainable new natural anti-aging ingredients from Korean native plants, we investigated the cultivation potential of Nymphoides indica using the eco-friendly aquaponics system, and tested the anti-aging effects from N. indica extracts. N. indica could be grown in aquaponics system using floating leaved deep water culture method, and propagated through rhizome propagation. It was confirmed that the nitrate ($80{\mu}g/mL$), potassium ($63.5{\mu}g/mL$) and water temperature ($25^{\circ}C$) greatly affected the cultivation of the N. indica. In addition, synergistic effects were found when two major components (3,7-di-O-methylquercetin-4'-O-${\beta}$-glucoside & sweroside) were present at more than about $5{\mu}g/mL$. The extract had a significant effect on the recovery of skin cells damaged by environmental pollutant such as $benzo[{\alpha}]pyrene$, ammonium nitrate, formaldehyde. It also suppressed $PGE_2$, $TNF-{\alpha}$ and COX-2, and inhibited the production of MMP-1. Taken together, the results suggested that the standardized extracts of N. indica cultivated in the aquaponics has considerable potential as a new cosmetics ingredient with an anti-aging effect.